+DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 November 2008 on waste and repealing certain Directives (Text with EEA relevance)
---+CHAPTER I SUBJECT MATTER, SCOPE AND DEFINITIONS
------+Article 1 Subject matter and scope
------+Article 2 Exclusions from the scope
---------+Article 2 1.
---------+Article 2 2.
---------+Article 2 3.
---------+Article 2 4.
------+Article 3 Definitions
------+Article 4 Waste hierarchy
---------+Article 4 1.
---------+Article 4 2.
---------+Article 4 3.
------+Article 5 By-products
---------+Article 5 1.
---------+Article 5 2.
---------+Article 5 3.
------+Article 6 End-of-waste status
---------+Article 6 1.
---------+Article 6 2.
---------+Article 6 3.
---------+Article 6 4.
---------+Article 6 5.
------+Article 7 List of waste
---------+Article 7 ►M41.
---------+Article 7 2.
---------+Article 7 3.
---------+Article 7 4.
---------+Article 7 6.
---------+Article 7 7.
---+CHAPTER II GENERAL REQUIREMENTS
------+Article 8 Extended producer responsibility
---------+Article 8 1.
---------+Article 8 2.
---------+Article 8 3.
---------+Article 8 4.
---------+Article 8 5.
------+Article 8a General minimum requirements for extended producer responsibility schemes
---------+Article 8a 1.
---------+Article 8a 2.
---------+Article 8a 3.
---------+Article 8a 4.
---------+Article 8a 5.
---------+Article 8a 6.
---------+Article 8a 7.
---------+Article 8a 8.
------+Article 9 Prevention of waste
---------+Article 9 1.
---------+Article 9 2.
---------+Article 9 3.
---------+Article 9 4.
---------+Article 9 7.
---------+Article 9 9.
------+Article 9a Prevention of food waste generation
---------+Article 9a 1.
---------+Article 9a 2.
---------+Article 9a 3.
---------+Article 9a 4.
---------+Article 9a 5.
---------+Article 9a 6.
---------+Article 9a 7.
---------+Article 9a 8.
---------+Article 9a 9.
------+Article 10 Recovery
---------+Article 10 1.
---------+Article 10 2.
---------+Article 10 3.
---------+Article 10 4.
---------+Article 10 5.
---------+Article 10 6.
------+Article 11 Preparing for re-use and recycling
---------+Article 11 1.
---------+Article 11 2.
---------+Article 11 3.
---------+Article 11 4.
---------+Article 11 5.
---------+Article 11 6.
---------+Article 11 7.
------+Article 11a Rules on the calculation of the attainment of the targets
---------+Article 11a 1.
---------+Article 11a 2.
---------+Article 11a 3.
---------+Article 11a 4.
---------+Article 11a 5.
---------+Article 11a 6.
---------+Article 11a 7.
---------+Article 11a 8.
---------+Article 11a 9.
---------+Article 11a 10.
------+Article 11b Early warning report
---------+Article 11b 1.
---------+Article 11b 2.
------+Article 12 Disposal
---------+Article 12 1.
---------+Article 12 2.
------+Article 13 Protection of human health and the environment
------+Article 14 Costs
---------+Article 14 1.
---------+Article 14 2.
---+CHAPTER III WASTE MANAGEMENT
------+Article 15 Responsibility for waste management
---------+Article 15 1.
---------+Article 15 2.
---------+Article 15 3.
---------+Article 15 4.
------+Article 16 Principles of self-sufficiency and proximity
---------+Article 16 1.
---------+Article 16 2.
---------+Article 16 3.
---------+Article 16 4.
------+Article 17 Control of hazardous waste
------+Article 18 Ban on the mixing of hazardous waste
---------+Article 18 1.
---------+Article 18 2.
---------+Article 18 3.
------+Article 19 Labelling of hazardous waste
---------+Article 19 1.
---------+Article 19 2.
------+Article 20 Hazardous waste produced by households
---------+Article 20 1.
---------+Article 20 2.
---------+Article 20 3.
---------+Article 20 4.
------+Article 21 Waste oils
---------+Article 21 1.
---------+Article 21 2.
---------+Article 21 3.
---------+Article 21 4.
------+Article 22 Bio-waste
---------+Article 22 1.
---------+Article 22 2.
---------+Article 22 3.
------+Article 22a Extended producer responsibility scheme for textiles
---------+Article 22a 1.
---------+Article 22a 2.
---------+Article 22a 3.
---------+Article 22a 4.
---------+Article 22a 5.
---------+Article 22a 6.
---------+Article 22a 7.
---------+Article 22a 8.
---------+Article 22a 9.
---------+Article 22a 10.
---------+Article 22a 11.
---------+Article 22a 12.
---------+Article 22a 13.
---------+Article 22a 14.
---------+Article 22a 15.
---------+Article 22a 16.
---------+Article 22a 17.
------+Article 22b Register of producers of textile, textile-related or footwear products
---------+Article 22b 1.
---------+Article 22b 2.
---------+Article 22b 3.
---------+Article 22b 4.
---------+Article 22b 5.
---------+Article 22b 6.
---------+Article 22b 7.
---------+Article 22b 8.
---------+Article 22b 9.
---------+Article 22b 10.
