+Článek 26 Plány reakce a obnovy v oblasti IKT
---+Článek 26 1.
---+Článek 26 2.
---+Článek 26 3.
---+Článek 26 4.

Článek 26 Plány reakce a obnovy v oblasti IKT

1. Přehled

Název	Regulace
Článek 26 1.	Při vypracovávání plánů reakce a obnovy v oblasti IKT uvedených v čl. 11 odst. 3 nařízení (EU) 2022/2554 finanční subjekty zohlední výsledky analýzy dopadu na činnost finančního subjektu. Tyto plány reakce a obnovy v oblasti IKT: a) specifikují podmínky, které vedou k jejich aktivaci nebo deaktivaci, a případné výjimky z této aktivace nebo deaktivace; b) popisují, jaká opatření mají být přijata k zajištění dostupnosti, integrity, kontinuity a obnovy alespoň u systémů a služeb IKT, které podporují zásadní nebo důležité funkce finančního subjektu; c) jsou navrženy tak, aby splňovaly cíle pro obnovu operací finančních subjektů; d) jsou zdokumentovány a zpřístupněny zaměstnancům zapojeným do provádění plánů reakce a obnovy v oblasti IKT a jsou v případě nouze snadno dostupné; e) poskytují krátkodobé i dlouhodobé možnosti obnovy, včetně částečné obnovy systémů; f) stanoví cíle plánů reakce a obnovy v oblasti IKT a podmínky pro to, aby mohlo být konstatováno úspěšné provedení těchto plánů. Pro účely písmene d) finanční subjekty jasně určí úlohy a povinnosti.
Článek 26 2.	V plánech reakce a obnovy v oblasti IKT uvedených v odstavci 1 se určí příslušné scénáře, včetně scénářů závažných narušení činnosti a zvýšené pravděpodobnosti výskytu narušení. V těchto plánech jsou vypracovány scénáře založené na aktuálních informacích o hrozbách a na zkušenostech z předchozích případů narušení činnosti. Finanční subjekty řádně zohlední všechny následující scénáře: a) kybernetické útoky a přechod z primární infrastruktury IKT na rezervní kapacitu, záložní a rezervní zařízení; b) scénáře, při nichž se kvalita poskytování zásadní nebo důležité funkce sníží na nepřijatelnou úroveň nebo selže úplně, a potenciální dopad platební neschopnosti nebo jiných selhání jakéhokoli příslušného poskytovatele služeb IKT z řad třetích stran; c) částečné nebo úplné selhání prostor, včetně kancelářských a obchodních prostor a datových center; d) závažné selhání aktiv v oblasti IKT nebo komunikační infrastruktury; e) nedostupnost kritického počtu zaměstnanců nebo zaměstnanců odpovědných za zajištění zachování provozu; f) dopad změny klimatu a událostí souvisejících se zhoršováním životního prostředí, přírodních katastrof, pandemií a fyzických útoků, včetně vniknutí a teroristických útoků; g) útoky zevnitř; h) politická a sociální nestabilita, a to i případně v jurisdikci poskytovatele služeb IKT z řad třetích stran a v místě, kde jsou uloženy a zpracovávány údaje; i) rozsáhlé výpadky proudu.
Článek 26 3.	Pokud primární opatření pro obnovu nebudou v krátkodobém horizontu proveditelná z důvodu nákladů, rizik, logistiky nebo nepředvídaných okolností, zváží se v plánech reakce a obnovy v oblasti IKT uvedených v odstavci 1 alternativní možnosti.
Článek 26 4.	V rámci plánů reakce a obnovy v oblasti IKT uvedených v odstavci 1 finanční subjekty zváží a zavedou opatření pro zajištění kontinuity s cílem zmírnit selhání poskytovatelů služeb IKT z řad třetích stran, kteří poskytují služby IKT podporující zásadní nebo důležité funkce finančního subjektu.

