+Article 25 Tests des plans de continuité des activités de TIC
---+Article 25 1.
---+Article 25 2.
---+Article 25 3.
---+Article 25 4.
---+Article 25 5.
|
Article 25 Tests des plans de continuité des activités de TIC
-
1. Vue d’ensemble
| Intitulé |
Réglementation |
|
Article 25 1.
|
Lorsqu’elles testent les plans de continuité des activités de TIC conformément à l’article 11, paragraphe 6, du règlement (UE) 2022/2554, les entités financières tiennent compte de l’analyse des incidences sur les activités de l’entité financière et de l’évaluation du risque lié aux TIC visée à l’article 3, premier alinéa, point b), du présent règlement.
|
|
Article 25 2.
|
Les entités financières évaluent, au moyen des tests de leurs plans de continuité des activités de TIC visés au paragraphe 1, si elles sont en mesure d’assurer la continuité de leurs fonctions critiques ou importantes. Ces tests:
a)
sont réalisés sur la base de scénarios de test simulant des perturbations potentielles, y compris un ensemble adéquat de scénarios graves mais plausibles;
b)
comprennent, le cas échéant, des tests des services TIC fournis par des prestataires tiers de services TIC;
c)
pour les entités financières, autres que les microentreprises, visées à l’article 11, paragraphe 6, deuxième alinéa, du règlement (UE) 2022/2554, comprennent des scénarios de basculement entre l’infrastructure de TIC principale et la capacité redondante, les sauvegardes et les installations redondantes;
d)
sont conçus pour éprouver les hypothèses sur lesquelles se fondent les plans de continuité des activités, y compris les dispositifs de gouvernance et les plans de communication en situation de crise;
e)
comportent des procédures visant à vérifier la capacité du personnel des entités financières, des prestataires tiers de services TIC, des systèmes de TIC et des services TIC à répondre de manière adéquate aux scénarios dûment pris en considération conformément à l’article 26, paragraphe 2.
Aux fins du point a), les entités financières incluent toujours dans les tests les scénarios envisagés pour l’élaboration des plans de continuité des activités. Aux fins du point b), les entités financières tiennent dûment compte des scénarios liés à l’insolvabilité ou aux défaillances des prestataires tiers de services TIC ou aux risques politiques dans les juridictions des prestataires tiers de services TIC, le cas échéant. Aux fins du point c), les tests permettent de vérifier si au moins les fonctions critiques ou importantes peuvent être exercées de manière appropriée pendant une durée suffisante et si le fonctionnement normal peut être rétabli.
|
|
Article 25 3.
|
En plus de respecter les exigences prévues au paragraphe 2, les contreparties centrales associent aux tests de leurs plans de continuité des activités de TIC visés au paragraphe 1:
a)
les membres compensateurs;
b)
les prestataires externes;
c)
les établissements de l’infrastructure financière avec lesquels les contreparties centrales ont constaté des interdépendances dans le cadre de leur politique de continuité des activités.
|
|
Article 25 4.
|
En plus de respecter les exigences prévues au paragraphe 2, les dépositaires centraux de titres associent, le cas échéant, aux tests de leurs plans de continuité des activités de TIC visés au paragraphe 1:
a)
les utilisateurs des dépositaires centraux de titres;
b)
les prestataires de services et fournisseurs de services de réseau essentiels;
c)
d’autres dépositaires centraux de titres;
d)
d’autres infrastructures de marché;
e)
d’autres établissements avec lesquels les dépositaires centraux de titres ont constaté des interdépendances dans le cadre de leur politique de continuité des activités.
|
|
Article 25 5.
|
Les entités financières documentent les résultats des tests visés au paragraphe 1. Toute défaillance constatée à la suite de ces tests est analysée, traitée et notifiée à l’organe de direction.
|
,
1.1 Références
1.2 Exigences identifiées
1.3 Normes associées
2. Exigences identifiées
Exigences
| Source |
Exigence |
3. Normes associées
Normes
| Source |
Exigence |
|
SCF
|
Status Reporting To Governing Body
Description
Mechanisms exist to provide governance oversight reporting and recommendations enabling executives to make decisions about matters considered material to the organization's Security, Compliance & Resilience Program (SCRP).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Quarterly Business Review (QBR)
∙ Simple security status dashboard (spreadsheet or slide deck)
∙ Email status updates to owner/manager
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Quarterly Business Review (QBR)
∙ Structured security metrics report (incidents, patching status, training completion)
∙ Documented reporting cadence
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Quarterly Business Review (QBR)
∙ Formal security status reports to leadership
∙ KPI/KRI dashboard (e.g., Power BI, Tableau, or GRC tool reporting)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Quarterly Business Review (QBR)
∙ Executive security dashboard with KPIs/KRIs
∙ Board-level reporting on material risk indicators
∙ Automated reporting via GRC platform
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Quarterly Business Review (QBR)
∙ Board and audit committee cybersecurity briefings
∙ Integrated GRC dashboard with real-time metrics
∙ SEC cybersecurity disclosure-ready reporting processes (if applicable)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Cybersecurity & Data Protection Governance (GOV) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with GOV domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with GOV domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with GOV domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Governance-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ No formal Governance, Risk & Compliance (GRC) team exists. GRC roles are assigned to existing IT and/or cybersecurity personnel.