------+Article 22c Producer responsibility organisations for textiles
---------+Article 22c 1.
---------+Article 22c 2.
---------+Article 22c 3.
---------+Article 22c 4.
---------+Article 22c 5.
---------+Article 22c 6.
---------+Article 22c 7.
---------+Article 22c 8.
---------+Article 22c 9.
---------+Article 22c 10.
---------+Article 22c 11.
---------+Article 22c 12.
---------+Article 22c 13.
---------+Article 22c 14.
---------+Article 22c 15.
---------+Article 22c 16.
---------+Article 22c 17.
---------+Article 22c 18.
---------+Article 22c 19.
---------+Article 22c 20.
------+Article 22d Management of waste textiles
---------+Article 22d 1.
---------+Article 22d 2.
---------+Article 22d 3.
---------+Article 22d 4.
---------+Article 22d 5.
---------+Article 22d 6.
---------+Article 22d 7.
---------+Article 22d 8.
---------+Article 22d 9.
---------+Article 22d 10.
---+CHAPTER IV PERMITS AND REGISTRATIONS
------+Article 23 Issue of permits
---------+Article 23 1.
---------+Article 23 2.
---------+Article 23 3.
---------+Article 23 4.
---------+Article 23 5.
------+Article 24 Exemptions from permit requirements
------+Article 25 Conditions for exemptions
---------+Article 25 1.
---------+Article 25 2.
---------+Article 25 3.
------+Article 26 Registration
------+Article 27 Minimum standards
---------+Article 27 1.
---------+Article 27 2.
---------+Article 27 3.
---------+Article 27 4.
---+CHAPTER V PLANS AND PROGRAMMES
------+Article 28 Waste management plans
---------+Article 28 1.
---------+Article 28 2.
---------+Article 28 3.
---------+Article 28 4.
---------+Article 28 5.
------+Article 29 Waste prevention programmes
---------+Article 29 1.
---------+Article 29 2.
---------+Article 29 2a.
---------+Article 29 5.
------+Article 29a Food waste prevention programmes
---------+Article 29a 1.
---------+Article 29a 2.
------+Article 30 Evaluation and review of plans and programmes
---------+Article 30 1.
---------+Article 30 2.
------+Article 31 Public participation
------+Article 32 Cooperation
------+Article 33 Information to be submitted to the Commission
---------+Article 33 1.
---------+Article 33 2.
---+CHAPTER VI INSPECTIONS AND RECORDS
------+Article 34 Inspections
---------+Article 34 1.
---------+Article 34 2.
---------+Article 34 3.
------+Article 35 Record keeping
---------+Article 35 1.
---------+Article 35 2.
---------+Article 35 3.
---------+Article 35 4.
---------+Article 35 5.
------+Article 36 Enforcement and penalties
---------+Article 36 1.
---------+Article 36 2.
---+CHAPTER VII FINAL PROVISIONS
------+Article 37 Reporting
---------+Article 37 1.
---------+Article 37 2.
---------+Article 37 3.
---------+Article 37 4.
---------+Article 37 5.
---------+Article 37 5a.
---------+Article 37 6.
---------+Article 37 7.
------+Article 38 Exchange of information and sharing of best practices, interpretation and adaptation to technical progress
---------+Article 38 1.
---------+Article 38 2.
---------+Article 38 3.
------+Article 38a Exercise of the delegation
---------+Article 38a 1.
---------+Article 38a 2.
---------+Article 38a 3.
---------+Article 38a 4.
---------+Article 38a 5.
---------+Article 38a 6.
------+Article 39 Committee procedure
---------+Article 39 1.
---------+Article 39 2.
------+Article 40 Transposition
---------+Article 40 1.
---------+Article 40 2.
------+Article 41 Repeal and transitional provisions
------+Article 41a Review
------+Article 42 Entry into force
------+Article 43 Addressees
---+ANNEX I
---+ANNEX II
---+ANNEX III PROPERTIES OF WASTE WHICH RENDER IT HAZARDOUS
---+ANNEX IV
---+ANNEX IVa
---+ANNEX IVb
---+ANNEX IVc PRODUCTS THAT FALL WITHIN THE SCOPE OF THE EXTENDED PRODUCER RESPONSIBILITY FOR CERTAIN TEXTILE, TEXTILE-RELATED AND FOOTWEAR PRODUCTS
---+ANNEX V
|
English -
European Union -
Environment -
DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 November 2008 on waste and repealing certain Directives (Text with EEA relevance)
DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 19 November 2008
on waste and repealing certain Directives
(Text with EEA relevance)
1. Apžvalga
| Pavadinimas |
Reguliavimas |
|
CHAPTER I SUBJECT MATTER, SCOPE AND DEFINITIONS
|
CHAPTER I SUBJECT MATTER, SCOPE AND DEFINITIONS
|
|
CHAPTER II GENERAL REQUIREMENTS
|
CHAPTER II GENERAL REQUIREMENTS
|
|
CHAPTER III WASTE MANAGEMENT
|
CHAPTER III WASTE MANAGEMENT
|
|
CHAPTER IV PERMITS AND REGISTRATIONS
|
CHAPTER IV PERMITS AND REGISTRATIONS
|
|
CHAPTER V PLANS AND PROGRAMMES
|
CHAPTER V PLANS AND PROGRAMMES
|
|
CHAPTER VI INSPECTIONS AND RECORDS
|
CHAPTER VI INSPECTIONS AND RECORDS
|
|
CHAPTER VII FINAL PROVISIONS
|
CHAPTER VII FINAL PROVISIONS
|
|
ANNEX I
|
ANNEX I
DISPOSAL OPERATIONS
D 1 Deposit into or on to land (e.g. landfill, etc.)
