+Network Security
---+Network Security Policy
---+Network Security Controls (NSC)
---+Boundary Protection
------+Limit Network Connections
------+External Telecommunications Services
------+Prevent Discovery of Internal Information
------+Direct Internet Access Restrictions
------+Prevent Unauthorized Exfiltration
------+Protocol Compliance Enforcement
------+Domain Name Verification
------+Bandwidth Control
------+Internet Address Denylisting
------+Certificate Denylisting
------+Content Disarm and Reconstruction (CDR)
------+Network Processing Rules For Personal Data (PD)
------+Split Tunneling
---+Data Flow Enforcement – Access Control Lists (ACLs)
------+Deny Traffic by Default & Allow Traffic by Exception
------+Human Reviews
---+Interconnection Security Agreements (ISAs)
------+External System Connections
------+Internal System Connections
---+Network Segmentation (macrosegmentation)
------+Security Management Subnets
---+Out-of-Band Channels
---+Separate Subnets To Isolate Functions
------+Sensitive / Regulated Data Enclave (Secure Zone)
------+Segregation From Enterprise Services
---+Network Device Plane Segmentation
---+Virtual Local Area Network (VLAN) Separation
---+Microsegmentation
---+Software Defined Networking (SDN)
---+Domain Name Service (DNS) Resolution
------+Architecture & Provisioning for Name / Address Resolution Service
------+Secure Name / Address Resolution Service (Recursive or Caching Resolver)
------+Domain Registrar Security
---+Zero Trust Architecture (ZTA)
---+Policy Decision Point (PDP)
---+Network Access Control (NAC)
---+DNS & Content Filtering
---+Authenticated Proxy
------+Route Internal Traffic to Proxy Servers
------+Route Privileged Network Access
---+Application Proxy
---+Visibility of Encrypted Communications
------+Content Check for Encrypted Data
---+Denial of Service (DoS) Protection
---+Guest Networks
---+Intranets
---+Wireless Networking
------+Wireless Networking Authentication & Encryption
------+Wireless Boundaries
---+Rogue Wireless Detection
---+Remote Access
------+Remote Access Pathways
------+Expeditious Remote Access Disconnect / Disable Capability
------+Remote Access Endpoint Security Validation
------+Remote Access Monitoring & Control
------+Remote Access Cryptographic Protections
------+Remote Access Privileged Commands & Sensitive Data Access
---+Work From Anywhere (WFA) - Telecommuting Security
---+Network Connection Termination
---+Session Integrity
---+Third-Party Remote Access Governance
---+Network Intrusion Detection / Prevention Systems (NIDS / NIPS)
---+Wireless Intrusion Detection / Prevention Systems (WIDS / WIPS) Deployment
---+Demilitarized Zones (DMZ)
---+Web Application Firewall (WAF)
---+Application Programming Interface (API) Security
---+API Gateway
---+Safeguarding Data Over Open Networks
---+Wireless Link Protection
---+Email Domain Reputation Protections
------+Domain-Based Message Authentication Reporting and Conformance (DMARC)
------+Sender Policy Framework (SPF)
------+Authenticated Received Chain (ARC)
------+Sender Denylisting
---+End-User Messaging Technologies
------+Electronic Messaging
------+Phishing & Spam Protection
------+Email Content Protections
------+Adaptive Email Protections
------+Email Labeling
------+User Digital Signatures for Outgoing Email
------+Encryption for Outgoing Email
------+User Threat Reporting
---+Cross Domain Solution (CDS)
------+Separate Subnet for Connecting to Different Security Domains
------+Cross Domain Authentication
------+Data Type Identifiers
------+Decomposition Into Policy-Related Subcomponents
------+Detection of Unsanctioned Information
---+Cross Domain Content Transfer
------+Isolation of System Components
------+Dynamic Isolation & Segregation (Sandboxing)
---+Host Containment
---+Resource Containment
---+Conceal / Randomize Communications
------+Object Security Attributes
------+Embedded Data Types
---+Metadata
------+Metadata Validation
---+Side Channel Attack Prevention
|
Network Security
Security, Compliance & Resilience (SCR) PrinciplesArchitect and implement defense-in-depth network protections that segment, restrict and monitor access to Technology Assets, Applications, Services and Data (TAASD).
Principle IntentOrganizations architect and operate security, compliance and resilience controls that protect the Confidentiality, Integrity, Availability and Safety (CIAS) of network infrastructure through segmentation, traffic control, secure connectivity and situational awareness of network activity.
