|
+ANNEX V WASTE SUBJECT TO THE EXPORT PROHIBITION IN ARTICLE 36 |
ANNEX V WASTE SUBJECT TO THE EXPORT PROHIBITION IN ARTICLE 36
ANNEX V WASTE SUBJECT TO THE EXPORT PROHIBITION IN ARTICLE 36 Introductory notes 1. This Annex applies without prejudice to Directives 91/689/EEC and 2006/12/EC. 2. This Annex consists of three parts, Parts 2 and 3 of which apply only when Part 1 is not applicable. Consequently, to determine whether a specific waste is listed in this Annex, an initial check must be made to ascertain whether the waste is listed in Part 1 of this Annex, and, if it does not, whether it is listed in Part 2, and, if it does not, whether it is listed in Part 3. Part 1 is divided into two sub-sections: List A lists wastes which are classified as hazardous by Article 1(1)(a) of the Basel Convention, and therefore covered by the export prohibition, and List B lists wastes which are not covered by Article 1(1)(a) of the Basel Convention, and therefore not covered by the export prohibition. Thus, if a waste is listed in Part 1, a check must be made to ascertain whether it is listed in List A or in List B. Only if a waste is not listed in either List A or List B of Part 1, must a check be made to ascertain whether it is listed either among the hazardous waste listed in Part 2 (i.e. types of waste marked with an asterisk) or in Part 3, and if this is the case, it is covered by the export prohibition. 3. Wastes listed in List B of Part 1 or which are among the non-hazardous waste listed in Part 2 (i.e. wastes not marked with an asterisk) are covered by the export prohibition if they are contaminated by other materials to an extent which
(a)
increases the risks associated with the waste sufficiently to render it appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or
(b)
prevents the recovery of the waste in an environmentally sound manner. Part 1 ( 38 ) List A (Annex VIII to the Basel Convention) A1 METAL AND METAL BEARING WASTES A1010 Metal wastes and waste consisting of alloys of any of the following:
—
Antimony
—
Arsenic
—
Beryllium
—
Cadmium
—
Lead
—
Mercury
—
Selenium
—
Tellurium
—
Thallium
but excluding such wastes specifically listed on list B. A1020 Waste having as constituents or contaminants, excluding metal waste in massive form, any of the following:
—
Antimony; antimony compounds
—
Beryllium; beryllium compounds
—
Cadmium; cadmium compounds
—
Lead; lead compounds
—
Selenium; selenium compounds
—
Tellurium; tellurium compounds
A1030 Wastes having as constituents or contaminants any of the following:
—
Arsenic; arsenic compounds
—
Mercury; mercury compounds
—
Thallium; thallium compounds
A1040 Wastes having as constituents any of the following:
—
Metal carbonyls
—
Hexavalent chromium compounds
A1050 Galvanic sludges A1060 Waste liquors from the pickling of metals A1070 Leaching residues from zinc processing, dust and sludges such as jarosite, hematite, etc. A1080 Waste zinc residues not included on list B, containing lead and cadmium in concentrations sufficient to exhibit Annex III characteristics A1090 Ashes from the incineration of insulated copper wire A1100 Dusts and residues from gas cleaning systems of copper smelters A1110 Spent electrolytic solutions from copper electrorefining and electrowinning operations A1120 Waste sludges, excluding anode slimes, from electrolyte purification systems in copper electrorefining and electrowinning operations A1130 Spent etching solutions containing dissolved copper A1140 Waste cupric chloride and copper cyanide catalysts A1150 Precious metal ash from incineration of printed circuit boards not included on list B ( 39 ) A1160 Waste lead-acid batteries, whole or crushed A1170 Unsorted waste batteries excluding mixtures of only list B batteries. Waste batteries not specified on list B containing Annex I constituents to an extent to render them hazardous A1181 Electrical and electronic waste (note the related entry Y49 in List A of Part 3 in Annex V):
—
Waste electrical and electronic equipment
—
containing or contaminated with cadmium, lead, mercury, organohalogen compounds or other Annex I constituents to an extent that the waste exhibits an Annex III characteristic, or
—
with a component containing or contaminated with Annex I constituents to an extent that the component exhibits an Annex III characteristic, including but not limited to any of the following components:
—
glass from cathode-ray tubes included on list A
—
a battery included on list A
—
a switch, lamp, fluorescent tube or a display device backlight which contains mercury