D 2 Land treatment (e.g. biodegradation of liquid or sludgy discards in soils, etc.)
D 3 Deep injection (e.g. injection of pumpable discards into wells, salt domes or naturally occurring repositories, etc.)
D 4 Surface impoundment (e.g. placement of liquid or sludgy discards into pits, ponds or lagoons, etc.)
D 5 Specially engineered landfill (e.g. placement into lined discrete cells which are capped and isolated from one another and the environment, etc.)
D 6 Release into a water body except seas/oceans
D 7 Release to seas/oceans including sea-bed insertion
D 8 Biological treatment not specified elsewhere in this Annex which results in final compounds or mixtures which are discarded by means of any of the operations numbered D 1 to D 12
D 9 Physico-chemical treatment not specified elsewhere in this Annex which results in final compounds or mixtures which are discarded by means of any of the operations numbered D 1 to D 12 (e.g. evaporation, drying, calcination, etc.)
D 10 Incineration on land
D 11 Incineration at sea (
*5
)
D 12 Permanent storage (e.g. emplacement of containers in a mine, etc.)
D 13 Blending or mixing prior to submission to any of the operations numbered D 1 to D 12 (
*6
)
D 14 Repackaging prior to submission to any of the operations numbered D 1 to D 13
D 15 Storage pending any of the operations numbered D 1 to D 14 (excluding temporary storage, pending collection, on the site where the waste is produced) (
*7
)
|
|
ANNEX II
|
ANNEX II
RECOVERY OPERATIONS
R 1 Use principally as a fuel or other means to generate energy (
*8
)
R 2 Solvent reclamation/regeneration
▼M4
R 3 Recycling/reclamation of organic substances which are not used as solvents (including composting and other biological transformation processes) (
*9
)
R 4 Recycling/reclamation of metals and metal compounds (
*10
)
R 5 Recycling/reclamation of other inorganic materials (
*11
)
▼B
R 6 Regeneration of acids or bases
R 7 Recovery of components used for pollution abatement
R 8 Recovery of components from catalysts
R 9 Oil re-refining or other reuses of oil
R 10 Land treatment resulting in benefit to agriculture or ecological improvement
R 11 Use of waste obtained from any of the operations numbered R 1 to R 10
R 12 Exchange of waste for submission to any of the operations numbered R 1 to R 11 (
*12
)
R 13 Storage of waste pending any of the operations numbered R 1 to R 12 (excluding temporary storage, pending collection, on the site where the waste is produced) (
*13
)
|
|
ANNEX III PROPERTIES OF WASTE WHICH RENDER IT HAZARDOUS
|
ANNEX III
PROPERTIES OF WASTE WHICH RENDER IT HAZARDOUS
|
‘Explosive:’
|
waste which is capable by chemical reaction of producing gas at such a temperature and pressure and at such a speed as to cause damage to the surroundings. Pyrotechnic waste, explosive organic peroxide waste and explosive self-reactive waste is included.
When a waste contains one or more substances classified by one of the hazard class and category codes and hazard statement codes shown in Table 1, the waste shall be assessed for HP 1, where appropriate and proportionate, according to test methods. If the presence of a substance, a mixture or an article indicates that the waste is explosive, it shall be classified as hazardous by HP 1.
Table 1: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents for the classification of wastes as hazardous by HP 1:
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
|
Unst. Expl.
|
H 200
|
|
Expl. 1.1
|
H 201
|
|
Expl. 1.2
|
H 202
|
|
Expl. 1.3
|
H 203
|
|
Expl. 1.4
|
H 204
|
|
Self-react. A
|
H 240
|
|
Org. Perox. A
|
|
Self-react. B
|
H 241
|
|
Org. Perox. B
|
|
|
‘Oxidising:’
|
waste which may, generally by providing oxygen, cause or contribute to the combustion of other materials.
When a waste contains one or more substances classified by one of the hazard class and category codes and hazard statement codes shown in Table 2, the waste shall be assessed for HP 2, where appropriate and proportionate, according to test methods. If the presence of a substance indicates that the waste is oxidising, it shall be classified as hazardous by HP 2.