1. Visão geral
| Título |
Norma |
|
Network Security Policy
|
Description
Mechanisms exist to establish a formal, documented network security policy that:
(1) Conveys executive management's intent;
(2) Provides organizational direction and expected behaviors;
(3) Is reviewed at least annually; and
(4) Is updated, as necessary, to adapt to evolving risks, threats and other changes that affect the organization.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Executive-approved written policy with documented annual review
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Executive-approved written policy with documented annual review
∙ Policy acknowledgement tracking (e.g., HR onboarding records)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management
∙ Documented annual policy review with version control
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management
∙ Policy governance committee with formal annual review and approval workflow
∙ Automated policy attestation and acknowledgement tracking
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Steering committee
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Enterprise GRC platform (e.g., Cyturus, Archer, MetricStream, ServiceNow IRM) for policy lifecycle management
∙ Automated policy attestation, exception tracking and change history
∙ Annual executive approval and board-level reporting
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Network Security Controls (NSC)
|
Description
Mechanisms exist to develop, govern & update procedures to facilitate the implementation of Network Security Controls (NSC).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Basic firewall (home router or free pfSense)
∙ Network security policy
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Small business firewall (e.g., Cisco Meraki, Fortinet FortiGate)
∙ Network security policy
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Next-gen firewall (NGFW)
∙ Network segmentation
∙ IDS/IPS
∙ Network security standards
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise NGFW (e.g., Palo Alto Networks, Fortinet)
∙ Network security program
∙ IDS/IPS
∙ NAC
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise NGFW with threat intelligence feeds
∙ Zero-trust network architecture
∙ SIEM integration
∙ NAC
∙ SD-WAN
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Administrative processes are used to configure boundary devices (e.g., firewalls and routers) to deny network traffic by default and allow network traffic by exception (e.g., deny all and permit by exception).
▪ Administrative processes enforce the use of human reviews for Access Control Lists (ACLs) and similar rulesets on a routine basis.
▪ Internet-facing technologies are governed no differently from internal network assets.
▪ Network communications containing sensitive/regulated data are protected using a cryptographic mechanism to prevent unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
▪ Wireless access is protected via secure authentication and encryption.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Network communications containing sensitive/regulated data use a cryptographic mechanism to prevent the unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to develop, govern & update procedures to facilitate the implementation of Network Security Controls (NSC).
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Boundary Protection
|
Description
Mechanisms exist to monitor and control communications at the external network boundary and at key internal boundaries within the network.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Firewall as boundary protection device
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Business-grade firewall (e.g., Cisco Meraki, pfSense)
∙ DMZ for public-facing services
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ NGFW boundary protection
∙ DMZ architecture
∙ IDS/IPS at perimeter
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise NGFW with IPS
∙ DMZ design
∙ Network segmentation
∙ Perimeter monitoring
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise perimeter security
∙ NGFW, IPS, DMZ
∙ Zero-trust perimeter
∙ Continuous boundary monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ SBC enforce network activity monitoring and control communications at the external network boundary and at key internal boundaries within the network.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to monitor and control communications at the external network boundary and at key internal boundaries within the network.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Data Flow Enforcement – Access Control Lists (ACLs)
|
Description
Mechanisms exist to implement and govern Access Control Lists (ACLs) to provide data flow enforcement that explicitly restrict network traffic to only what is authorized.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Access Control Lists (ACLs)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Access Control Lists (ACLs)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Access Control Lists (ACLs)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Access Control Lists (ACLs)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Access Control Lists (ACLs)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Administrative processes enforce the use of human reviews for Access Control Lists (ACLs) and similar rulesets on a routine basis.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to implement and govern Access Control Lists (ACLs) to provide data flow enforcement that explicitly restrict network traffic to only what is authorized.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
|
|
Interconnection Security Agreements (ISAs)
|
Description
Mechanisms exist to authorize connections from systems to other systems using Interconnection Security Agreements (ISAs), or similar methods, that document, for each interconnection:
(1) Interface characteristics;
(2) Security, compliance and resilience requirements; and;
(3) The nature of the information communicated.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Interconnection Security Agreement (ISA)
∙ Information Exchange Security Agreements (IESA)
∙ Memoranda of Understanding (MOU) / Agreement (MOA)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Interconnection Security Agreement (ISA)
∙ Information Exchange Security Agreements (IESA)
∙ Memoranda of Understanding (MOU) / Agreement (MOA)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Interconnection Security Agreement (ISA)
∙ Information Exchange Security Agreements (IESA)
∙ Memoranda of Understanding (MOU) / Agreement (MOA)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Interconnection Security Agreement (ISA)
∙ Information Exchange Security Agreements (IESA)
∙ Memoranda of Understanding (MOU) / Agreement (MOA)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Interconnection Security Agreement (ISA)
∙ Information Exchange Security Agreements (IESA)
∙ Memoranda of Understanding (MOU) / Agreement (MOA)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to authorize connections from systems to other systems using Interconnection Security Agreements (ISAs), or similar methods, that document, for each interconnection:
(1) Interface characteristics;
(2) Security, compliance and resilience requirements; and;
(3) The nature of the information communicated.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Network Segmentation (macrosegmentation)
|
Description
Mechanisms exist to implement network segmentation within network architectures to isolate Technology Assets, Applications and/or Services (TAAS) from other network resources.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Subnetting
∙ Virtual Local Area Network (VLAN)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Subnetting
∙ Virtual Local Area Network (VLAN)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Subnetting
∙ Virtual Local Area Network (VLAN)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Subnetting
∙ Virtual Local Area Network (VLAN)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Subnetting
∙ Virtual Local Area Network (VLAN)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Network segmentation exists to implement separate network addresses (e.g., different subnets) to connect TAASD in different security domains (e.g., sensitive/regulated data environments).