—
a capacitor containing PCBs
—
a component containing asbestos
—
certain circuit boards
—
certain display devices
—
certain plastic components containing a brominated flame retardant
—
Waste components of electrical and electronic equipment containing or contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III characteristic, unless covered by another entry on list A
—
Wastes arising from the processing of waste electrical and electronic equipment or waste components of electrical and electronic equipment, and containing or contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic (e.g. fractions arising from shredding or dismantling), unless covered by another entry on list A
A1190 Waste metal cables coated or insulated with plastics containing or contaminated with coal tar, PCB ( 40 ), lead, cadmium, other organohalogen compounds or other Annex I constituents, to the extent that they exhibit Annex III characteristics A2 WASTES CONTAINING PRINCIPALLY INORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND ORGANIC MATERIALS A2010 Glass waste from cathode-ray tubes and other activated glasses A2020 Waste inorganic fluorine compounds in the form of liquids or sludges but excluding such wastes specified on list B A2030 Waste catalysts but excluding such wastes specified on list B A2040 Waste gypsum arising from chemical industry processes, when containing Annex I constituents to the extent that it exhibits an Annex III hazardous characteristic (note the related entry on list B, B2080) A2050 Waste asbestos (dusts and fibres) A2060 Coal-fired power plant fly-ash containing Annex I substances in concentrations sufficient to exhibit Annex III characteristics (note the related entry on list B, B2050) A3 WASTES CONTAINING PRINCIPALLY ORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND INORGANIC MATERIALS A3010 Waste from the production or processing of petroleum coke and bitumen A3020 Waste mineral oils unfit for their originally intended use A3030 Wastes that contain, consist of or are contaminated with leaded anti-knock compound sludges A3040 Waste thermal (heat transfer) fluids A3050 Wastes from production, formulation and use of resins, latex, plasticisers, glues/adhesives excluding such wastes specified on list B (note the related entry on list B, B4020) A3060 Waste nitrocellulose A3070 Waste phenols, phenol compounds including chlorophenol in the form of liquids or sludges A3080 Waste ethers not including those specified on list B A3090 Waste leather dust, ash, sludges and flours when containing hexavalent chromium compounds or biocides (note the related entry on list B, B3100) A3100 Waste paring and other waste of leather or of composition leather not suitable for the manufacture of leather articles containing hexavalent chromium compounds or biocides (note the related entry on list B, B3090) A3110 Fellmongery wastes containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list B, B3110) A3120 Fluff — light fraction from shredding A3130 Waste organic phosphorous compounds A3140 Waste non-halogenated organic solvents but excluding such wastes specified on list B A3150 Waste halogenated organic solvents A3160 Waste halogenated or unhalogenated non-aqueous distillation residues arising from organic solvent recovery operations A3170 Wastes arising from the production of aliphatic halogenated hydrocarbons (such as chloromethane, dichloro-ethane, vinyl chloride, vinylidene chloride, allyl chloride and epichlorhydrin) A3180 Wastes, substances and articles containing, consisting of or contaminated with polychlorinated biphenyl (PCB), polychlorinated terphenyl (PCT), polychlorinated naphthalene (PCN) or polybrominated biphenyl (PBB), or any other polybrominated analogues of these compounds, at a concentration level of 50 mg/kg or more ( 41 ) A3190 Waste tarry residues (excluding asphalt cements) arising from refining, distillation and any pyrolitic treatment of organic materials A3200 Bituminous material (asphalt waste) from road construction and maintenance, containing tar (note the related entry on list B B2130) A3210 Plastic waste, including mixtures of such waste, containing or contaminated with Annex I constituents, to an extent that it exhibits an Annex III characteristic (note the related entry B3011, in list B of this Part, and entry Y48, in list A of Part 3) A4 WASTES WHICH MAY CONTAIN EITHER INORGANIC OR ORGANIC CONSTITUENTS A4010 Wastes from the production, preparation and use of pharmaceutical products but excluding such wastes specified on list B A4020 Clinical and related wastes; that is wastes arising from medical, nursing, dental, veterinary, or similar practices, and wastes generated in hospitals or other facilities during the investigation or treatment of patients, or research projects A4030 Wastes from the production, formulation and use of biocides and phytopharmaceuticals, including waste pesticides and herbicides which are off-specification, out-dated ( 42 ), or unfit for their originally intended use A4040 Wastes from the manufacture, formulation and use of wood-preserving chemicals ( 43 ) A4050 Wastes that contain, consist of or are contaminated with any of the following:
—
Inorganic cyanides, excepting precious-metal-bearing residues in solid form containing traces of inorganic cyanides
—
Organic cyanides
A4060 Waste oils/water, hydrocarbons/water mixtures, emulsions A4070 Wastes from the production, formulation and use of inks, dyes, pigments, paints, lacquers, varnish excluding any such waste specified on list B (note the related entry on list B, B4010) A4080 Wastes of an explosive nature (but excluding such wastes specified on list B) A4090 Waste acidic or basic solutions, other than those specified in the corresponding entry on list B (note the related entry on list B, B2120) A4100 Wastes from industrial pollution control devices for cleaning of industrial off-gases but excluding such wastes specified on list B A4110 Wastes that contain, consist of or are contaminated with any of the following:
—
any congenor of polychlorinated dibenzo-furan
—
any congenor of polychlorinated dibenzo-p-dioxin
A4120 Wastes that contain, consist of or are contaminated with peroxides A4130 Waste packages and containers containing Annex I substances in concentrations sufficient to exhibit Annex III hazard characteristics A4140 Waste consisting of or containing off-specification or out-dated (42) chemicals corresponding to Annex I categories and exhibiting Annex III hazard characteristics A4150 Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on human health and/or the environment are not known A4160 Spent activated carbon not included on list B (note the related entry on list B, B2060) List B (Annex IX to the Basel Convention) B1 METAL AND METAL BEARING WASTES B1010 Metal and metal-alloy wastes in metallic, non-dispersible form:
—
Precious metals (gold, silver, the platinum group, but not mercury)
—
Iron and steel scrap
—
Copper scrap
—
Nickel scrap
—
Aluminium scrap
—
Zinc scrap
—
Tin scrap
—
Tungsten scrap
—
Molybdenum scrap
—
Tantalum scrap
—
Magnesium scrap
—
Cobalt scrap
—
Bismuth scrap
—
Titanium scrap
—
Zirconium scrap
—
Manganese scrap
—
Germanium scrap
—
Vanadium scrap
—
Scrap of Hafnium, Indium, Niobium, Rhenium and Gallium
—
Thorium scrap
—
Rare earths scrap
—
Chromium scrap
B1020 Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, plate, beams, rods, etc.):
—
Antimony scrap
—
Beryllium scrap
—
Cadmium scrap
—
Lead scrap (but excluding lead-acid batteries)
—
Selenium scrap
—
Tellurium scrap
B1030 Refractory metals containing residues B1031 Molybdenum, tungsten, titanium, tantalum, niobium and rhenium metal and metal alloy wastes in metallic dispersible form (metal powder), excluding such wastes as specified in list A under entry A1050, Galvanic sludges. B1040 Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous B1050 Mixed non-ferrous metal, heavy fraction scrap, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics ( 44 ) B1060 Waste Selenium and Tellurium in metallic elemental form including powder B1070 Waste of copper and copper alloys in dispersible form, unless they contain Annex I constituents to an extent that they exhibit Annex III characteristics B1080 Zinc ash and residues including zinc alloys residues in dispersible form unless containing Annex I constituents in concentration such as to exhibit Annex III characteristics ( 45 ) B1090 Waste batteries conforming to a specification, excluding those made with lead, cadmium or mercury B1100 Metal-bearing wastes arising from melting, smelting and refining of metals:
—
Hard zinc spelter
—
Zinc-containing drosses:
—
Galvanising slab zinc top dross (>90 % Zn)
—
Galvanising slab zinc bottom dross (>92 % Zn)
—
Zinc die casting dross (>85 % Zn)
—
Hot dip galvanisers slab zinc dross (batch) (>92 % Zn)
—
Zinc skimmings
—
Aluminium skimmings (or skims) excluding salt slag
—
Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex III hazard characteristics
—
Wastes of refractory linings, including crucibles, originating from copper smelting
