The adversary is trying to communicate with compromised systems to control them.
Command and Control consists of techniques that adversaries may use to communicate with systems under their control within a victim network. Adversaries commonly attempt to mimic normal, expected traffic to avoid detection. There are many ways an adversary can establish command and control with various levels of stealth depending on the victim’s network structure and defenses.
Sottokwistjonijiet
| Titlu | Deskrizzjoni |
|---|---|
| Application Layer Protocol | Adversaries may communicate using OSI application layer protocols to avoid detection/network filtering by blending in with existing traffic. Commands to the remote system, and often the results of those commands, will be embedded within the protocol traffic between the client and server. Adversaries may utilize many different protocols, including those used for web browsing, transferring files, electronic mail, DNS, or publishing/subscribing. For connections that occur internally within an enclave (such as those between a proxy or pivot node and other nodes), commonly used protocols are SMB, SSH, or RDP.[1] References |
| Remote Access Tools | An adversary may use legitimate remote access tools to establish an interactive command and control channel within a network. Remote access tools create a session between two trusted hosts through a graphical interface, a command line interaction, a protocol tunnel via development or management software, or hardware-level access such as KVM (Keyboard, Video, Mouse) over IP solutions. Desktop support software (usually graphical interface) and remote management software (typically command line interface) allow a user to control a computer remotely as if they are a local user inheriting the user or software permissions. This software is commonly used for troubleshooting, software installation, and system management.[1],[2],[3] Adversaries may similarly abuse response features included in EDR and other defensive tools that enable remote access. Remote access tools may be installed and used post-compromise as an alternate communications channel for redundant access or to establish an interactive remote desktop session with the target system. It may also be used as a malware component to establish a reverse connection or back-connect to a service or adversary-controlled system. Installation of many remote access tools may also include persistence (e.g., the software's installation routine creates a Windows Service). Remote access modules/features may also exist as part of otherwise existing software (e.g., Google Chrome’s Remote Desktop).[4],[5] References
|
| Content Injection | Adversaries may gain access and continuously communicate with victims by injecting malicious content into systems through online network traffic. Rather than luring victims to malicious payloads hosted on a compromised website (i.e., Drive-by Target followed by Drive-by Compromise), adversaries may initially access victims through compromised data-transfer channels where they can manipulate traffic and/or inject their own content. These compromised online network channels may also be used to deliver additional payloads (i.e., Ingress Tool Transfer) and other data to already compromised systems.[1] Adversaries may inject content to victim systems in various ways, including:
Content injection is often the result of compromised upstream communication channels, for example at the level of an internet service provider (ISP) as is the case with "lawful interception."[3],[1],[4] References
|
| Traffic Signaling | Adversaries may use traffic signaling to hide open ports or other malicious functionality used for persistence or command and control. Traffic signaling involves the use of a magic value or sequence that must be sent to a system to trigger a special response, such as opening a closed port or executing a malicious task. This may take the form of sending a series of packets with certain characteristics before a port will be opened that the adversary can use for command and control. Usually this series of packets consists of attempted connections to a predefined sequence of closed ports (i.e. Port Knocking), but can involve unusual flags, specific strings, or other unique characteristics. After the sequence is completed, opening a port may be accomplished by the host-based firewall, but could also be implemented by custom software. Adversaries may also communicate with an already open port, but the service listening on that port will only respond to commands or trigger other malicious functionality if passed the appropriate magic value(s). The observation of the signal packets to trigger the communication can be conducted through different methods. One means, originally implemented by Cd00r[1], is to use the libpcap libraries to sniff for the packets in question. Another method leverages raw sockets, which enables the malware to use ports that are already open for use by other programs. On network devices, adversaries may use crafted packets to enable Network Device Authentication for standard services offered by the device such as telnet. Such signaling may also be used to open a closed service port such as telnet, or to trigger module modification of malware implants on the device, adding, removing, or changing malicious capabilities. Adversaries may use crafted packets to attempt to connect to one or more (open or closed) ports, but may also attempt to connect to a router interface, broadcast, and network address IP on the same port in order to achieve their goals and objectives.