+Article 24 Obligations of distributors

Article 24 Obligations of distributors

Article 24

Obligations of distributors

1.   Before making a high-risk AI system available on the market, distributors shall verify that it bears the required CE marking, that it is accompanied by a copy of the EU declaration of conformity referred to in Article 47 and instructions for use, and that the provider and the importer of that system, as applicable, have complied with their respective obligations as laid down in Article 16, points (b) and (c) and Article 23(3).

2.   Where a distributor considers or has reason to consider, on the basis of the information in its possession, that a high-risk AI system is not in conformity with the requirements set out in Section 2, it shall not make the high-risk AI system available on the market until the system has been brought into conformity with those requirements. Furthermore, where the high-risk AI system presents a risk within the meaning of Article 79(1), the distributor shall inform the provider or the importer of the system, as applicable, to that effect.

3.   Distributors shall ensure that, while a high-risk AI system is under their responsibility, storage or transport conditions, where applicable, do not jeopardise the compliance of the system with the requirements set out in Section 2.

4.   A distributor that considers or has reason to consider, on the basis of the information in its possession, a high-risk AI system which it has made available on the market not to be in conformity with the requirements set out in Section 2, shall take the corrective actions necessary to bring that system into conformity with those requirements, to withdraw it or recall it, or shall ensure that the provider, the importer or any relevant operator, as appropriate, takes those corrective actions. Where the high-risk AI system presents a risk within the meaning of Article 79(1), the distributor shall immediately inform the provider or importer of the system and the authorities competent for the high-risk AI system concerned, giving details, in particular, of the non-compliance and of any corrective actions taken.

5.   Upon a reasoned request from a relevant competent authority, distributors of a high-risk AI system shall provide that authority with all the information and documentation regarding their actions pursuant to paragraphs 1 to 4 necessary to demonstrate the conformity of that system with the requirements set out in Section 2.

6.   Distributors shall cooperate with the relevant competent authorities in any action those authorities take in relation to a high-risk AI system made available on the market by the distributors, in particular to reduce or mitigate the risk posed by it.

1. Übersicht

1.1 Referenzen

1.2 Identifizierte Anforderungen

1.3 Related Standards

2. Identifizierte Anforderungen

Anforderungen

3. Related Standards

Standards
SCF Legal Assessment of Investigative Inquires

Description

Mechanisms exist to determine whether a government agency has an applicable and valid legal basis to request data from the organization and what further steps need to be taken, if necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Legal review

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Legal review

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Legal review

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Legal review

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Legal review

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards, procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.
▪ IT and/or cybersecurity personnel work with the organization's legal counsel for guidance on how to respond to legal orders (e.g., court orders, investigations, etc.).

Level 3 Well Defined

Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to determine whether a government agency has an applicable and valid legal basis to request data from the organization and what further steps need to be taken, if necessary.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Formal software release management process with security review

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise software release management platform with security gates (e.g., JFrog Artifactory)
∙ Release approval workflows

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards, procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218, NIST SP 800-160, etc.).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution, software testing tools, etc.).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
Impressum Deutsch Englisch