Table 2: Hazard Class and Category Code(s) and Hazard statement Code(s) for the classification of wastes as hazardous by HP 2:
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
|
Ox. Gas 1
|
H 270
|
|
Ox. Liq. 1
|
H 271
|
|
Ox. Sol. 1
|
|
Ox. Liq. 2, Ox. Liq. 3
|
H 272
|
|
Ox. Sol. 2, Ox. Sol. 3
|
|
|
‘Flammable:’
|
|
—
|
flammable liquid waste:liquid waste having a flash point below 60 °C or waste gas oil, diesel and light heating oils having a flash point > 55 °C and ≤ 75 °C;
|
|
—
|
flammable pyrophoric liquid and solid waste:solid or liquid waste which, even in small quantities, is liable to ignite within five minutes after coming into contact with air;
|
|
—
|
flammable solid waste:solid waste which is readily combustible or may cause or contribute to fire through friction;
|
|
—
|
flammable gaseous waste:gaseous waste which is flammable in air at 20 °C and a standard pressure of 101.3 kPa;
|
|
—
|
water reactive waste:waste which, in contact with water, emits flammable gases in dangerous quantities;
|
|
—
|
other flammable waste:flammable aerosols, flammable self-heating waste, flammable organic peroxides and flammable self-reactive waste.
|
When a waste contains one or more substances classified by one of the following hazard class and category codes and hazard statement codes shown in Table 3, the waste shall be assessed, where appropriate and proportionate, according to test methods. If the presence of a substance indicates that the waste is flammable, it shall be classified as hazardous by HP 3.
Table 3: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents for the classification of wastes as hazardous by HP 3:
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
|
Flam. Gas 1
|
H220
|
|
Flam. Gas 2
|
H221
|
|
Aerosol 1
|
H222
|
|
Aerosol 2
|
H223
|
|
Flam. Liq. 1
|
H224
|
|
Flam. Liq.2
|
H225
|
|
Flam. Liq. 3
|
H226
|
|
Flam. Sol. 1
|
H228
|
|
Flam. Sol. 2
|
|
Self-react. CD
|
H242
|
|
Self-react. EF
|
|
Org. Perox. CD
|
|
Org. Perox. EF
|
|
Pyr. Liq. 1
|
H250
|
|
Pyr. Sol. 1
|
|
Self-heat.1
|
H251
|
|
Self-heat. 2
|
H252
|
|
Water-react. 1
|
H260
|
|
Water-react. 2
Water-react. 3
|
H261
|
|
|
‘Irritant — skin irritation and eye damage:’
|
waste which on application can cause skin irritation or damage to the eye.
When a waste contains one or more substances in concentrations above the cut-off value, that are classified by one of the following hazard class and category codes and hazard statement codes and one or more of the following concentration limits is exceeded or equalled, the waste shall be classified as hazardous by HP 4.
The cut-off value for consideration in an assessment for Skin corr. 1A (H314), Skin irrit. 2 (H315), Eye dam. 1 (H318) and Eye irrit. 2 (H319) is 1 %.
If the sum of the concentrations of all substances classified as Skin corr. 1A (H314) exceeds or equals 1 %, the waste shall be classified as hazardous according to HP 4.
If the sum of the concentrations of all substances classified as H318 exceeds or equals 10 %, the waste shall be classified as hazardous according to HP 4.
If the sum of the concentrations of all substances classified H315 and H319 exceeds or equals 20 %, the waste shall be classified as hazardous according to HP 4.
Note that wastes containing substances classified as H314 (Skin corr.1A, 1B or 1C) in amounts greater than or equal to 5 % will be classified as hazardous by HP 8. HP 4 will not apply if the waste is classified as HP 8.
|
|
‘Specific Target Organ Toxicity (STOT)/Aspiration Toxicity:’
|
waste which can cause specific target organ toxicity either from a single or repeated exposure, or which cause acute toxic effects following aspiration.
When a waste contains one or more substances classified by one or more of the following hazard class and category codes and hazard statement codes shown in Table 4, and one or more of the concentration limits in Table 4 is exceeded or equalled, the waste shall be classified as hazardous according to HP 5. When substances classified as STOT are present in a waste, an individual substance has to be present at or above the concentration limit for the waste to be classified as hazardous by HP 5.
When a waste contains one or more substances classified as Asp. Tox. 1 and the sum of those substances exceeds or equals the concentration limit, the waste shall be classified as hazardous by HP 5 only where the overall kinematic viscosity (at 40 °C) does not exceed 20.5 mm2/s. (
27
)
Table 4: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents and the corresponding concentration limits for the classification of wastes as hazardous by HP 5
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
Concentration limit
|
|
STOT SE 1
|
H370
|
1 %
|
|
STOT SE 2
|
H371
|
10 %
|
|
STOT SE 3
|
H335
|
20 %
|
|
STOT RE 1
|
H372
|
1 %
|
|
STOT RE 2
|
H373
|
10 %
|
|
Asp. Tox. 1
|
H304
|
10 %
|
|
|
‘Acute Toxicity:’
|
waste which can cause acute toxic effects following oral or dermal administration, or inhalation exposure.
If the sum of the concentrations of all substances contained in a waste, classified with an acute toxic hazard class and category code and hazard statement code given in Table 5, exceeds or equals the threshold given in that table, the waste shall be classified as hazardous by HP 6. When more than one substance classified as acute toxic is present in a waste, the sum of the concentrations is required only for substances within the same hazard category.
The following cut-off values shall apply for consideration in an assessment:
—
For Acute Tox. 1, 2 or 3 (H300, H310, H330, H301, H311, H331): 0.1 %;
—
For Acute Tox. 4 (H302, H312, H332): 1 %.
