+B.2 Cloning Authentication Keys

B.2 Cloning Authentication Keys

In some cases, authentication keys may be stored in a sync fabric (e.g., cloud storage). This allows the keys to be backed up and transferred to other devices. The following requirements apply to keys that are managed in this manner:

All keys SHALL be generated using approved cryptography.
Authentication keys that are cloned or exported from a device to a sync fabric SHALL only be stored in an encrypted form using a key with the minimum security strength specified in the latest revision of [SP800-131A] (i.e., 112 bits as of the date of this publication). These keys SHOULD be encrypted using a method that employs a user-controlled secret.
All authentication transactions SHALL perform private-key operations on the local device using cryptographic keys that are generated on-device or recovered from the sync fabric.
Authentication keys stored in the sync fabric SHALL be protected by access control mechanisms such that only the authenticated user can access their authentication keys in the sync fabric.
User access to authentication keys in the sync fabric SHALL be protected by AAL2-equivalent MFA to preserve the integrity of the authentication protocols using the synced keys.
These general requirements and any other agency-specific requirements for using syncable authenticators SHALL be documented and communicated, including on public-facing websites and digital service policies, where applicable.
Authenticators that enable the use of syncable authentication keys SHOULD provide a user interface (UI) that allows subscribers to view the services for which they have created a syncable authentication key, whether that key has been synced, and where that key has been synced. The UI SHALL NOT expose the authentication key itself.

The following additional requirements apply to federal enterprise1 use of syncable authenticators:

Federal enterprise authentication keys SHALL be stored in sync fabrics that have achieved Federal Information Security Modernization Act (FISMA) [FISMA] moderate protections or equivalent.
Devices (e.g., mobile phones, laptops, tablets) that generate, store, and sync authenticators containing federal enterprise authentication keys SHALL be protected by mobile device management software or other device configuration controls that prevent the syncing or sharing of keys to unauthorized devices or sync fabrics.
Access to the sync fabric SHALL be controlled by agency-managed accounts (e.g., a central identity and access management solution, platform-based managed account) to maintain federal enterprise control over the authentication key’s life cycle.
Authenticators that generate authentication keys SHOULD support attestation features that can be used to verify the capabilities and sources of the authenticator (e.g., enterprise attestation).

These controls specifically support syncing and should be considered additive to the existing multi-factor cryptographic authenticator requirements and AAL2 requirements, including [FIPS140] validation.

Syncing authentication keys inherently means that the key can be exported. Authentication at AAL2 may be supported subject to the above requirements. However, syncing violates the non-exportability requirements of AAL3. Similar protocols using keys not stored in an exportable manner that meet the other requirements of AAL3 may be used.

1. Forbhreathnú

1.1 Tagairtí

1.2 Ceanglais aitheanta

1.3 Rialacháin ghaolmhara

2. Ceanglais aitheanta

Ceanglais

3. Rialacháin ghaolmhara

Rialacháin
  • NIST -

    EN: Publications of the National Institute of Standards and Technology (NIST), U.S. Department of Commerce, https://www.nist.gov/, from their electronic versions (OSCAL; SP 800-63-4 from its HTML version, https://pages.nist.gov/800-63-4/). Works of NIST employees are not subject to copyright protection in the United States (17 U.S.C. § 105); the OSCAL content is dedicated to the public domain worldwide (CC0 1.0); outside the United States NIST grants the right to reprint its technical series publications in all formats (NIST copyright statement). Republished courtesy of the National Institute of Standards and Technology; each document names its citation. Divided into sections and converted into the GRCA format, the wording unchanged. Only the versions published by NIST are authoritative.

    DE: Veröffentlichungen des National Institute of Standards and Technology (NIST), U.S. Department of Commerce, https://www.nist.gov/, aus ihren elektronischen Fassungen (OSCAL; SP 800-63-4 aus ihrer HTML-Fassung, https://pages.nist.gov/800-63-4/). Werke von NIST-Beschäftigten sind in den USA urheberrechtlich nicht geschützt (17 U.S.C. § 105); die OSCAL-Inhalte sind weltweit gemeinfrei gestellt (CC0 1.0); außerhalb der USA räumt das NIST das Recht ein, seine Technical-Series-Publikationen in allen Formaten neu zu veröffentlichen (Copyright-Hinweis des NIST). „Republished courtesy of the National Institute of Standards and Technology“; jedes Dokument nennt seine Zitierangabe. In Abschnitte aufgeteilt und in das GRCA-Format umgewandelt, der Wortlaut unverändert. Maßgeblich sind allein die vom NIST veröffentlichten Fassungen.