▪ IT and/or cybersecurity architects maintain a segmented development network to ensure a secure development environment.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to ensure network architecture utilizes network segmentation to isolate Technology Assets, Applications and/or Services (TAAS) to protect from other network resources.
Mechanisms exist to implement network segmentation within network architectures to isolate Technology Assets, Applications and/or Services (TAAS) from other network resources.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Out-of-Band Channels
|
Description
Mechanisms exist to utilize out-of-band channels for the electronic transmission of information and/or the physical shipment of system components or devices to authorized individuals.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Use a separate channel (e.g., phone call) for critical communications
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Out-of-band communication policy for critical operations
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal out-of-band channel for management and security communications
∙ OOB procedure
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Dedicated out-of-band management channel
∙ OOB network for critical operations
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise out-of-band management network (OOBM)
∙ Dedicated OOB access for critical systems
∙ Emergency communication protocols
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to utilize out-of-band channels for the electronic transmission of information and/or the physical shipment of system components or devices to authorized individuals.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Separate Subnets To Isolate Functions
|
Description
Mechanisms exist to implement physically or logically separate subnetworks to isolate organization-defined Technology Assets, Applications, Services and/or Data (TAASD).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Subnetting for basic functional isolation
∙ VLAN segmentation
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ VLAN-based subnet isolation
∙ Separate subnets for servers, workstations and IoT/OT
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Subnet-based micro-segmentation
∙ Firewall rules between functional subnets
∙ Network ACLs for inter-subnet traffic
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Network micro-segmentation
∙ Host-based firewall enforcement between subnets
∙ Zero Trust Network Architecture (ZTNA) between segments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise micro-segmentation platform (e.g., Illumio, Guardicore)
∙ Software-Defined Networking (SDN) for subnet isolation
∙ ZTNA platform for workload-to-workload access control
∙ Automated subnet policy enforcement
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Identification & Authentication (IAC) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IAC domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with IAC domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IAC domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Identity & Access Management (IAM)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines) to enforce Logical Access Control (LAC).
▪ IAM may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel to implement Role Based Access Control (RBAC) practices for the management of user, group and system accounts, including privileged accounts.
▪ A directory services technology is used to centrally manage identities and permissions with RBAC. Due to technical or business limitations, asset/process owners are empowered to operate a decentralized access control program for their specific Technology Assets, Applications and/or Services (TAAS) that cannot be integrated into directory services.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to implement physically or logically separate subnetworks to isolate organization-defined Technology Assets, Applications, Services and/or Data (TAASD).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Network Device Plane Segmentation
|
Description
Automated mechanisms exist to separate network appliance functions (e.g., management, control and data planes) to prevent ordinary traffic from accessing functions that:
(1) Manage network appliances; and/or
(2) Affect network operations.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Management VLAN for network device administration
∙ Out-of-band management interface for network devices
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Management VLAN for network device administration
∙ Restrict management access to jump server
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Dedicated out-of-band management network
∙ Separate control plane and data plane configuration
∙ Management VLAN with strict ACLs
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Dedicated out-of-band management network (OOB)
∙ Software-defined networking (SDN) with plane separation
∙ Management plane protection with strict ACLs
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Dedicated OOB management network infrastructure
∙ SDN platform with automated plane segmentation
∙ Management plane micro-segmentation
∙ Automated configuration enforcement
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Identification & Authentication (IAC) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IAC domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with IAC domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IAC domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Identity & Access Management (IAM)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines) to enforce Logical Access Control (LAC).
