1.   The technical documentation of a high-risk AI system shall be drawn up before that system is placed on the market or put into service and shall be kept up-to date.

The technical documentation shall be drawn up in such a way as to demonstrate that the high-risk AI system complies with the requirements set out in this Section and to provide national competent authorities and notified bodies with the necessary information in a clear and comprehensive form to assess the compliance of the AI system with those requirements. It shall contain, at a minimum, the elements set out in Annex IV. SMEs, including start-ups, may provide the elements of the technical documentation specified in Annex IV in a simplified manner. To that end, the Commission shall establish a simplified technical documentation form targeted at the needs of small and microenterprises. Where an SME, including a start-up, opts to provide the information required in Annex IV in a simplified manner, it shall use the form referred to in this paragraph. Notified bodies shall accept the form for the purposes of the conformity assessment.

2.   Where a high-risk AI system related to a product covered by the Union harmonisation legislation listed in Section A of Annex I is placed on the market or put into service, a single set of technical documentation shall be drawn up containing all the information set out in paragraph 1, as well as the information required under those legal acts.

3.   The Commission is empowered to adopt delegated acts in accordance with Article 97 in order to amend Annex IV, where necessary, to ensure that, in light of technical progress, the technical documentation provides all the information necessary to assess the compliance of the system with the requirements set out in this Section.

1.   Providers of high-risk AI systems shall put a quality management system in place that ensures compliance with this Regulation. That system shall be documented in a systematic and orderly manner in the form of written policies, procedures and instructions, and shall include at least the following aspects:

2.   The implementation of the aspects referred to in paragraph 1 shall be proportionate to the size of the provider’s organisation. Providers shall, in any event, respect the degree of rigour and the level of protection required to ensure the compliance of their high-risk AI systems with this Regulation.

3.   Providers of high-risk AI systems that are subject to obligations regarding quality management systems or an equivalent function under relevant sectoral Union law may include the aspects listed in paragraph 1 as part of the quality management systems pursuant to that law.

4.   For providers that are financial institutions subject to requirements regarding their internal governance, arrangements or processes under Union financial services law, the obligation to put in place a quality management system, with the exception of paragraph 1, points (g), (h) and (i) of this Article, shall be deemed to be fulfilled by complying with the rules on internal governance arrangements or processes pursuant to the relevant Union financial services law. To that end, any harmonised standards referred to in Article 40 shall be taken into account.

1.   Before placing a high-risk AI system on the market, importers shall ensure that the system is in conformity with this Regulation by verifying that:

2.   Where an importer has sufficient reason to consider that a high-risk AI system is not in conformity with this Regulation, or is falsified, or accompanied by falsified documentation, it shall not place the system on the market until it has been brought into conformity. Where the high-risk AI system presents a risk within the meaning of Article 79(1), the importer shall inform the provider of the system, the authorised representative and the market surveillance authorities to that effect.

3.   Importers shall indicate their name, registered trade name or registered trade mark, and the address at which they can be contacted on the high-risk AI system and on its packaging or its accompanying documentation, where applicable.

4.   Importers shall ensure that, while a high-risk AI system is under their responsibility, storage or transport conditions, where applicable, do not jeopardise its compliance with the requirements set out in Section 2.

5.   Importers shall keep, for a period of 10 years after the high-risk AI system has been placed on the market or put into service, a copy of the certificate issued by the notified body, where applicable, of the instructions for use, and of the EU declaration of conformity referred to in Article 47.

6.   Importers shall provide the relevant competent authorities, upon a reasoned request, with all the necessary information and documentation, including that referred to in paragraph 5, to demonstrate the conformity of a high-risk AI system with the requirements set out in Section 2 in a language which can be easily understood by them. For this purpose, they shall also ensure that the technical documentation can be made available to those authorities.

7.   Importers shall cooperate with the relevant competent authorities in any action those authorities take in relation to a high-risk AI system placed on the market by the importers, in particular to reduce and mitigate the risks posed by it.