—
Slags from precious metals processing for further refining
—
Tantalum bearing tin slags with less than 0,5 % tin
▼M15 ————— B1115 Waste metal cables coated or insulated with plastics, not included in list A1190, excluding those destined for Annex IVA operations or any other disposal operations involving, at any stage, uncontrolled thermal processes, such as open-burning B1120 Spent catalysts excluding liquids used as catalysts, containing any of:
B1130 Cleaned spent precious-metal-bearing catalysts B1140 Precious-metal-bearing residues in solid form which contain traces of inorganic cyanides B1150 Precious metals and alloy wastes (gold, silver, the platinum group, but not mercury) in a dispersible, non-liquid form with appropriate packaging and labelling B1160 Precious-metal ash from the incineration of printed circuit boards (note the related entry on list A, A1150) B1170 Precious-metal ash from the incineration of photographic film B1180 Waste photographic film containing silver halides and metallic silver B1190 Waste photographic paper containing silver halides and metallic silver B1200 Granulated slag arising from the manufacture of iron and steel B1210 Slag arising from the manufacture of iron and steel including slags as a source of TiO2 and Vanadium B1220 Slag from zinc production, chemically stabilised, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301) mainly for construction B1230 Mill scaling arising from the manufacture of iron and steel B1240 Copper oxide mill-scale B1250 Waste end-of-life motor vehicles, containing neither liquids nor other hazardous components B2 WASTES CONTAINING PRINCIPALLY INORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND ORGANIC MATERIALS B2010 Wastes from mining operations in non-dispersible form:
—
Natural graphite waste
—
Slate waste, whether or not roughly trimmed or merely cut, by sawing or otherwise
—
Mica waste
—
Leucite, nepheline and nepheline syenite waste
—
Feldspar waste
—
Fluorspar waste
—
Silica wastes in solid form excluding those used in foundry operations
B2020 Glass waste in non-dispersible form:
—
Cullet and other waste and scrap of glass except for glass from cathode-ray tubes and other activated glasses
B2030 Ceramic wastes in non-dispersible form:
—
Cermet wastes and scrap (metal ceramic composites)
—
Ceramic based fibres not elsewhere specified or included
B2040 Other wastes containing principally inorganic constituents:
—
Partially refined calcium sulphate produced from flue-gas desulphurisation (FGD)
—
Waste gypsum wallboard or plasterboard arising from the demolition of buildings
—
Slag from copper production, chemically stabilised, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301 and DIN 8201) mainly for construction and abrasive applications
—
Sulphur in solid form
—
Limestone from the production of calcium cyanamide (having a pH less than 9)
—
Sodium, potassium, calcium chlorides
—
Carborundum (silicon carbide)
—
Broken concrete
—
Lithium-Tantalum and Lithium-Niobium containing glass scraps
B2050 Coal-fired power plant fly-ash, not included on list A (note the related entry on list A, A2060) B2060 Spent activated carbon ►C4 not containing any Annex I constituents to the extent that they exhibit ◄ Annex III characteristics, for example, carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry on list A A4160) B2070 Calcium fluoride sludge B2080 Waste gypsum arising from chemical industry processes not included on list A (note the related entry on list A, A2040) B2090 Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry) B2100 Waste hydrates of aluminium and waste alumina and residues from alumina production excluding such materials used for gas cleaning, flocculation or filtration processes B2110 Bauxite residue (red mud) (pH moderated to less than 11,5 ) B2120 Waste acidic or basic solutions with a pH greater than 2 and less than 11,5 , which are not corrosive or otherwise hazardous (note the related entry on list A, A4090) B2130 Bituminous material (asphalt waste) from road construction and maintenance, not containing tar ( 46 )(note the related entry on list A A3200) B3 WASTES CONTAINING PRINCIPALLY ORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND INORGANIC MATERIALS ▼M14 ————— B3011 Plastic waste (note the related entry A3210, in list A of this Part, and entry Y48, in list A of Part 3)
—
Plastic waste listed below, provided it is destined for recycling (
47
) in an environmentally sound manner and almost free from contamination and other types of wastes (