▪ IAM may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel to implement Role Based Access Control (RBAC) practices for the management of user, group and system accounts, including privileged accounts.
▪ A directory services technology is used to centrally manage identities and permissions with RBAC. Due to technical or business limitations, asset/process owners are empowered to operate a decentralized access control program for their specific Technology Assets, Applications and/or Services (TAAS) that cannot be integrated into directory services.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Automated mechanisms exist to separate network appliance functions (e.g., management, control and data planes) to prevent ordinary traffic from accessing functions that:
(1) Manage network appliances; and/or
(2) Affect network operations.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Virtual Local Area Network (VLAN) Separation
|
Description
Mechanisms exist to enable Virtual Local Area Networks (VLANs) to limit the ability of devices on a network to directly communicate with other devices on the subnet and limit an attacker's ability to laterally move to compromise neighboring systems.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Virtual Local Area Network (VLAN)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Virtual Local Area Network (VLAN)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Virtual Local Area Network (VLAN)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Virtual Local Area Network (VLAN)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Virtual Local Area Network (VLAN)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ IT and/or cybersecurity personnel enable Virtual Local Area Networks (VLANs) to limit the ability of devices on a network to directly communicate with other devices on the subnet and limit an attacker's ability to laterally move to compromise neighboring systems
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to enable Virtual Local Area Networks (VLANs) to limit the ability of devices on a network to directly communicate with other devices on the subnet and limit an attacker's ability to laterally move to compromise neighboring systems.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Microsegmentation
|
Description
Automated mechanisms exist to enable microsegmentation, either physically or virtually, to divide the network according to application and data workflows communications needs.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size; host-based firewalls enabled on all devices
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Host-based firewall policies and VLAN segmentation as a precursor to microsegmentation
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Plan for microsegmentation as network matures
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Microsegmentation for high-risk workloads (e.g., VMware NSX)
∙ Segmentation policy
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise microsegmentation platform (e.g., Illumio, VMware NSX)
∙ Application-level micro-perimeters
∙ Zero-trust workload access
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically enable microsegmentation, either physically or virtually, to divide the network according to application and data workflows communications needs.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Software Defined Networking (SDN)
|
Description
Automated mechanisms exist to enable dynamic, policy-driven network segmentation, access controls and traffic management with a Software Defined Networking (SDN) architecture.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Note: Typically not required at this size; cloud-native network policies (security groups) where applicable
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Cloud-native SDN capabilities (e.g., AWS VPC, Azure Virtual Network) with policy-driven segmentation
∙ SDN planning for on-premises networks
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Software-defined networking (SDN) evaluation and planning
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise SDN platform (e.g., Cisco ACI, VMware NSX)
∙ Centralized network policy management
∙ Automated network provisioning
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically enable dynamic, policy-driven network segmentation, access controls and traffic management with a Software Defined Networking (SDN) architecture.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
|
|
Domain Name Service (DNS) Resolution
|
Description
Mechanisms exist to ensure Domain Name Service (DNS) resolution is designed, implemented and managed to protect the security of name / address resolution.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Secure Baseline Configurations (SBC)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Secure Baseline Configurations (SBC)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Secure Baseline Configurations (SBC)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Secure Baseline Configurations (SBC)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Secure Baseline Configurations (SBC)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ IT and/or cybersecurity personnel ensure Domain Name Service (DNS) resolution is designed, implemented and managed to protect the security of name / address resolution.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to ensure Domain Name Service (DNS) resolution is designed, implemented and managed to protect the security of name / address resolution.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Zero Trust Architecture (ZTA)
|
Description
Mechanisms exist to treat all users and devices as potential threats and prevent access to data and resources until the users can be properly authenticated and their access authorized.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Zero trust basics: MFA everywhere, device compliance checks, least privilege (e.g., Microsoft Entra Conditional Access)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Zero trust roadmap; identity-centric access with MFA and device compliance (e.g., Entra Conditional Access, Cloudflare Access)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Zero Trust Architecture (ZTA) planning and roadmap
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ ZTA implementation
∙ Identity-centric access controls
∙ Microsegmentation
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise ZTA platform (e.g., Zscaler, Palo Alto Prisma Access)
∙ Identity-based access
∙ Microsegmentation
∙ Continuous validation
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Administrative processes are used to configure boundary devices (e.g., firewalls and routers) to deny network traffic by default and allow network traffic by exception (e.g., deny all and permit by exception).