1.   Providers of general-purpose AI models shall:

2.   The obligations set out in paragraph 1, points (a) and (b), shall not apply to providers of AI models that are released under a free and open-source licence that allows for the access, usage, modification, and distribution of the model, and whose parameters, including the weights, the information on the model architecture, and the information on model usage, are made publicly available. This exception shall not apply to general-purpose AI models with systemic risks.

3.   Providers of general-purpose AI models shall cooperate as necessary with the Commission and the national competent authorities in the exercise of their competences and powers pursuant to this Regulation.

4.   Providers of general-purpose AI models may rely on codes of practice within the meaning of Article 56 to demonstrate compliance with the obligations set out in paragraph 1 of this Article, until a harmonised standard is published. Compliance with European harmonised standards grants providers the presumption of conformity to the extent that those standards cover those obligations. Providers of general-purpose AI models who do not adhere to an approved code of practice or do not comply with a European harmonised standard shall demonstrate alternative adequate means of compliance for assessment by the Commission.

5.   For the purpose of facilitating compliance with Annex XI, in particular points 2 (d) and (e) thereof, the Commission is empowered to adopt delegated acts in accordance with Article 97 to detail measurement and calculation methodologies with a view to allowing for comparable and verifiable documentation.

6.   The Commission is empowered to adopt delegated acts in accordance with Article 97(2) to amend Annexes XI and XII in light of evolving technological developments.

7.   Any information or documentation obtained pursuant to this Article, including trade secrets, shall be treated in accordance with the confidentiality obligations set out in Article 78.

1.   When placing a product with digital elements on the market, manufacturers shall ensure that it has been designed, developed and produced in accordance with the essential cybersecurity requirements set out in Part I of Annex I.

2.   For the purpose of complying with paragraph 1, manufacturers shall undertake an assessment of the cybersecurity risks associated with a product with digital elements and take the outcome of that assessment into account during the planning, design, development, production, delivery and maintenance phases of the product with digital elements with a view to minimising cybersecurity risks, preventing incidents and minimising their impact, including in relation to the health and safety of users.

3.   The cybersecurity risk assessment shall be documented and updated as appropriate during a support period to be determined in accordance with paragraph 8 of this Article. That cybersecurity risk assessment shall comprise at least an analysis of cybersecurity risks based on the intended purpose and reasonably foreseeable use, as well as the conditions of use, of the product with digital elements, such as the operational environment or the assets to be protected, taking into account the length of time the product is expected to be in use. The cybersecurity risk assessment shall indicate whether and, if so in what manner, the security requirements set out in Part I, point (2), of Annex I are applicable to the relevant product with digital elements and how those requirements are implemented as informed by the cybersecurity risk assessment. It shall also indicate how the manufacturer is to apply Part I, point (1), of Annex I and the vulnerability handling requirements set out in Part II of Annex I.

4.   When placing a product with digital elements on the market, the manufacturer shall include the cybersecurity risk assessment referred to in paragraph 3 of this Article in the technical documentation required pursuant to Article 31 and Annex VII. For products with digital elements as referred to in Article 12, which are also subject to other Union legal acts, the cybersecurity risk assessment may be part of the risk assessment required by those Union legal acts. Where certain essential cybersecurity requirements are not applicable to the product with digital elements, the manufacturer shall include a clear justification to that effect in that technical documentation.

5.   For the purpose of complying with paragraph 1, manufacturers shall exercise due diligence when integrating components sourced from third parties so that those components do not compromise the cybersecurity of the product with digital elements, including when integrating components of free and open-source software that have not been made available on the market in the course of a commercial activity.

6.   Manufacturers shall, upon identifying a vulnerability in a component, including in an open source-component, which is integrated in the product with digital elements report the vulnerability to the person or entity manufacturing or maintaining the component, and address and remediate the vulnerability in accordance with the vulnerability handling requirements set out in Part II of Annex I. Where manufacturers have developed a software or hardware modification to address the vulnerability in that component, they shall share the relevant code or documentation with the person or entity manufacturing or maintaining the component, where appropriate in a machine-readable format.

7.   The manufacturers shall systematically document, in a manner that is proportionate to the nature and the cybersecurity risks, relevant cybersecurity aspects concerning the products with digital elements, including vulnerabilities of which they become aware and any relevant information provided by third parties, and shall, where applicable, update the cybersecurity risk assessment of the products.

