ANNEX I EU TYPE-APPROVAL IN RESPECT OF THE SOUND LEVEL OF A VEHICLE TYPE

0.1. Make (trade name of manufacturer):

0.2. Type:

0.3. Means of identification of type, if marked on the vehicle (b):

0.3.1. Location of that marking:

0.4. Category of vehicle (c):

0.5. Company name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer's representative (if any):

1.1. Photographs and/or drawings of a representative vehicle:

1.3. Number of axles and wheels (4):

1.3.3. Powered axles (number, position, interconnection):

1.6. Position and arrangement of the engine:

2.4. Range of vehicle dimensions (overall):

2.4.1. For chassis without bodywork:

2.4.1.1. Length (g5):

2.4.1.2. Width (g7):

2.4.2. For chassis with bodywork:

2.4.2.1. Length (g5):

2.4.2.2. Width (g7):

2.6. Mass in running order (h)

2.8. Technically permissible maximum laden mass stated by the manufacturer (i) (3):

3.1. Manufacturer of the engine:

3.1.1. Manufacturer's engine code (as marked on the engine, or other means of identification):

3.2. Internal combustion engine

3.2.1.1. Working principle: positive ignition/compression ignition, cycle four-stroke/two-stroke/rotary (1)

3.2.1.2. Number and arrangement of cylinders:

3.2.1.2.3. Firing order:

3.2.1.3. Engine capacity (m): … cm3

3.2.1.8. Maximum net power (n): … kW at … min–1 (manufacturer's declared value)

3.2.4. Fuel feed

3.2.4.2. By fuel injection (compression ignition only): yes/no (1)

3.2.4.2.2. Working principle: Direct injection/pre-chamber/swirl chamber (1)

3.2.4.2.4. Governor

3.2.4.2.4.1. Type:

3.2.4.2.4.2.1. Speed at which cut-off starts under load: … min–1

3.2.4.3. By fuel injection (positive ignition only): yes/no (1)

3.2.4.3.1. Working principle: Intake manifold (single-/multi-point (1))/direct injection/other (specify) (1)

3.2.8. Intake system

3.2.8.1. Pressure charger: yes/no (1)

3.2.8.4.2. Air filter, drawings: or

3.2.8.4.2.1. Make(s):

3.2.8.4.2.2. Type(s):

3.2.8.4.3. Intake silencer, drawings: or

3.2.8.4.3.1. Make(s):

3.2.8.4.3.2. Type(s):

3.2.9. Silencing system

3.2.9.2. Description and/or drawing of the silencing system:

3.2.9.4. Exhaust silencer(s):

3.2.9.5. Location of the exhaust outlet:

3.2.9.6. Exhaust silencer containing fibrous materials:

3.2.12.2.1. Catalytic convertor: yes/no (1)

3.2.12.2.1.1. Number of catalytic convertors and elements (provide the information below for each separate unit):

3.2.12.2.6. Particulate trap: yes/no (1)

3.3. Electric motor

3.3.1. Type (winding, excitation):

3.3.1.1. Maximum hourly output: … kW

3.3.1.2. Operating voltage: … V

3.4. Engines or motors or combinations thereof

3.4.1. Hybrid electric vehicle: yes/no (1)

3.4.2. Category of hybrid electric vehicle: off-vehicle charging/non off-vehicle charging (1)

3.4.3 Operating mode switch: with/without (1)

3.4.3.1. Selectable modes

3.4.3.1.1. Pure electric: yes/no (1)

3.4.3.1.2. Pure fuel consuming: yes/no (1)

3.4.3.1.3. Hybrid modes: yes/no (1) (if yes, short description):

3.4.5. Electric motor (describe each type of electric motor separately)

3.4.5.1. Make:

3.4.5.2. Type:

3.4.5.4. Maximum power: … kW

4.2. Type (mechanical, hydraulic, electric, etc.):

4.6. Gear ratios

4.7. Maximum vehicle design speed (in km/h) (q):

6.6. Tyres and wheels

6.6.1. Tyre/wheel combination(s)

6.6.2. Upper and lower limits of rolling radii

6.6.2.1. Axle 1:

6.6.2.2. Axle 2:

6.6.2.3. Axle 3:

6.6.2.4. Axle 4:

9.1. Type of bodywork using the codes defined in Part C of Annex II to Directive 2007/46/EC:

9.2. Materials used and method of construction:

12.5. Details of any non-engine devices designed to reduce noise (if not covered by other items):

0.1. Make (trade name of manufacturer):

0.2. Type:

0.3. Means of identification of type if marked on the vehicle ( 3 ):

0.3.1. Location of that marking:

0.4. Category of vehicle ( 4 ):

0.5. Company name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer's representative (if any):

1. Additional information (where applicable): See Addendum

2. Technical service responsible for carrying out the tests:

3. Date of test report:

4. Number of test report:

5. Remarks (if any): See Addendum

6. Place:

7. Date:

8. Signature:

1.1. Power plant

1.1.1. Manufacturer of the engine:

1.1.2. Manufacturer's engine code:

1.1.3. Maximum net power (g): … kW at … min -1 or maximum continuous rated power (electric motor) … kW ( 5 )

1.1.4. Pressure charger(s), make and type:

1.1.5. Air filter, make and type:

1.1.6. Intake silencer(s), make and type:

1.1.7. Exhaust silencer(s), make and type:

1.1.8. Catalyst(s), make and type:

1.1.9. Particulate trap(s), make and type:

1.2. Transmission

1.2.1. Type (mechanical, hydraulic, electric, etc.):

1.3. Non-engine devices designed to reduce noise:

2.1. Sound level of moving vehicle: … dB(A)

2.2. Sound level of stationary vehicle: … dB(A) at … min-1

2.2.1. Sound level of compressed air, service brake: … dB(A)

2.2.1. Sound level of compressed air, parking brake: … dB(A)

2.2.1. Sound level of compressed air, during the pressure regulator actuation: … dB(A)

2.3. Data to facilitate in-use compliance test of hybrid electric vehicles, where an internal combustion engine cannot operate when the vehicle is stationary

2.3.1. Gear (i) or position of the gear selector chosen for the test:

2.3.2. Position of the operating switch during measurement Lwot,(i) (if switch is fitted)

2.3.3. Pre-acceleration length lPA … m

2.3.4. Vehicle speed at the beginning of the acceleration … km/h

2.3.5. Sound pressure level Lwot,(i) … dB(A)