48
):
—
Plastic waste almost exclusively (
49
) consisting of one non-halogenated polymer, including but not limited to the following polymers:
—
Polyethylene (PE)
—
Polypropylene (PP)
—
Polystyrene (PS)
—
Acrylonitrile butadiene styrene (ABS)
—
Polyethylene terephthalate (PET)
—
Polycarbonates (PC)
—
Polyethers
—
Plastic waste almost exclusively (49) consisting of one cured resin or condensation product, including but not limited to the following resins:
—
Urea formaldehyde resins
—
Phenol formaldehyde resins
—
Melamine formaldehyde resins
—
Epoxy resins
—
Alkyd resins
—
Plastic waste almost exclusively (49) consisting of one of the following fluorinated polymers: (
50
)
—
Perfluoroethylene/propylene (FEP)
—
Perfluoroalkoxy alkanes:
—
Tetrafluoroethylene/perfluoroalkyl vinyl ether (PFA)
—
Tetrafluoroethylene/perfluoromethyl vinyl ether (MFA)
—
Polyvinylfluoride (PVF)
—
Polyvinylidenefluoride (PVDF)
—
Mixtures of plastic waste, consisting of polyethylene (PE), polypropylene (PP) and/or polyethylene terephthalate (PET), provided they are destined for separate recycling (
51
) of each material and in an environmentally sound manner, and almost free from contamination and other types of wastes (48) .
B3020 Paper, paperboard and paper product wastes The following materials, provided they are not mixed with hazardous wastes: Waste and scrap of paper or paperboard of:
—
unbleached paper or paperboard or of corrugated paper or paperboard
—
other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass
—
paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter)
—
other, including but not limited to
1.
laminated paperboard;
2.
unsorted scrap B3026 The following waste from the pre-treatment of composite packaging for liquids, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics:
—
Non-separable plastic fraction
—
Non-separable plastic-aluminium fraction
B3027 Self-adhesive label laminate waste containing raw materials used in label material production B3030 Textile wastes The following materials, provided they are not mixed with other wastes and are prepared to a specification:
—
Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock)
—
not carded or combed
—
other
—
Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock
—
noils of wool or of fine animal hair
—
other waste of wool or of fine animal hair
—
waste of coarse animal hair
—
Cotton waste (including yarn waste and garnetted stock)
—
yarn waste (including thread waste)
—
garnetted stock
—
other
—
Flax tow and waste
—
Tow and waste (including yarn waste and garnetted stock) of true hemp (Cannabis sativa L.)
—
Tow and waste (including yarn waste and garnetted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie)
—
Tow and waste (including yarn waste and garnetted stock) of sisal and other textile fibres of the genus Agave
—
Tow, noils and waste (including yarn waste and garnetted stock) of coconut
—
Tow, noils and waste (including yarn waste and garnetted stock) of abaca (Manila hemp or Musa textilis Nee)
—
Tow, noils and waste (including yarn waste and garnetted stock) of ramie and other vegetable textile fibres, not elsewhere specified or included
—
Waste (including noils, yarn waste and garnetted stock) of man-made fibres
—
of synthetic fibres
—
of artificial fibres
—
Worn clothing and other worn textile articles
—
Used rags, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile
—
sorted
—
other
B3035 Waste textile floor coverings, carpets B3040 Rubber wastes The following materials, provided they are not mixed with other wastes:
—
Waste and scrap of hard rubber (e.g. ebonite)
—
Other rubber wastes (excluding such wastes specified elsewhere)
B3050 Untreated cork and wood waste:
—
Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
—
Cork waste: crushed, granulated or ground cork
B3060 Wastes arising from agro-food industries provided it is not infectious:
—
Wine lees
—
Dried and sterilised vegetable waste, residues and byproducts, whether or not in the form of pellets, or a kind used in animal feeding, not elsewhere specified or included
—
►C4
Degras; residues resulting ◄ from the treatment of fatty substances or animal or vegetable waxes
—
Waste of bones and horn-cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised
—
Fish waste
—
Cocoa shells, husks, skins and other cocoa waste
—
Other wastes from the agro-food industry excluding by-products which meet national and international requirements and standards for human or animal consumption