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to treat all users and devices as potential threats and prevent access to data and resources until the users can be properly authenticated and their access authorized.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Policy Decision Point (PDP)
|
Description
Automated mechanisms exist to evaluate access requests against established criteria to dynamically and uniformly enforce access rights and permissions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size; identity provider conditional access policies act as the policy decision point
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Conditional access policies in identity provider and firewall as policy decision points
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Document policy decision points for network access control
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Policy Decision Point (PDP) implemented in firewall/NAC
∙ Access policy centralization
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise PDP implementation (e.g., XACML, Zero Trust policy engine)
∙ Centralized access policy management
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically evaluate access requests against established criteria to dynamically and uniformly enforce access rights and permissions.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Network Access Control (NAC)
|
Description
Automated mechanisms exist to employ Network Access Control (NAC), or a similar technology, which is capable of detecting unauthorized devices and disable network access to those unauthorized devices.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ VLAN segmentation to isolate unknown devices
∙ Basic wireless network access controls
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ VLAN segmentation to isolate unknown devices
∙ MAC address filtering (basic NAC)
∙ Wireless access point policies
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Cisco Identity Services Engine (ISE) (https://cisco.com)
∙ HPE Aruba Central (https://arubanetworks.com)
∙ Juniper Mist Access Assurance (https://juniper.net)
∙ Open-source NAC (e.g., PacketFence)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Cisco Identity Services Engine (ISE) (https://cisco.com)
∙ HPE Aruba Central (https://arubanetworks.com)
∙ Juniper Mist Access Assurance (https://juniper.net)
∙ 802.1X certificate-based authentication
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Cisco Identity Services Engine (ISE) (https://cisco.com)
∙ HPE Aruba Central (https://arubanetworks.com)
∙ Juniper Mist Access Assurance (https://juniper.net)
∙ Zero Trust Network Architecture (ZTNA) integration
∙ 802.1X with EAP-TLS and certificate infrastructure
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically employ Network Access Control (NAC), or a similar technology, which is capable of detecting unauthorized devices and disable network access to those unauthorized devices.
Level 4 Quantitatively Controlled
Asset Management (AST) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
DNS & Content Filtering
|
Description
Mechanisms exist to force Internet-bound network traffic through a proxy device (e.g., Policy Enforcement Point (PEP)) for URL content filtering and DNS filtering to limit a user's ability to connect to dangerous or prohibited Internet sites.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Secure Baseline Configurations (SBC)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Secure Baseline Configurations (SBC)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Secure Baseline Configurations (SBC)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Secure Baseline Configurations (SBC)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Secure Baseline Configurations (SBC)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ SBC enforce Internet-bound network traffic routing through a proxy device for URL content filtering to limit a user's ability to connect to prohibited content.
▪ Content filtering blocks users from performing ad hoc file transfers through unapproved file transfer services (e.g., Box, Dropbox and Google Drive).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to force Internet-bound network traffic through a proxy device (e.g., Policy Enforcement Point (PEP)) for URL content filtering and DNS filtering to limit a user's ability to connect to dangerous or prohibited Internet sites.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
|
|
Authenticated Proxy
|
Description
Mechanisms exist to force systems and processes to authenticate Internet-bound traffic with a proxy to enable user, group and/or location-aware security controls.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size; DNS filtering with user identification (e.g., Cisco Umbrella, Cloudflare Gateway)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Cloud secure web gateway with user authentication (e.g., Cloudflare Gateway, Cisco Umbrella, Zscaler)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Authenticated proxy for sensitive network access
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise authenticated proxy with user-level access controls
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise authenticated proxy platform (e.g., Zscaler, Bluecoat)
∙ User-level policy enforcement
∙ SSO integration
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to force systems and processes to authenticate Internet-bound traffic with a proxy to enable user, group and/or location-aware security controls.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Application Proxy
|
Description
Mechanisms exist to terminate, inspect, control and reinitiate application traffic, regardless of the user's location or the security posture of the surrounding network.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ DNS/web filtering service (e.g., Cisco Umbrella, Cloudflare Gateway)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Web proxy for internet-bound traffic
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Application proxy for internet-bound traffic (e.g., Squid)
∙ Proxy policy
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise proxy solution (e.g., Symantec ProxySG, Zscaler)
∙ Application-level inspection
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise Secure Web Gateway (SWG) (e.g., Zscaler, Netskope)
∙ Application proxy with TLS inspection
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to terminate, inspect, control and reinitiate application traffic, regardless of the user's location or the security posture of the surrounding network.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Visibility of Encrypted Communications