1.1 Odkazy

1.2 Identifikované požadavky

1.3 Související standardy

2. Identifikované požadavky

Požadavky
Zdroj	Požadavek

3. Související standardy

Standardy
Zdroj	Požadavek
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Time / Point Objectives (RTO / RPO) Description Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Operations Criteria Description Mechanisms exist to define specific criteria that must be met to initiate Business Continuity / Disaster Recovery (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. ▪ Recovery Time Objectives (RTOs) and/or Recovery Point Objectives (RPOs) are not formally planned for or resourced to meet. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to define specific criteria that must be met to initiate Business Continuity / Disaster Recover (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Operations Criteria Description Mechanisms exist to define specific criteria that must be met to initiate Business Continuity / Disaster Recovery (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. ▪ Recovery Time Objectives (RTOs) and/or Recovery Point Objectives (RPOs) are not formally planned for or resourced to meet. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to define specific criteria that must be met to initiate Business Continuity / Disaster Recover (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Coordinate With External Service Providers Description Mechanisms exist to coordinate internal contingency plans with those of external service providers to ensure that organizational resiliency requirements can be satisfied. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to coordinate internal contingency plans with the contingency plans of external service providers to ensure that contingency requirements can be satisfied. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Contingency Plan Root Cause Analysis (RCA) & Lessons Learned Description Mechanisms exist to conduct a Root Cause Analysis (RCA) and "lessons learned" activity every time the contingency plan is activated. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to conduct a Root Cause Analysis (RCA) and "lessons learned" activity every time the contingency plan is activated. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Alternate Processing Site Description Mechanisms exist to establish an alternate processing site that provides processing capability and security measures equivalent to that of the primary site. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud) ∙ Documented recovery procedures to cloud fallback Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud) ∙ Basic DR runbooks and cloud failover procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Cloud-based warm/hot site (AWS, Azure, GCP) ∙ Managed DR service (e.g., AWS Elastic Disaster Recovery, Azure Site Recovery) ∙ Documented and tested failover procedures Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ AWS Elastic Disaster Recovery or Azure Site Recovery ∙ Cloud-based or colocation alternate processing site ∙ Regular failover testing with documented RTO/RPO validation Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise DR platform with automated failover (e.g., Zerto, Veeam Replication, AWS DRS) ∙ Geographically separate alternate processing site (cloud or colocation) ∙ Regularly tested failover with RTO/RPO compliance verification ∙ NIST SP 800-34 contingency planning alignment SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to establish an alternate processing site that provides security measures equivalent to that of the primary site. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Inability to Return to Primary Site Description Mechanisms exist to plan and prepare for both natural and manmade circumstances that would prevent return to the primary site. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to plan and prepare for both natural and manmade circumstances that preclude returning to the primary site. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Personnel Transfer to Alternate Processing / Storage Site Description Mechanisms exist to redeploy personnel to other roles during a disruptive event or in the execution of a continuity plan. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to redeploy personnel to other roles during a disruptive event or in the execution of a continuity plan. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Telecommunications Services Availability Description Mechanisms exist to reduce the likelihood of a single point of failure with primary telecommunications services. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Alternate / redundant telecommunications services are maintained with more than one telecom / Internet provider. Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Alternate / redundant telecommunications services are maintained with more than one telecom / Internet provider. Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Alternate / redundant telecommunications services are maintained with more than one telecom / Internet provider. Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Alternate / redundant telecommunications services are maintained with more than one telecom / Internet provider. Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Alternate / redundant telecommunications services are maintained with more than one telecom / Internet provider. SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to reduce the likelihood of a single point of failure with primary telecommunications services. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Technology Assets, Applications and/or Services (TAAS) Recovery & Reconstitution Description Mechanisms exist to ensure the secure recovery and reconstitution of Technology Assets, Applications and/or Services (TAAS) to a known state after a disruption, compromise or failure. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Virtual machines ∙ Acronis (https://acronis.com) ∙ Documented system recovery runbooks Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Virtual machines ∙ Acronis (https://acronis.com) ∙ Docker (https://docker.com) ∙ Documented system recovery runbooks and checklists Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Virtual machines ∙ Docker (https://docker.com) ∙ Acronis Cyber Backup (https://acronis.com) ∙ CimTrak Integrity Suite (https://cimcor.com/cimtrak) ∙ Documented and tested recovery runbooks Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise DR platform (e.g., Veeam, Zerto, AWS DRS) ∙ Docker (https://docker.com) ∙ CimTrak Integrity Suite (https://cimcor.com/cimtrak) ∙ Tested recovery runbooks with RTO/RPO validation Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise recovery and reconstitution platform (e.g., Commvault, Veeam Enterprise, Rubrik) ∙ Automated recovery orchestration (e.g., Zerto, AWS DRS) ∙ IaC-based reconstitution (Terraform, Ansible) ∙ CimTrak Integrity Suite (https://cimcor.com/cimtrak) ∙ Regularly tested recovery with documented evidence SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to ensure the secure recovery and reconstitution of Technology Assets, Applications and/or Services (TAAS) to a known state after a disruption, compromise or failure. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Technology Assets, Applications and/or Services (TAAS) Recovery & Reconstitution Description Mechanisms exist to ensure the secure recovery and reconstitution of Technology Assets, Applications and/or Services (TAAS) to a known state after a disruption, compromise or failure. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Virtual machines ∙ Acronis (https://acronis.com) ∙ Documented system recovery runbooks Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Virtual machines ∙ Acronis (https://acronis.com) ∙ Docker (https://docker.com) ∙ Documented system recovery runbooks and checklists Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Virtual machines ∙ Docker (https://docker.com) ∙ Acronis Cyber Backup (https://acronis.com) ∙ CimTrak Integrity Suite (https://cimcor.com/cimtrak) ∙ Documented and tested recovery runbooks Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise DR platform (e.g., Veeam, Zerto, AWS DRS) ∙ Docker (https://docker.com) ∙ CimTrak Integrity Suite (https://cimcor.com/cimtrak) ∙ Tested recovery runbooks with RTO/RPO validation Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise recovery and reconstitution platform (e.g., Commvault, Veeam Enterprise, Rubrik) ∙ Automated recovery orchestration (e.g., Zerto, AWS DRS) ∙ IaC-based reconstitution (Terraform, Ansible) ∙ CimTrak Integrity Suite (https://cimcor.com/cimtrak) ∙ Regularly tested recovery with documented evidence SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to ensure the secure recovery and reconstitution of Technology Assets, Applications and/or Services (TAAS) to a known state after a disruption, compromise or failure. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Redundant Secondary System Description Mechanisms exist to maintain a failover capability, which is not collocated with the primary Technology Asset, Application and/or Service (TAAS), which can be activated with little-to-no loss of information or disruption to operations. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to maintain a failover capability, which is not collocated with the primary Technology Asset, Application and/or Service (TAAS), which can be activated with little-to-no loss of information or disruption to operations. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Impact Analysis (BIA) Description Mechanisms exist to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Risk Management (RSK) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Risk management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ Risk management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Risk management processes (e.g., risk assessments) and technologies focus on protecting High Value Assets (HVAs), including environments where sensitive/regulated data is stored, transmitted and processed. ▪ IT and/or cybersecurity personnel implement and maintain a form of Risk Management Program (RMP) that provides operational guidance on how risk is identified, assessed, remediated and reported. ▪ Data/process owners are expected to self-manage risks associated with their systems, applications, services and data, based on the organization's published policies and standards, including the identification, remediation and reporting of risks. ▪ Business process owners (BPOs) are made aware of cybersecurity and data protection risk(s). Level 3 Well Defined Risk Management (RSK) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are well-documented and kept current by process owners. ▪ A risk management team, or similar function, is appropriately staffed and supported to implement and maintain RSK domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of risk management operations (e.g., risk management solution, GRC platform and TPRM tool). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks. Level 4 Quantitatively Controlled Risk Management (RSK) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Compensating Countermeasures Description Mechanisms exist to identify and implement one, or more, compensating controls to reduce risk and threat exposure when the primary means of implementing the security function is unavailable or compromised. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Risk Management Program (RMP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Risk Management Program (RMP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Risk Management Program (RMP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Risk Management Program (RMP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Risk Management Program (RMP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Risk Management (RSK) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Risk management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ Risk management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Risk management processes (e.g., risk assessments) and technologies focus on protecting High Value Assets (HVAs), including environments where sensitive/regulated data is stored, transmitted and processed. ▪ IT and/or cybersecurity personnel implement and maintain a form of Risk Management Program (RMP) that provides operational guidance on how risk is identified, assessed, remediated and reported. ▪ Data/process owners are expected to self-manage risks associated with their systems, applications, services and data, based on the organization's published policies and standards, including the identification, remediation and reporting of risks. ▪ Business process owners (BPOs) are made aware of cybersecurity and data protection risk(s). Level 3 Well Defined Risk Management (RSK) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are well-documented and kept current by process owners. ▪ A risk management team, or similar function, is appropriately staffed and supported to implement and maintain RSK domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of risk management operations (e.g., risk management solution, GRC platform and TPRM tool). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to identify and implement compensating countermeasures to reduce risk and exposure to threats. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Third-Party Incident Response & Recovery Capabilities Description Mechanisms exist to ensure response/recovery planning and testing are conducted with critical suppliers/providers. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. Level 2 Planned Tracked Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners. ▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to ensure response/recovery planning and testing are conducted with critical suppliers/providers. Level 4 Quantitatively Controlled Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Third-Party Incident Response & Recovery Capabilities Description Mechanisms exist to ensure response/recovery planning and testing are conducted with critical suppliers/providers. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program ∙ Third-party contract requirements for cybersecurity controls SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. Level 2 Planned Tracked Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners. ▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to ensure response/recovery planning and testing are conducted with critical suppliers/providers. Level 4 Quantitatively Controlled Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.

Builddate: 25.06.2024 00:00:00 -Doknr: CELEX:32024R1774
EULAW -
European Regulation published on http://eur-lex.europa.eu/

Článek 26 Plány reakce a obnovy v oblasti IKT

1. Přehled

1.1 Odkazy

1.2 Identifikované požadavky

1.3 Související standardy

2. Identifikované požadavky

3. Související standardy

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2