Table 5: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents and the corresponding concentration limits for the classification of wastes as hazardous by HP 6
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
Concentration limit
|
|
Acute Tox.1 (Oral)
Acute Tox. 2 (Oral)
Acute Tox. 3 (Oral)
Acute Tox 4 (Oral)
Acute Tox.1 (Dermal)
Acute Tox.2 (Dermal)
Acute Tox. 3 (Dermal)
Acute Tox 4 (Dermal)
Acute Tox 1 (Inhal.)
Acute Tox.2 (Inhal.)
Acute Tox. 3 (Inhal.)
Acute Tox. 4 (Inhal.)
|
H300
H300
H301
H302
H310
H310
H311
H312
H330
H330
H331
H332
|
0,1 %
0,25 %
5 %
25 %
0,25 %
2,5 %
15 %
55 %
0,1 %
0,5 %
3,5 %
22,5 %
|
|
|
‘Carcinogenic:’
|
waste which induces cancer or increases its incidence.
When a waste contains a substance classified by one of the following hazard class and category codes and hazard statement codes and exceeds or equals one of the following concentration limits shown in Table 6, the waste shall be classified as hazardous by HP 7. When more than one substance classified as carcinogenic is present in a waste, an individual substance has to be present at or above the concentration limit for the waste to be classified as hazardous by HP 7.
Table 6: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents and the corresponding concentration limits for the classification of wastes as hazardous by HP 7
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
Concentration limit
|
|
Carc. 1A
|
H350
|
0,1 %
|
|
Carc. 1B
|
|
Carc. 2
|
H351
|
1,0 %
|
|
|
‘Corrosive:’
|
waste which on application can cause skin corrosion.
When a waste contains one or more substances classified as Skin corr.1A, 1B or 1C (H314) and the sum of their concentrations exceeds or equals 5 %, the waste shall be classified as hazardous by HP 8.
The cut-off value for consideration in an assessment for Skin corr. 1A, 1B, 1C (H314) is 1.0 %.
|
|
‘Infectious:’
|
waste containing viable micro-organisms or their toxins which are known or reliably believed to cause disease in man or other living organisms.
The attribution of HP 9 shall be assessed by the rules laid down in reference documents or legislation in the Member States.
|
|
‘Toxic for reproduction:’
|
waste which has adverse effects on sexual function and fertility in adult males and females, as well as developmental toxicity in the offspring.
When a waste contains a substance classified by one of the following hazard class and category codes and hazard statement codes and exceeds or equals one of the following concentration limits shown in Table 7, the waste shall be classified hazardous according to HP 10. When more than one substance classified as toxic for reproduction is present in a waste, an individual substance has to be present at or above the concentration limit for the waste to be classified as hazardous by HP 10.
Table 7: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents and the corresponding concentration limits for the classification of wastes as hazardous by HP 10
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
Concentration limit
|
|
Repr. 1A
|
H360
|
0,3 %
|
|
Repr. 1B
|
|
Repr. 2
|
H361
|
3,0 %
|
|
|
‘Mutagenic:’
|
waste which may cause a mutation, that is a permanent change in the amount or structure of the genetic material in a cell.
When a waste contains a substance classified by one of the following hazard class and category codes and hazard statement codes and exceeds or equals one of the following concentration limits shown in Table 8, the waste shall be classified as hazardous according to HP 11. When more than one substance classified as mutagenic is present in a waste, an individual substance has to be present at or above the concentration limit for the waste to be classified as hazardous by HP 11.
Table 8: Hazard Class and Category Code(s) and Hazard statement Code(s) for waste constituents and the corresponding concentration limits for the classification of wastes as hazardous by HP 11
|
Hazard Class and Category Code(s)
|
Hazard statement Code(s)
|
Concentration limit
|
|
Muta. 1A,
|
H340
|
0,1 %
|
|
Muta. 1B
|
|
Muta. 2
|
H341
|
1,0 %
|
|
|
‘Release of an acute toxic gas:’
|
waste which releases acute toxic gases (Acute Tox. 1, 2 or 3) in contact with water or an acid.
When a waste contains a substance assigned to one of the following supplemental hazards EUH029, EUH031 and EUH032, it shall be classified as hazardous by HP 12 according to test methods or guidelines.
|
|
‘Sensitising:’
|
waste which contains one or more substances known to cause sensitising effects to the skin or the respiratory organs.
When a waste contains a substance classified as sensitising and is assigned to one of the hazard statement codes H317 or H334 and one individual substance equals or exceeds the concentration limit of 10 %, the waste shall be classified as hazardous by HP 13.
|
▼M3
|
‘Ecotoxic:’
|
waste which presents or may present immediate or delayed risks for one or more sectors of the environment.
Waste which fulfils any of the following conditions shall be classified as hazardous by HP 14:
—
Waste which contains a substance classified as ozone depleting assigned the hazard statement code H420 in accordance with Regulation (EC) No 1272/2008 of the European Parliament and of the Council (
28
) and the concentration of such a substance equals or exceeds the concentration limit of 0,1 %.
[c(H420) ≥ 0,1 %]
—
Waste which contains one or more substances classified as aquatic acute assigned the hazard statement code H400 in accordance with Regulation (EC) No 1272/2008 and the sum of the concentrations of those substances equals or exceeds the concentration limit of 25 %. A cut-off value of 0,1 % shall apply to such substances.