[2],[3],[4] To enable this traffic signaling on embedded devices, adversaries must first achieve and leverage Patch System Image due to the monolithic nature of the architecture. Adversaries may also use the Wake-on-LAN feature to turn on powered off systems. Wake-on-LAN is a hardware feature that allows a powered down system to be powered on, or woken up, by sending a magic packet to it. Once the system is powered on, it may become a target for lateral movement.[5],[6] References
|
| Protocol Tunneling | Adversaries may tunnel network communications to and from a victim system within a separate protocol to avoid detection/network filtering and/or enable access to otherwise unreachable systems. Tunneling involves explicitly encapsulating a protocol within another. This behavior may conceal malicious traffic by blending in with existing traffic and/or provide an outer layer of encryption (similar to a VPN). Tunneling could also enable routing of network packets that would otherwise not reach their intended destination, such as SMB, RDP, or other traffic that would be filtered by network appliances or not routed over the Internet. There are various means to encapsulate a protocol within another protocol. For example, adversaries may perform SSH tunneling (also known as SSH port forwarding), which involves forwarding arbitrary data over an encrypted SSH tunnel.[1],[2] Protocol Tunneling may also be abused by adversaries during Dynamic Resolution. Known as DNS over HTTPS (DoH), queries to resolve C2 infrastructure may be encapsulated within encrypted HTTPS packets.[3] Adversaries may also leverage Protocol Tunneling in conjunction with Proxy and/or Protocol or Service Impersonation to further conceal C2 communications and infrastructure. References
|
| Communication Through Removable Media | Adversaries can perform command and control between compromised hosts on potentially disconnected networks using removable media to transfer commands from system to system.[1] Both systems would need to be compromised, with the likelihood that an Internet-connected system was compromised first and the second through lateral movement by Replication Through Removable Media. Commands and files would be relayed from the disconnected system to the Internet-connected system to which the adversary has direct access. References |
| Proxy | Adversaries may use a connection proxy to direct network traffic between systems or act as an intermediary for network communications to a command and control server to avoid direct connections to their infrastructure. Many tools exist that enable traffic redirection through proxies or port redirection, including HTRAN, ZXProxy, and ZXPortMap.[1] Adversaries use these types of proxies to manage command and control communications, reduce the number of simultaneous outbound network connections, provide resiliency in the face of connection loss, or to ride over existing trusted communications paths between victims to avoid suspicion. Adversaries may chain together multiple proxies to further disguise the source of malicious traffic. Adversaries can also take advantage of routing schemes in Content Delivery Networks (CDNs) to proxy command and control traffic. References |
| Dynamic Resolution | Adversaries may dynamically establish connections to command and control infrastructure to evade common detections and remediations. This may be achieved by using malware that shares a common algorithm with the infrastructure the adversary uses to receive the malware's communications. These calculations can be used to dynamically adjust parameters such as the domain name, IP address, or port number the malware uses for command and control. Adversaries may use dynamic resolution for the purpose of Fallback Channels. When contact is lost with the primary command and control server malware may employ dynamic resolution as a means to reestablishing command and control.[1],[2],[3] References
|
| Web Service | Adversaries may use an existing, legitimate external Web service as a means for relaying data to/from a compromised system. Popular websites, cloud services, and social media acting as a mechanism for C2 may give a significant amount of cover due to the likelihood that hosts within a network are already communicating with them prior to a compromise. Using common services, such as those offered by Google, Microsoft, or Twitter, makes it easier for adversaries to hide in expected noise.[1] Web service providers commonly use SSL/TLS encryption, giving adversaries an added level of protection. Use of Web services may also protect back-end C2 infrastructure from discovery through malware binary analysis while also enabling operational resiliency (since this infrastructure may be dynamically changed). References |