8.   Manufacturers shall ensure, when placing a product with digital elements on the market, and for the support period, that vulnerabilities of that product, including its components, are handled effectively and in accordance with the essential cybersecurity requirements set out in Part II of Annex I.

Manufacturers shall determine the support period so that it reflects the length of time during which the product is expected to be in use, taking into account, in particular, reasonable user expectations, the nature of the product, including its intended purpose, as well as relevant Union law determining the lifetime of products with digital elements. When determining the support period, manufacturers may also take into account the support periods of products with digital elements offering a similar functionality placed on the market by other manufacturers, the availability of the operating environment, the support periods of integrated components that provide core functions and are sourced from third parties as well as relevant guidance provided by the dedicated administrative cooperation group (ADCO) established pursuant to Article 52(15) and the Commission. The matters to be taken into account in order to determine the support period shall be considered in a manner that ensures proportionality.

Without prejudice to the second subparagraph, the support period shall be at least five years. Where the product with digital elements is expected to be in use for less than five years, the support period shall correspond to the expected use time.

Taking into account ADCO recommendations as referred to in Article 52(16), the Commission may adopt delegated acts in accordance with Article 61 to supplement this Regulation by specifying the minimum support period for specific product categories where the market surveillance data suggests inadequate support periods.

Manufacturers shall include the information that was taken into account to determine the support period of a product with digital elements in the technical documentation as set out in Annex VII.

Manufacturers shall have appropriate policies and procedures, including coordinated vulnerability disclosure policies, referred to in Part II, point (5), of Annex I to process and remediate potential vulnerabilities in the product with digital elements reported from internal or external sources.

9.   Manufacturers shall ensure that each security update, as referred to in Part II, point (8), of Annex I, which has been made available to users during the support period, remains available after it has been issued for a minimum of 10 years or for the remainder of the support period, whichever is longer.

10.   Where a manufacturer has placed subsequent substantially modified versions of a software product on the market, that manufacturer may ensure compliance with the essential cybersecurity requirement set out in Part II, point (2), of Annex I only for the version that it has last placed on the market, provided that the users of the versions that were previously placed on the market have access to the version last placed on the market free of charge and do not incur additional costs to adjust the hardware and software environment in which they use the original version of that product.

11.   Manufacturers may maintain public software archives enhancing user access to historical versions. In those cases, users shall be clearly informed in an easily accessible manner about risks associated with using unsupported software.

12.   Before placing a product with digital elements on the market, manufacturers shall draw up the technical documentation referred to in Article 31.

They shall carry out the chosen conformity assessment procedures as referred to in Article 32 or have them carried out.

Where compliance of the product with digital elements with the essential cybersecurity requirements set out in Part I of Annex I and of the processes put in place by the manufacturer with the essential cybersecurity requirements set out in Part II of Annex I has been demonstrated by that conformity assessment procedure, manufacturers shall draw up the EU declaration of conformity in accordance with Article 28 and affix the CE marking in accordance with Article 30.

13.   Manufacturers shall keep the technical documentation and the EU declaration of conformity at the disposal of the market surveillance authorities for at least 10 years after the product with digital elements has been placed on the market or for the support period, whichever is longer.

14.   Manufacturers shall ensure that procedures are in place for products with digital elements that are part of a series of production to remain in conformity with this Regulation. Manufacturers shall adequately take into account changes in the development and production process or in the design or characteristics of the product with digital elements and changes in the harmonised standards, European cybersecurity certification schemes or common specifications as referred to in Article 27 by reference to which the conformity of the product with digital elements is declared or by application of which its conformity is verified.

15.   Manufacturers shall ensure that their products with digital elements bear a type, batch or serial number or other element allowing their identification, or, where that is not possible, that that information is provided on their packaging or in a document accompanying the product with digital elements.