[Σ c (H400) ≥ 25 %]
—
Waste which contains one or more substances classified as aquatic chronic 1, 2 or 3 assigned to the hazard statement code(s) H410, H411 or H412 in accordance with Regulation (EC) No 1272/2008, and the sum of the concentrations of all substances classified as aquatic chronic 1 (H410) multiplied by 100 added to the sum of the concentrations of all substances classified as aquatic chronic 2 (H411) multiplied by 10 added to the sum of the concentrations of all substances classified as aquatic chronic 3 (H412) equals or exceeds the concentration limit of 25 %. A cut-off value of 0,1 % applies to substances classified as H410 and a cut-off value of 1 % applies to substances classified as H411 or H412.
[100 × Σc (H410) + 10 × Σc (H411) + Σc (H412) ≥ 25 %]
—
Waste which contains one or more substances classified as aquatic chronic 1, 2, 3 or 4 assigned the hazard statement code(s) H410, H411, H412 or H413 in accordance with Regulation (EC) No 1272/2008, and the sum of the concentrations of all substances classified as aquatic chronic equals or exceeds the concentration limit of 25 %. A cut-off value of 0,1 % applies to substances classified as H410 and a cut-off value of 1 % applies to substances classified as H411, H412 or H413.
[Σ c H410 + Σ c H411 + Σ c H412 + Σ c H413 ≥ 25 %]
Where: Σ = sum and c = concentrations of the substances.
|
▼M1
|
‘Waste capable of exhibiting a hazardous property listed above not directly displayed by the original waste’.
|
When a waste contains one or more substances assigned to one of the hazard statements or supplemental hazards shown in Table 9, the waste shall be classified as hazardous by HP 15, unless the waste is in such a form that it will not under any circumstance exhibit explosive or potentially explosive properties.
Table 9: Hazard statements and supplemental hazards for waste constituents for the classification of wastes as hazardous by HP 15
|
Hazard Statement(s)/Supplemental Hazard(s)
|
|
May mass explode in fire
|
H205
|
|
Explosive when dry
|
EUH001
|
|
May form explosive peroxides
|
EUH019
|
|
Risk of explosion if heated under confinement
|
EUH044
|
In addition, Member States may characterise a waste as hazardous by HP 15 based on other applicable criteria, such as an assessment of the leachate.
▼M3 —————
▼C2
Test methods:
The methods to be used are described in Commission Regulation (EC) No 440/2008 (
29
) and in other relevant CEN notes or other internationally recognised test methods and guidelines.
|
|
|
ANNEX IV
|
ANNEX IV
EXAMPLES OF WASTE PREVENTION MEASURES REFERRED TO IN ARTICLE 29
Measures that can affect the framework conditions related to the generation of waste
1. The use of planning measures, or other economic instruments promoting the efficient use of resources.
2. The promotion of research and development into the area of achieving cleaner and less wasteful products and technologies and the dissemination and use of the results of such research and development.
3. The development of effective and meaningful indicators of the environmental pressures associated with the generation of waste aimed at contributing to the prevention of waste generation at all levels, from product comparisons at Community level through action by local authorities to national measures.
Measures that can affect the design and production and distribution phase
4. The promotion of eco-design (the systematic integration of environmental aspects into product design with the aim to improve the environmental performance of the product throughout its whole life cycle).
5. The provision of information on waste prevention techniques with a view to facilitating the implementation of best available techniques by industry.
6. Organise training of competent authorities as regards the insertion of waste prevention requirements in permits under this Directive and Directive 96/61/EC.
7. The inclusion of measures to prevent waste production at installations not falling under Directive 96/61/EC. Where appropriate, such measures could include waste prevention assessments or plans.
8. The use of awareness campaigns or the provision of financial, decision making or other support to businesses. Such measures are likely to be particularly effective where they are aimed at, and adapted to, small and medium sized enterprises and work through established business networks.
9. The use of voluntary agreements, consumer/producer panels or sectoral negotiations in order that the relevant businesses or industrial sectors set their own waste prevention plans or objectives or correct wasteful products or packaging.
10. The promotion of creditable environmental management systems, including EMAS and ISO 14001.
Measures that can affect the consumption and use phase
11. Economic instruments such as incentives for clean purchases or the institution of an obligatory payment by consumers for a given article or element of packaging that would otherwise be provided free of charge.
12. The use of awareness campaigns and information provision directed at the general public or a specific set of consumers.
13. The promotion of creditable eco-labels.
14. Agreements with industry, such as the use of product panels such as those being carried out within the framework of Integrated Product Policies or with retailers on the availability of waste prevention information and products with a lower environmental impact.
15. In the context of public and corporate procurement, the integration of environmental and waste prevention criteria into calls for tenders and contracts, in line with the Handbook on environmental public procurement published by the Commission on 29 October 2004.
16. The promotion of the reuse and/or repair of appropriate discarded products or of their components, notably through the use of educational, economic, logistic or other measures such as support to or establishment of accredited repair and reuse-centres and networks especially in densely populated regions.
|
|
ANNEX IVa
|
ANNEX IVa
EXAMPLES OF ECONOMIC INSTRUMENTS AND OTHER MEASURES TO PROVIDE INCENTIVES FOR THE APPLICATION OF THE WASTE HIERARCHY REFERRED TO IN ARTICLE 4(3) (
30
)
1.