| Multi-Stage Channels | Adversaries may create multiple stages for command and control that are employed under different conditions or for certain functions. Use of multiple stages may obfuscate the command and control channel to make detection more difficult. Remote access tools will call back to the first-stage command and control server for instructions. The first stage may have automated capabilities to collect basic host information, update tools, and upload additional files. A second remote access tool (RAT) could be uploaded at that point to redirect the host to the second-stage command and control server. The second stage will likely be more fully featured and allow the adversary to interact with the system through a reverse shell and additional RAT features. The different stages will likely be hosted separately with no overlapping infrastructure. The loader may also have backup first-stage callbacks or Fallback Channels in case the original first-stage communication path is discovered and blocked. |
| Multiband Communication | This technique has been deprecated and should no longer be used. Some adversaries may split communications between different protocols. There could be one protocol for inbound command and control and another for outbound data, allowing it to bypass certain firewall restrictions. The split could also be random to simply avoid data threshold alerts on any one communication. |
| Data Obfuscation | Adversaries may obfuscate command and control traffic to make it more difficult to detect.[1] Command and control (C2) communications are hidden (but not necessarily encrypted) in an attempt to make the content more difficult to discover or decipher and to make the communication less conspicuous and hide commands from being seen. This encompasses many methods, such as adding junk data to protocol traffic, using steganography, or impersonating legitimate protocols. References |
| Non-Standard Port | Adversaries may communicate using a protocol and port pairing that are typically not associated. For example, HTTPS over port 8088[1] or port 587[2] as opposed to the traditional port 443. Adversaries may make changes to the standard port used by a protocol to bypass filtering or muddle analysis/parsing of network data. Adversaries may also make changes to victim systems to abuse non-standard ports. For example, Registry keys and other configuration settings can be used to modify protocol and port pairings.[3] References
|
| Encrypted Channel | Adversaries may employ an encryption algorithm to conceal command and control traffic rather than relying on any inherent protections provided by a communication protocol. Despite the use of a secure algorithm, these implementations may be vulnerable to reverse engineering if secret keys are encoded and/or generated within malware samples/configuration files. |
| Non-Application Layer Protocol | Adversaries may use an OSI non-application layer protocol for communication between host and C2 server or among infected hosts within a network. The list of possible protocols is extensive.[1] Specific examples include use of network layer protocols, such as the Internet Control Message Protocol (ICMP), transport layer protocols, such as the User Datagram Protocol (UDP), session layer protocols, such as Socket Secure (SOCKS), as well as redirected/tunneled protocols, such as Serial over LAN (SOL). ICMP communication between hosts is one example.[2] Because ICMP is part of the Internet Protocol Suite, it is required to be implemented by all IP-compatible hosts.[3] However, it is not as commonly monitored as other Internet Protocols such as TCP or UDP and may be used by adversaries to hide communications. In ESXi environments, adversaries may leverage the Virtual Machine Communication Interface (VMCI) for communication between guest virtual machines and the ESXi host. This traffic is similar to client-server communications on traditional network sockets but is localized to the physical machine running the ESXi host, meaning it does not traverse external networks (routers, switches). This results in communications that are invisible to external monitoring and standard networking tools like tcpdump, netstat, nmap, and Wireshark. By adding a VMCI backdoor to a compromised ESXi host, adversaries may persistently regain access from any guest VM to the compromised ESXi host’s backdoor, regardless of network segmentation or firewall rules in place.[4] References
|
| Data Encoding | Adversaries may encode data to make the content of command and control traffic more difficult to detect. Command and control (C2) information can be encoded using a standard data encoding system. Use of data encoding may adhere to existing protocol specifications and includes use of ASCII, Unicode, Base64, MIME, or other binary-to-text and character encoding systems.[1],[2] Some data encoding systems may also result in data compression, such as gzip. References |