16.   Manufacturers shall indicate the name, registered trade name or registered trademark of the manufacturer, and the postal address, email address or other digital contact details, as well as, where applicable, the website where the manufacturer can be contacted, on the product with digital elements, on its packaging or in a document accompanying the product with digital elements. That information shall also be included in the information and instructions to the user set out in Annex II. The contact details shall be in a language which can be easily understood by users and market surveillance authorities.

17.   For the purposes of this Regulation, manufacturers shall designate a single point of contact to enable users to communicate directly and rapidly with them, including in order to facilitate reporting on vulnerabilities of the product with digital elements.

Manufacturers shall ensure that the single point of contact is easily identifiable by the users. They shall also include the single point of contact in the information and instructions to the user set out in Annex II.

The single point of contact shall allow users to choose their preferred means of communication and shall not limit such means to automated tools.

18.   Manufacturers shall ensure that products with digital elements are accompanied by the information and instructions to the user set out in Annex II, in paper or electronic form. Such information and instructions shall be provided in a language which can be easily understood by users and market surveillance authorities. They shall be clear, understandable, intelligible and legible. They shall allow for the secure installation, operation and use of products with digital elements. Manufacturers shall keep the information and instructions to the user set out in Annex II at the disposal of users and market surveillance authorities for at least 10 years after the product with digital elements has been placed on the market or for the support period, whichever is longer. Where such information and instructions are provided online, manufacturers shall ensure that they are accessible, user-friendly and available online for at least 10 years after the product with digital elements has been placed on the market or for the support period, whichever is longer.

19.   Manufacturers shall ensure that the end date of the support period referred to in paragraph 8, including at least the month and the year, is clearly and understandably specified at the time of purchase in an easily accessible manner and, where applicable, on the product with digital elements, its packaging or by digital means.

Where technically feasible in light of the nature of the product with digital elements, manufacturers shall display a notification to users informing them that their product with digital elements has reached the end of its support period.

20.   Manufacturers shall either provide a copy of the EU declaration of conformity or a simplified EU declaration of conformity with the product with digital elements. Where a simplified EU declaration of conformity is provided, it shall contain the exact internet address at which the full EU declaration of conformity can be accessed.

21.   From the placing on the market and for the support period, manufacturers who know or have reason to believe that the product with digital elements or the processes put in place by the manufacturer are not in conformity with the essential cybersecurity requirements set out in Annex I shall immediately take the corrective measures necessary to bring that product with digital elements or the manufacturer’s processes into conformity, or to withdraw or recall the product, as appropriate.

22.   Manufacturers shall, upon a reasoned request from a market surveillance authority, provide that authority, in a language which can be easily understood by that authority, with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the product with digital elements and of the processes put in place by the manufacturer with the essential cybersecurity requirements set out in Annex I. Manufacturers shall cooperate with that authority, at its request, on any measures taken to eliminate the cybersecurity risks posed by the product with digital elements which they have placed on the market.

23.   A manufacturer that ceases its operations and, as a result, is not able to comply with this Regulation shall inform, before the cessation of operations takes effect, the relevant market surveillance authorities as well as, by any means available and to the extent possible, the users of the relevant products with digital elements placed on the market, of the impending cessation of operations.

24.   The Commission may, by means of implementing acts taking into account European or international standards and best practices, specify the format and elements of the software bill of materials referred to in Part II, point (1), of Annex I. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 62(2).

25.   In order to assess the dependence of Member States and of the Union as a whole on software components and in particular on components qualifying as free and open-source software, ADCO may decide to conduct a Union wide dependency assessment for specific categories of products with digital elements. For that purpose, market surveillance authorities may request manufacturers of such categories of products with digital elements to provide the relevant software bills of materials as referred to in Part II, point (1), of Annex I. On the basis of such information, the market surveillance authorities may provide ADCO with anonymised and aggregated information about software dependencies. ADCO shall submit a report on the results of the dependency assessment to the Cooperation Group established pursuant to Article 14 of Directive (EU) 2022/2555.

1.   Economic operators shall, on request, provide the market surveillance authorities with the following information:

2.   Economic operators shall be able to present the information referred to in paragraph 1 for 10 years after they have been supplied with the product with digital elements and for 10 years after they have supplied the product with digital elements.