|
Description
Mechanisms exist to configure the proxy to make encrypted communications traffic visible to monitoring tools and mechanisms.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Enable TLS inspection on proxy/firewall if supported
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ TLS inspection on web proxy or NGFW
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ SSL/TLS inspection policy and implementation on SWG/NGFW
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise TLS inspection solution with privacy controls
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise SSL/TLS inspection platform (e.g., Zscaler, BlueCoat)
∙ Selective decryption policy
∙ Privacy compliance for inspection
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to configure the proxy to make encrypted communications traffic visible to monitoring tools and mechanisms.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Denial of Service (DoS) Protection
|
Description
Automated mechanisms exist to protect against or limit the effects of denial of service attacks.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Enable DDoS protection on ISP/hosting provider
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Cloud-based DDoS protection (e.g., Cloudflare free tier)
∙ ISP-level DDoS mitigation
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ DDoS protection service (e.g., Cloudflare, Akamai)
∙ Rate limiting
∙ Traffic scrubbing
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise DDoS protection (e.g., Cloudflare Enterprise, Akamai Prolexic)
∙ On-premises mitigation appliances
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise DDoS mitigation platform
∙ BGP-based scrubbing centers
∙ Always-on cloud DDoS protection
∙ On-prem + cloud hybrid protection
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Boundary protection technologies minimize the effect of Denial of Service (DoS) attacks against business-critical services.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically protect against or limit the effects of denial of service attacks.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Guest Networks
|
Description
Mechanisms exist to implement and manage a secure guest network.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Separate guest Wi-Fi network (available on most consumer routers)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Separate guest network with no access to internal resources
∙ Guest network policy
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Segregated guest network
∙ Captive portal
∙ Guest network access controls
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise guest network solution
∙ NAC enforcement
∙ Guest network monitoring
∙ VLAN segmentation
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise NAC with guest access management
∙ Sponsored guest access
∙ Guest network monitoring
∙ Automated provisioning/deprovisioning
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ IT and/or cybersecurity personnel implement and manage a secure guest network.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to implement and manage a secure guest network.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Intranets
|
Description
Mechanisms exist to establish trust relationships with other organizations owning, operating, and/or maintaining intranet systems, allowing authorized individuals to:
(1) Access the intranet from external Technology Assets, Applications and/or Services (TAAS); and
(2) Process, store, and/or transmit organization-controlled information using the external TAAS.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Password-protect internal network resources
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Intranet security policy
∙ Authentication for internal resources
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Intranet security standards
∙ Authentication controls
∙ Internal TLS
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise intranet security program
∙ SSO for intranet resources
∙ Internal TLS enforcement
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise intranet security framework
∙ Zero-trust for internal applications
∙ Internal PKI
∙ SSO integration
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to establish trust relationships with other organizations owning, operating, and/or maintaining intranet systems, allowing authorized individuals to:
(1) Access the intranet from external Technology Assets, Applications and/or Services (TAAS); and
(2) Process, store, and/or transmit organization-controlled information using the external TAAS.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Wireless Networking
|
Description
Mechanisms exist to control authorized wireless usage and monitor for unauthorized wireless access.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Secure Baseline Configurations (SBC)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Secure Baseline Configurations (SBC)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Secure Baseline Configurations (SBC)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Secure Baseline Configurations (SBC)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Secure Baseline Configurations (SBC)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Wireless access is protected via secure authentication and encryption.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to control authorized wireless usage and monitor for unauthorized wireless access.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Rogue Wireless Detection
|
Description
Mechanisms exist to test for the presence of Wireless Access Points (WAPs) and identify all authorized and unauthorized WAPs within the facility(ies).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Periodically scan for rogue Wi-Fi access points
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Rogue wireless detection scans (e.g., NetStumbler, Kali Linux tools)
∙ Wireless security policy
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Wireless IDS for rogue AP detection
∙ Periodic wireless scanning
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise wireless IDS/IPS (e.g., Cisco, Aruba) with rogue detection
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise WIDS/WIPS with automated rogue AP detection and blocking (e.g., Cisco, Aruba, Juniper Mist)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to test for the presence of Wireless Access Points (WAPs) and identify all authorized and unauthorized WAPs within the facility(ies).
