+Articolo 47 Dichiarazione di conformità UE
---+Articolo 47 1.
---+Articolo 47 2.
---+Articolo 47 3.
---+Articolo 47 4.
---+Articolo 47 5.
|
Articolo 47 Dichiarazione di conformità UE
-
1. Panoramica
| Titolo |
Regolamentazione |
|
Articolo 47 1.
|
Il fornitore compila una dichiarazione scritta di conformità UE leggibile meccanicamente, firmata a mano o elettronicamente, per ciascun sistema di IA ad alto rischio e la tiene a disposizione delle autorità nazionali competenti per dieci anni dalla data in cui il sistema di IA ad alto rischio è stato immesso sul mercato o messo in servizio. La dichiarazione di conformità UE identifica il sistema di IA ad alto rischio per il quale è stata redatta. Su richiesta, una copia della dichiarazione di conformità UE è presentata alle pertinenti autorità nazionali competenti.
|
|
Articolo 47 2.
|
La dichiarazione di conformità UE attesta che il sistema di IA ad alto rischio interessato soddisfa i requisiti di cui alla sezione 2. La dichiarazione di conformità UE riporta le informazioni di cui all'allegato V ed è tradotta in una lingua che può essere facilmente compresa dalle autorità nazionali competenti degli Stati membri nei quali il sistema di IA ad alto rischio è immesso sul mercato o messo a disposizione.
|
|
Articolo 47 3.
|
Qualora i sistemi di IA ad alto rischio siano soggetti ad altra normativa di armonizzazione dell'Unione che richieda anch'essa una dichiarazione di conformità UE, è redatta un'unica dichiarazione di conformità UE in relazione a tutte le normative dell'Unione applicabili al sistema di IA ad alto rischio. La dichiarazione contiene tutte le informazioni necessarie per identificare la normativa di armonizzazione dell'Unione cui si riferisce la dichiarazione.
|
|
Articolo 47 4.
|
Redigendo la dichiarazione di conformità UE, il fornitore si assume la responsabilità della conformità ai requisiti di cui alla sezione 2. Il fornitore tiene opportunamente aggiornata la dichiarazione di conformità UE.
|
|
Articolo 47 5.
|
Alla Commissione è conferito il potere di adottare atti delegati conformemente all'articolo 97 al fine di modificare l’allegato V aggiornando il contenuto della dichiarazione di conformità UE di cui a tale allegato per introdurre elementi che si rendano necessari alla luce del progresso tecnico.
|
,
1.1 Riferimenti
1.2 Requisiti identificati
1.3 Standard correlati
2. Requisiti identificati
Requisiti
| Fonte |
Requisito |
3. Standard correlati
Standard
| Fonte |
Requisito |
|
SCF
|
Declaration of Conformity
Description
Mechanisms exist to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Document applicable regulatory requirements in a checklist
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Compliance checklist
∙ Annual compliance review
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.
▪ A formal report is generated for each security assessment/audit with sufficient details to understand the organization's ability to demonstrate conformity with its requirements.
Level 3 Well Defined
Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Declaration of Conformity
Description
Mechanisms exist to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Document applicable regulatory requirements in a checklist
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Compliance checklist
∙ Annual compliance review
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.
▪ A formal report is generated for each security assessment/audit with sufficient details to understand the organization's ability to demonstrate conformity with its requirements.
Level 3 Well Defined
Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Declaration of Conformity
Description
Mechanisms exist to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Document applicable regulatory requirements in a checklist
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Compliance checklist
∙ Annual compliance review
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.
▪ A formal report is generated for each security assessment/audit with sufficient details to understand the organization's ability to demonstrate conformity with its requirements.
Level 3 Well Defined
Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Declaration of Conformity
Description
Mechanisms exist to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Document applicable regulatory requirements in a checklist
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Compliance checklist
∙ Annual compliance review
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.
▪ A formal report is generated for each security assessment/audit with sufficient details to understand the organization's ability to demonstrate conformity with its requirements.
Level 3 Well Defined
Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to generate a declaration of conformity for each conformity assessment, where the document:
(1) Is concise;
(2) Unambiguously reflects the current status;
(3) Is physically or electronically signed; and
(4) Where possible, is machine readable.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|