Charges and restrictions for the landfilling and incineration of waste which incentivise waste prevention and recycling, while keeping landfilling the least preferred waste management option;
2.
‘Pay-as-you-throw’ schemes that charge waste producers on the basis of the actual amount of waste generated and provide incentives for separation at source of recyclable waste and for reduction of mixed waste;
3.
Fiscal incentives for donation of products, in particular food;
4.
Extended producer responsibility schemes for various types of waste and measures to increase their effectiveness, cost efficiency and governance;
5.
Deposit-refund schemes and other measures to encourage efficient collection of used products and materials;
6.
Sound planning of investments in waste management infrastructure, including through Union funds;
7.
Sustainable public procurement to encourage better waste management and the use of recycled products and materials;
8.
Phasing out of subsidies which are not consistent with the waste hierarchy;
9.
Use of fiscal measures or other means to promote the uptake of products and materials that are prepared for re-use or recycled;
10.
Support to research and innovation in advanced recycling technologies and remanufacturing;
11.
Use of best available techniques for waste treatment;
12.
Economic incentives for regional and local authorities, in particular to promote waste prevention and intensify separate collection schemes, while avoiding support to landfilling and incineration;
13.
Public awareness campaigns, in particular on separate collection, waste prevention and litter reduction, and mainstreaming these issues in education and training;
14.
Systems for coordination, including by digital means, between all competent public authorities involved in waste management;
15.
Promoting continuous dialogue and cooperation between all stakeholders in waste management and encouraging voluntary agreements and company reporting on waste.
|
|
ANNEX IVb
|
ANNEX IVb
IMPLEMENTATION PLAN TO BE SUBMITTED PURSUANT TO ARTICLE 11(3)
The implementation plan to be submitted pursuant to Article 11(3) shall contain the following:
1.
assessment of the past, current and projected rates of recycling, landfilling and other treatment of municipal waste and the streams of which it is composed;
2.
assessment of the implementation of waste management plans and waste prevention programmes in place pursuant to Articles 28 and 29;
3.
reasons for which the Member State considers that it might not be able to attain the relevant target laid down in Article 11(2) within the deadline set therein and an assessment of the time extension necessary to meet that target;
4.
measures necessary to attain the targets set out in Article 11(2) and (5) that are applicable to the Member State during the time extension, including appropriate economic instruments and other measures to provide incentives for the application of the waste hierarchy as set out in Article 4(1) and Annex IVa;
5.
a timetable for the implementation of the measures identified in point 4, determination of the body competent for their implementation and an assessment of their individual contribution to attaining the targets applicable in the event of a time extension;
6.
information on funding for waste management in line with the polluter-pays principle;
7.
measures to improve data quality, as appropriate, with a view to better planning and monitoring performance in waste management.
|
|
ANNEX IVc PRODUCTS THAT FALL WITHIN THE SCOPE OF THE EXTENDED PRODUCER RESPONSIBILITY FOR CERTAIN TEXTILE, TEXTILE-RELATED AND FOOTWEAR PRODUCTS
|
ANNEX IVc
PRODUCTS THAT FALL WITHIN THE SCOPE OF THE EXTENDED PRODUCER RESPONSIBILITY FOR CERTAIN TEXTILE, TEXTILE-RELATED AND FOOTWEAR PRODUCTS
Part I
Textile products, and textile articles of apparel and clothing accessories for household use or other uses, where such products are similar in nature and composition to those for household use, that fall within the scope of Article 22a
|
CN code
|
Description
|
|
61 – all listed codes within the chapter
|
Articles of apparel and clothing accessories, knitted or crocheted
|
|
62 – all listed codes within the chapter
|
Articles of apparel and clothing accessories, not knitted or crocheted
|
|
6301
|
Blankets and travelling rugs (except 6301 10 00 )
|
|
6302
|
Bed linen, table linen, toilet linen and kitchen linen