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
|
|
Remote Access
|
Description
Mechanisms exist to define, control and review organization-approved, secure remote access methods.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ VPN for remote access
∙ Remote access policy
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ VPN with MFA for remote access
∙ Documented remote access policy
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Enterprise VPN with MFA
∙ Remote access policy
∙ Split tunneling controls
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise VPN or ZTNA solution
∙ Remote access monitoring
∙ MFA enforcement
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise ZTNA/SASE platform (e.g., Zscaler, Palo Alto Prisma Access)
∙ VPN with MFA
∙ Remote access monitoring and logging
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to define, control and review organization-approved, secure remote access methods.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Work From Anywhere (WFA) - Telecommuting Security
|
Description
Mechanisms exist to define secure telecommuting practices and govern remote access to Technology Assets, Applications, Services and/or Data (TAASD) for remote workers.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Remote work security policy
∙ VPN requirement for home workers
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Work-from-anywhere security policy
∙ VPN + MFA for remote workers
∙ Acceptable use policy
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal WFA security program
∙ VPN/ZTNA + MFA
∙ Endpoint security for remote devices
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise WFA security program
∙ ZTNA/SASE solution
∙ Remote endpoint management (MDM/UEM)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise WFA security framework
∙ SASE platform (e.g., Zscaler, Netskope)
∙ UEM for remote endpoints
∙ Security awareness training for remote work
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to define secure telecommuting practices and govern remote access to TAASD for remote workers.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Network Connection Termination
|
Description
Mechanisms exist to terminate network connections at the end of a session or after an organization-defined time period of inactivity.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Configure session timeouts on systems and applications
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Session timeout policy
∙ Configure timeouts on all key systems
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal network session termination policy
∙ Automated session timeout enforcement
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise session management controls
∙ Automated disconnect for idle sessions
∙ Network access control enforcement
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise session management platform
∙ Automated session termination via NAC/IAM
∙ Zero-trust continuous session validation
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ SBC enforce network connection terminations at the end of a session or after an entity-defined time period of inactivity.
▪ SBC terminate remote sessions at the end of the session or after an entity-defined time period of inactivity.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to terminate network connections at the end of a session or after an organization-defined time period of inactivity.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
|
|
Session Integrity
|
Description
Mechanisms exist to protect the authenticity and integrity of communications sessions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Use HTTPS and ensure session cookies are secured
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Session management policy
∙ Enforce HTTPS
∙ Secure cookie attributes
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal session integrity controls
∙ HTTPS enforcement
∙ Session token management standards
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Web application session integrity controls
∙ WAF session protection
∙ Secure cookie policy enforcement
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise WAF (e.g., Imperva, Cloudflare)
∙ Application-level session integrity
∙ Token binding
∙ Zero-trust session validation
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to protect the authenticity and integrity of communications sessions.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Third-Party Remote Access Governance
|
Description
Mechanisms exist to proactively control and monitor third-party accounts used to access, support, or maintain system components via remote access.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Document and approve all third-party remote access
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Third-party remote access policy
∙ Require justification and time limits
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal third-party remote access governance policy
∙ Session monitoring requirements
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise third-party remote access governance
∙ PAM-managed third-party sessions
∙ Session recording
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise third-party remote access platform (e.g., BeyondTrust, CyberArk)
∙ Just-in-time access
∙ Session recording and monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to proactively control and monitor third-party accounts used to access, support, or maintain system components via remote access.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Network Intrusion Detection / Prevention Systems (NIDS / NIPS)
|
Description
Mechanisms exist to employ Network Intrusion Detection / Prevention Systems (NIDS/NIPS) to detect and/or prevent intrusions into the network.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Network Intrusion Detection System (NIDS)
∙ Network Intrusion Prevention Systems (NIPS)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Network Intrusion Detection System (NIDS)
∙ Network Intrusion Prevention Systems (NIPS)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Network Intrusion Detection System (NIDS)
∙ Network Intrusion Prevention Systems (NIPS)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Network Intrusion Detection System (NIDS)
∙ Network Intrusion Prevention Systems (NIPS)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Network Intrusion Detection System (NIDS)
∙ Network Intrusion Prevention Systems (NIPS)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to employ Network Intrusion Detection / Prevention Systems (NIDS/NIPS) to detect and/or prevent intrusions into the network.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Wireless Intrusion Detection / Prevention Systems (WIDS / WIPS) Deployment
|
Description
Mechanisms exist to utilize Wireless Intrusion Detection / Protection Systems (WIDS / WIPS) on wireless network segments.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Wireless Intrusion Detection System (WIDS)
∙ Wireless Intrusion Prevention Systems (WIPS)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Wireless Intrusion Detection System (WIDS)
∙ Wireless Intrusion Prevention Systems (WIPS)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Wireless Intrusion Detection System (WIDS)
∙ Wireless Intrusion Prevention Systems (WIPS)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Wireless Intrusion Detection System (WIDS)
∙ Wireless Intrusion Prevention Systems (WIPS)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Wireless Intrusion Detection System (WIDS)
