+ANNEX VIII Inventories, reports and mitigations plans for closed underground coal mines and abandoned underground coal mines as referred to in Articles 24, 25 and 26
---+1. For each site, the inventory of closed underground coal mines and abandoned underground coal …
---+2. The measurements referred to in point 1.5 shall be taken in accordance with the following …
---+1. name and address of the operator, owner or licensee, as applicable;
---+2. address of the site;
---+3. methane emissions from all point emission sources outlined in Part 1, including: (a) type of …
---+1. The mitigation plan referred to in Article 26(1) shall include at least the following elements …
---+2. The mitigation plan may include an overview of the mitigation practices used to reduce methane …
|
ANNEX VIII Inventories, reports and mitigations plans for closed underground coal mines and abandoned underground coal mines as referred to in Articles 24, 25 and 26
ANNEX VIII Inventories, reports and mitigations plans for closed underground coal mines and abandoned underground coal mines as referred to in Articles 24, 25 and 26
1. Vue d’ensemble
| Intitulé |
Réglementation |
|
1. For each site, the inventory of closed underground coal mines and abandoned underground coal …
|
|
1.
|
For each site, the inventory of closed underground coal mines and abandoned underground coal mines referred to in Articles 24 and 25 shall include at least the following elements:
|
1.1.
|
name and address of the operator, owner or licensee, as applicable;
|
|
1.2.
|
address of the site;
|
|
1.3.
|
map showing the borders of the coal mine;
|
|
1.4.
|
schemes of the coal mine workings and their status;
|
|
1.5.
|
results of source-level direct methane measurement or quantification at the following point emission sources:
|
(a)
|
all shafts used by the coal mine when active, accompanied by:
|
(ii)
|
shaft name (if any);
|
|
(iii)
|
sealing status and sealing method, if known;
|
|
|
(c)
|
unused gas drainage wells;
|
|
(d)
|
other recorded potential point emission sources.
|
|
|
|
|
2. The measurements referred to in point 1.5 shall be taken in accordance with the following …
|
|
2.
|
The measurements referred to in point 1.5 shall be taken in accordance with the following principles:
|
2.1.
|
measurements shall be taken at atmospheric pressure allowing for potential methane leaks to be detected, and in accordance with the appropriate scientific standards;
|
|
2.2.
|
measurements shall be taken using equipment with an accuracy of at least 0,5 tonnes per year;
|
|
2.3.
|
measurements shall be accompanied by information on:
|
(a)
|
date of the measurement;
|
|
(b)
|
atmospheric pressure;
|
|
(c)
|
technical details of the equipment used for the measurement;
|
|
|
2.4.
|
ventilation shafts historically used by two or more coal mines shall be assigned to just one coal mine in order to avoid double-counting.
|
|
Part 2 The report referred to in Article 25(6) shall include the following elements:
|
|
1. name and address of the operator, owner or licensee, as applicable;
|
|
1.
|
name and address of the operator, owner or licensee, as applicable;
|
|
|
2. address of the site;
|
|
|
3. methane emissions from all point emission sources outlined in Part 1, including: (a) type of …
|
|
3.
|
methane emissions from all point emission sources outlined in Part 1, including:
|
(a)
|
type of point emission source;
|
|
(b)
|
technical details of the measurement equipment and method used to estimate methane emissions, including sensitivity;
|
|
(c)
|
proportion of time when the measurement equipment was operating;
|
|
(d)
|
methane concentration registered by the measurement equipment;
|
|
(e)
|
estimates of methane emissions from the point emission source.
|
|
Part 3
|
|
1. The mitigation plan referred to in Article 26(1) shall include at least the following elements …
|
|
1.
|
The mitigation plan referred to in Article 26(1) shall include at least the following elements:
|
1.1.
|
a list of all point emission sources referred to in Part 1;
|
|
1.2.
|
technical feasibility of mitigation of methane emissions at site level, based on point emission sources;
|
|
1.3.
|
timeline of mitigation of methane emissions from each site;
|
|
1.4.
|
assessment of the efficiency of projects for collection of methane from an abandoned coal mine, where implemented.
|
|
|
|
2. The mitigation plan may include an overview of the mitigation practices used to reduce methane …
|
|
2.
|
The mitigation plan may include an overview of the mitigation practices used to reduce methane emissions, such as the development of geothermal and heat storage projects in flooded coal mines, hydropower applications in non-flooded coal mines, capturing methane by degassing, use of safety-relevant degassing devices, use of mine gas as an energy resource or impoundment of mine water and other possible uses.
|
|
,
1.1 Références
1.2 Exigences identifiées
1.3 Normes associées
2. Exigences identifiées
Exigences
| Source |
Exigence |
3. Normes associées
|