B3065 Waste edible fats and oils of animal or vegetable origin (e.g. frying oils), provided they do not exhibit an Annex III characteristic B3070 The following wastes:
—
Waste of human hair
—
Waste straw
—
Deactivated fungus mycelium from penicillin production to be used as animal feed
B3080 Waste parings and scrap of rubber B3090 Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry on list A, A3100) B3100 Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides (note the related entry on list A, A3090) B3110 Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list A, A3110) B3120 Wastes consisting of food dyes B3130 Waste polymer ethers and waste non-hazardous monomer ethers incapable of forming peroxides B3140 Waste pneumatic tyres, excluding those destined for Annex IVA operations B4 WASTES WHICH MAY CONTAIN EITHER INORGANIC OR ORGANIC CONSTITUENTS B4010 Wastes consisting mainly of water-based/latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry on list A, A4070) B4020 Wastes from production, formulation and use of resins, latex, plasticisers, glues/adhesives, not listed on list A, free of solvents and other contaminants to an extent that they do not exhibit Annex III characteristics, ►C4 e.g. water-based, or glues based on casein, starch, dextrin, cellulose ethers, ◄ polyvinyl alcohols (note the related entry on list A, A3050) ▼M15 —————
Part 2 Wastes listed in the Annex to Decision 2000/532/EC (1)
Part 3 List A (Annex II to the Basel Convention)
Y46
Waste collected from households ( 52 )
Y47
Residues arising from the incineration of household wastes
Y48
Plastic waste, including mixtures of such waste, with the exception of the following:
—
Plastic waste that is hazardous waste (see entry A3210 in part 1 of list A in Annex V)
—
Plastic waste listed below, provided it is destined for recycling (
53
) in an environmentally sound manner and almost free from contamination and other types of wastes: (
54
)
—
Plastic waste almost exclusively (
55
) consisting of one non-halogenated polymer, including but not limited to the following polymers:
—
Polyethylene (PE)
—
Polypropylene (PP)
—
Polystyrene (PS)
—
Acrylonitrile butadiene styrene (ABS)
—
Polyethylene terephthalate (PET)
—
Polycarbonates (PC)
—
Polyethers
—
Plastic waste almost exclusively (55) consisting of one cured resin or condensation product, including but not limited to the following resins:
—
Urea formaldehyde resins
—
Phenol formaldehyde resins
—
Melamine formaldehyde resins
—
Epoxy resins
—
Alkyd resins
—
Plastic waste almost exclusively (55) consisting of one of the following fluorinated polymers: (
56
)
—
Perfluoroethylene/propylene (FEP)
—
Perfluoroalkoxy alkanes:
—
Tetrafluoroethylene/perfluoroalkyl vinyl ether (PFA)
—
Tetrafluoroethylene/perfluoromethyl vinyl ether (MFA)
—
Polyvinylfluoride (PVF)
—
Polyvinylidenefluoride (PVDF)
—
Mixtures of plastic waste, consisting of polyethylene (PE), polypropylene (PP) and/or polyethylene terephthalate (PET), provided they are destined for separate recycling (
57
) of each material and in an environmentally sound manner and almost free from contamination and other types of wastes. (
58
)
Y49
Electrical and electronic waste:
—
Waste electrical and electronic equipment
—
not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, and
—
in which none of the components (e.g. certain circuit boards, certain display devices) contain or are contaminated with Annex I constituents to an extent that the component exhibits an Annex III characteristic
—
Waste components of electrical and electronic equipment (e.g. certain circuit boards, certain display devices) not containing and not contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX
—
Wastes arising from the processing of waste electrical and electronic equipment or waste components of electrical and electronic equipment (e.g. fractions arising from shredding or dismantling), and not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX
List B (Waste from Appendix 4, Part II of the OECD Decision) ( 59 ) Metal bearing wastes
Wastes containing principally inorganic constituents, which may contain metals and organic materials
Wastes containing principally organic constituents, which may contain metals and inorganic materials
Wastes which may contain either inorganic or organic constituents
Wastes containing principally inorganic constituents, which may contain metals and organic materials
1. Yleiskatsaus
1.1 Viittaukset1.2 Tunnistetut vaatimukset1.3 Liittyvät standardit2. Tunnistetut vaatimukset
3. Liittyvät standardit
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||