▪ Organizational leadership maintains an informal process to review and respond to trends.
Level 3 Well Defined
Cybersecurity & Data Protection Governance (GOV) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with GOV domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with GOV domain capabilities are well-documented and kept current by process owners.
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain GOV domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ An implemented and operational capability exists to provide governance oversight reporting and recommendations to those entrusted to make executive decisions about matters considered material to the organization's Security, Compliance & Resilience Program (SCRP).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Training
Description
Mechanisms exist to adequately train contingency personnel and applicable stakeholders in their contingency roles and responsibilities.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ NIST NICE Framework
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ NIST NICE Framework
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ NIST NICE Framework
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ NIST NICE Framework
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ NIST NICE Framework
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to adequately train contingency personnel and applicable stakeholders in their contingency roles and responsibilities.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Coordinated Testing with Related Plans
Description
Mechanisms exist to coordinate contingency plan testing with internal and external parties responsible for related plans.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
∙ Red Team testing
∙ Penetration testing
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Red Team testing
∙ Penetration testing
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Red Team testing
∙ Penetration testing
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to coordinate contingency plan testing with internal and external elements responsible for related plans.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing For Alternate Storage & Processing Sites
Description
Mechanisms exist to test contingency plans at alternate storage & processing sites to both familiarize contingency personnel with the facility and evaluate the capabilities of the alternate processing site to support contingency operations.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Failover testing
∙ On-site visit to alternate site(s)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Failover testing
∙ On-site visit to alternate site(s)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Failover testing
∙ On-site visit to alternate site(s)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Failover testing
∙ On-site visit to alternate site(s)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Failover testing
∙ On-site visit to alternate site(s)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ A dedicated alternate site(s) is/are equipped to be compatible with the production network's processing, storage, connectivity and other infrastructure needs.
▪ Alternate sites are given priority of service to meet applicable RTOs and/or RPOs.
▪ RTOs are used to identify business-critical TAASD, which are given priority of service in alternate processing and storage sites.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to test contingency plans at alternate storage & processing sites to both familiarize contingency personnel with the facility and evaluate the capabilities of the alternate processing site to support contingency operations.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Root Cause Analysis (RCA) & Lessons Learned
Description
Mechanisms exist to conduct a Root Cause Analysis (RCA) and "lessons learned" activity every time the contingency plan is activated.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Root Cause Analysis (RCA) (After Action Review (AAR), lessons learned, etc.)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct a Root Cause Analysis (RCA) and "lessons learned" activity every time the contingency plan is activated.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Test Restoration Using Sampling
Description
Mechanisms exist to utilize sampling of available data backups to test recovery capabilities as part of business continuity plan testing.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Randomized data recovery testing
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Randomized data recovery testing
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Randomized data recovery testing
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Randomized data recovery testing
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Randomized data recovery testing
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel perform a random sampling of backups is tested at least semi-annually to verify integrity and recoverability of backed up data.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to utilize sampling of available backups to test recovery capabilities as part of business continuity plan testing.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Impact Analysis (BIA)
Description
Mechanisms exist to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Risk Management (RSK) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Risk management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Risk management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Risk management processes (e.g., risk assessments) and technologies focus on protecting High Value Assets (HVAs), including environments where sensitive/regulated data is stored, transmitted and processed.
▪ IT and/or cybersecurity personnel implement and maintain a form of Risk Management Program (RMP) that provides operational guidance on how risk is identified, assessed, remediated and reported.
▪ Data/process owners are expected to self-manage risks associated with their systems, applications, services and data, based on the organization's published policies and standards, including the identification, remediation and reporting of risks.
▪ Business process owners (BPOs) are made aware of cybersecurity and data protection risk(s).
Level 3 Well Defined
Risk Management (RSK) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are well-documented and kept current by process owners.
▪ A risk management team, or similar function, is appropriately staffed and supported to implement and maintain RSK domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of risk management operations (e.g., risk management solution, GRC platform and TPRM tool).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks.
Level 4 Quantitatively Controlled
Risk Management (RSK) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Third-Party Incident Response & Recovery Capabilities
Description
Mechanisms exist to ensure response/recovery planning and testing are conducted with critical suppliers/providers.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Third-party contract requirements for cybersecurity controls
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Third-party contract requirements for cybersecurity controls
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Third-party contract requirements for cybersecurity controls
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Third-party contract requirements for cybersecurity controls
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Third-party contract requirements for cybersecurity controls
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure response/recovery planning and testing are conducted with critical suppliers/providers.
Level 4 Quantitatively Controlled
Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|