|
|
6303
|
Curtains (including drapes) and interior blinds; curtain or bed valances
|
|
6304
|
Other furnishing articles, excluding those of heading 9404
|
|
6309
|
Worn clothing and other worn articles
|
|
6504
|
Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed
|
|
6505
|
Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hairnets of any material, whether or not lined or trimmed
|
Part II
Footwear, and articles of apparel and clothing accessories for household use or other uses, where such products are similar in nature and composition to those for household use, whose main composition is not textile, that fall within the scope of Article 22a
|
CN code
|
Description
|
|
4203
|
Articles of apparel and clothing accessories, of leather or composition leather (excl. footwear and headgear and parts thereof, and goods of chapter 95, e.g. shin guards, fencing masks)
|
|
6401
|
Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes
|
|
6402
|
Other footwear with outer soles and uppers of rubber or plastics
|
|
6403
|
Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather
|
|
6404
|
Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials
|
|
6405
|
Other footwear
|
|
|
ANNEX V
|
ANNEX V
CORRELATION TABLE
|
Directive 2006/12/EC
|
This Directive
|
|
Article 1(1)(a)
|
Article 3(1)
|
|
Article 1(1)(b)
|
Article 3(5)
|
|
Article 1(1)(c)
|
Article 3(6)
|
|
Article 1(1)(d)
|
Article 3(9)
|
|
Article 1(1)(e)
|
Article 3(19)
|
|
Article 1(1)(f)
|
Article 3(15)
|
|
Article 1(1)(g)
|
Article 3(10)
|
|
Article 1(2)
|
Article 7
|
|
Article 2(1)
|
Article 2(1)
|
|
Article 2(1)(a)
|
Article 2(1)(a)
|
|
Article 2(1)(b)
|
Article 2(2)
|
|
Article 2(1)(b)(i)
|
Article 2(1)(d)
|
|
Article 2(1)(b)(ii)
|
Article 2(2)(d)
|
|
Article 2(1)(b)(iii)
|
Article 2(1)(f) and (2)(c)
|
|
Article 2(1)(b)(iv)
|
Article 2(2)(a)
|
|
Article 2(1)(b)(v)
|
Article 2(1)(e)
|
|
Article 2(2)
|
Article 2(4)
|
|
Article 3(1)
|
Article 4
|
|
Article 4(1)
|
Article 13
|
|
Article 4(2)
|
Article 36(1)
|
|
Article 5
|
Article 16
|
|
Article 6
|
—
|
|
Article 7
|
Article 28
|
|
Article 8
|
Article 15
|
|
Article 9
|
Article 23
|
|
Article 10
|
Article 23
|
|
Article 11
|
Articles 24 and 25
|
|
Article 12
|
Article 26
|
|
Article 13
|
Article 34
|
|
Article 14
|
Article 35
|
|
Article 15
|
Article 14
|
|
Article 16
|
Article 37
|
|
Article 17
|
Article 38
|
|
Article 18(1)
|
Article 39(1)
|
|
—
|
Article 39(2)
|
|
Article 18(2)
|
—
|
|
Article 18(3)
|
Article 39(3)
|
|
Article 19
|
Article 40
|
|
Article 20
|
—
|
|
Article 21
|
Article 42
|
|
Article 22
|
Article 43
|
|
Annex I
|
—
|
|
Annex IIA
|
Annex I
|
|
Annex IIB
|
Annex II
|
|
Directive 75/439/EEC
|
This Directive
|
|
Article 1(1)
|
Article 3(18)
|
|
Article 2
|
Articles 13 and 21
|
|
Article 3(1) and (2)
|
—
|
|
Article 3(3)
|
Article 13
|
|
Article 4
|
Article 13
|
|
Article 5(1)
|
—
|
|
Article 5(2)
|
—
|
|
Article 5(3)
|
—
|
|
Article 5(4)
|
Articles 26 and 34
|
|
Article 6
|
Article 23
|
|
Article 7(a)
|
Article 13
|
|
Article 7(b)
|
—
|
|
Article 8(1)
|
—
|
|
Article 8(2)(a)
|
—
|
|
Article 8(2)(b)
|
—
|
|
Article 8(3)
|
—
|
|
Article 9
|
—
|
|
Article 10(1)
|
Article 18
|
|
Article 10(2)
|
Article 13
|
|
Article 10(3) and (4)
|
—
|
|
Article 10(5)
|
Articles 19, 21, 25, 34 and 35
|
|
Article 11
|
—
|
|
Article 12
|
Article 35
|
|
Article 13(1)
|
Article 34
|
|
Article 13(2)
|
—
|
|
Article 14
|
—
|
|
Article 15
|
—
|
|
Article 16
|
—
|
|
Article 17
|
—
|
|
Article 18
|
Article 37
|
|
Article 19
|
—
|
|
Article 20
|
—
|
|
Article 21
|
—
|
|
Article 22
|
—
|
|
Annex I
|
—
|
|
Directive 91/689/EEC
|
This Directive
|
|
Article 1(1)
|
—
|
|
Article 1(2)
|
—
|
|
Article 1(3)
|
—
|
|
Article 1(4)
|
Articles 3(2) and 7
|
|
Article 1(5)
|
Article 20
|
|
Article 2(1)
|
Article 23
|
|
Article 2(2)-(4)
|
Article 18
|
|
Article 3
|
Articles 24, 25 and 26
|
|
Article 4(1)
|
Article 34(1)
|
|
Article 4(2)(3)
|
Article 35
|
|
Article 5(1)
|
Article 19(1)
|
|
Article 5(2)
|
Article 34(2)
|
|
Article 5(3)
|
Article 19(2)
|
|
Article 6
|
Article 28
|
|
Article 7
|
—
|
|
Article 8
|
—
|
|
Article 9
|
—
|
|
Article 10
|
—
|
|
Article 11
|
—
|
|
Article 12
|
—
|
|
Annexes I and II
|
—
|
|
Annex III
|
Annex III
|
|
,
1.1 Nuorodos
1.2 Nustatyti reikalavimai
1.3 Susiję standartai
2. Nustatyti reikalavimai
Reikalavimai
| Šaltinis |
Reikalavimas |
3. Susiję standartai
Standartai
| Šaltinis |
Reikalavimas |
Susietos užduotys
|