| Ingress Tool Transfer | Adversaries may transfer tools or other files from an external system into a compromised environment. Tools or files may be copied from an external adversary-controlled system to the victim network through the command and control channel or through alternate protocols such as ftp. Once present, adversaries may also transfer/spread tools between victim devices within a compromised environment (i.e. Lateral Tool Transfer). On Windows, adversaries may use various utilities to download tools, such as Adversaries may also abuse installers and package managers, such as Files can also be transferred using various Web Services as well as native or otherwise present tools on the victim system.[4] In some cases, adversaries may be able to leverage services that sync between a web-based and an on-premises client, such as Dropbox or OneDrive, to transfer files onto victim systems. For example, by compromising a cloud account and logging into the service's web portal, an adversary may be able to trigger an automatic syncing process that transfers the file onto the victim's machine.[5] References
|
| Hide Infrastructure | Adversaries may manipulate network traffic in order to hide and evade detection of their C2 infrastructure. This can be accomplished by identifying and filtering traffic from defensive tools,[1] masking malicious domains to obfuscate the true destination from both automated scanning tools and security researchers,[2],[3],[4] and otherwise hiding malicious artifacts to delay discovery and prolong the effectiveness of adversary infrastructure that could otherwise be identified, blocked, or taken down entirely. C2 networks may include the use of Proxy or VPNs to disguise IP addresses, which can allow adversaries to blend in with normal network traffic and bypass conditional access policies or anti-abuse protections. For example, an adversary may use a virtual private cloud to spoof their IP address to closer align with a victim's IP address ranges. This may also bypass security measures relying on geolocation of the source IP address.[5],[6] Adversaries may also attempt to filter network traffic in order to evade defensive tools in numerous ways, including blocking/redirecting common incident responder or security appliance user agents.[7],[8] Filtering traffic based on IP and geo-fencing may also avoid automated sandboxing or researcher activity (i.e., Virtualization/Sandbox Evasion).[1],[7] Hiding C2 infrastructure may also be supported by Resource Development activities such as Acquire Infrastructure and Compromise Infrastructure. For example, using widely trusted hosting services or domains such as prominent URL shortening providers or marketing services for C2 networks may enable adversaries to present benign content that later redirects victims to malicious web pages or infrastructure once specific conditions are met.[9],[10] References
|
| Fallback Channels | Adversaries may use fallback or alternate communication channels if the primary channel is compromised or inaccessible in order to maintain reliable command and control and to avoid data transfer thresholds. |
| Commonly Used Port | This technique has been deprecated. Please use Non-Standard Port where appropriate. Adversaries may communicate over a commonly used port to bypass firewalls or network detection systems and to blend with normal network activity to avoid more detailed inspection. They may use commonly open ports such as
They may use the protocol associated with the port or a completely different protocol. For connections that occur internally within an enclave (such as those between a proxy or pivot node and other nodes), examples of common ports are
|
Kwistjonijiet marbuta
| Tip ta’ link | Kwistjoni |
|---|---|
| is related to | Tactics |
| is part of | Enterprise ATT&CK |
- MITREATTACK -
© 2026 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation. https://attack.mitre.org/
Terms of Use
LICENSE
The MITRE Corporation (MITRE) hereby grants you a non-exclusive, royalty-free license to use ATT&CK® for research, development, and commercial purposes. Any copy you make for such purposes is authorized provided that you reproduce MITRE's copyright designation and this license in any such copy.
"© 2026 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation."
DISCLAIMERS
MITRE does not claim ATT&CK enumerates all possibilities for the types of actions and behaviors documented as part of its adversary model and framework of techniques. Using the information contained within ATT&CK to address or cover full categories of techniques will not guarantee full defensive coverage as there may be undisclosed techniques or variations on existing techniques not documented by ATT&CK.
ALL DOCUMENTS AND THE INFORMATION CONTAINED THEREIN ARE PROVIDED ON AN "AS IS" BASIS AND THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE MITRE CORPORATION, ITS BOARD OF TRUSTEES, OFFICERS, AGENTS, AND EMPLOYEES, DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION THEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
See our FAQ for more information on how to use and represent the ATT&CK name.