∙ Wireless Intrusion Prevention Systems (WIPS)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ IT and/or cybersecurity personnel receive feeds from Wireless Intrusion Detection / Protection Systems (WIDS / WIPS) to identify rogue wireless devices and to detect attack attempts via wireless networks.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to utilize Wireless Intrusion Detection / Protection Systems (WIDS / WIPS) on wireless network segments.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Demilitarized Zones (DMZ)
|
Description
Mechanisms exist to utilize a Demilitarized Zone (DMZ) to restrict inbound traffic to authorized Technology Assets, Applications and/or Services (TAAS) on certain services, protocols and ports.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Host internet-facing services in isolated network from internal systems
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ DMZ for internet-facing web services
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal DMZ architecture for web services
∙ Separation from internal network
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise DMZ design with WAF and IDS/IPS for web services
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise web architecture with DMZ
∙ WAF
∙ Reverse proxy
∙ Network segmentation
∙ DDoS protection
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Web Security (WEB) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with WEB domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Web management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Web Security (WEB) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with WEB domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with WEB domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with WEB domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Web security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Web security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to utilize a Demilitarized Zone (DMZ) to restrict inbound traffic to authorized Technology Assets, Applications and/or Services (TAAS) on certain services, protocols and ports.
Level 4 Quantitatively Controlled
Web Security (WEB) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Web Application Firewall (WAF)
|
Description
Mechanisms exist to deploy Web Application Firewalls (WAFs) to provide defense-in-depth protection for application-specific threats.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Keep website CMS and plugins updated
∙ Use HTTPS
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Web Application Firewall (WAF)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Web Application Firewall (WAF)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Web Application Firewall (WAF)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Web Application Firewall (WAF)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Web Security (WEB) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with WEB domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Web management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Web Security (WEB) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with WEB domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with WEB domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with WEB domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Web security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Web security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to deploy Web Application Firewalls (WAFs) to provide defense-in-depth protection for application-specific threats.
Level 4 Quantitatively Controlled
Web Security (WEB) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Application Programming Interface (API) Security
|
Description
Mechanisms exist to ensure support for secure interoperability between components with Application Programming Interfaces (APIs).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Use HTTPS and API keys/OAuth for any APIs; follow OWASP API Security Top 10
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ API security standard (authentication, TLS, input validation)
∙ API inventory
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ API security requirements in SSDP (OAuth 2.0/OIDC, rate limiting, schema validation)
∙ API inventory and documentation (OpenAPI)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ API security platform (e.g., Salt Security, Noname, 42Crunch)
∙ API gateway enforcement
∙ API security testing in CI/CD
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise API security program (inventory, gateway enforcement, runtime protection, testing)
∙ API security platform (e.g., Salt, Noname, Akamai API Security)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Cloud Security (CLD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CLD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CLD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CLD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Cloud management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Cloud management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Cloud-based Technology Assets, Applications and/or Services (TAAS) are governed according to the same processes used for on-premises TAAS, where no formal, dedicated cloud governance process exists.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to ensure support for secure interoperability between components with Application Programming Interfaces (APIs).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
API Gateway
|
Description
Mechanisms exist to implement an Application Programming Interface (API) Gateway, or similar technology, to serve as a controlled entry point that manages interactions between client-facing requests and backend services.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size; cloud provider API gateway if APIs are exposed
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Cloud API gateway (e.g., AWS API Gateway, Azure API Management) for exposed APIs
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ API gateway as controlled entry point (e.g., Kong, Azure APIM, AWS API Gateway)
∙ Authentication, throttling and logging at the gateway
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise API gateway/management platform (e.g., Apigee, MuleSoft, Kong Enterprise)
∙ Centralized API policy enforcement
∙ WAF integration
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise API management with gateways across environments (e.g., Apigee, Kong, Azure APIM)
∙ Zero-trust API access
∙ API security analytics
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Cloud Security (CLD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with CLD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Cloud management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Cloud Security (CLD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CLD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CLD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CLD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Cloud management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Cloud management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Cloud-based Technology Assets, Applications and/or Services (TAAS) are governed according to the same processes used for on-premises TAAS, where no formal, dedicated cloud governance process exists.
▪ Cloud requirements for interoperability between components (APIs) are identified and documented.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to implement an Application Programming Interface (API) Gateway, or similar technology, to serve as a controlled entry point that manages interactions between client-facing requests and backend services.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Safeguarding Data Over Open Networks
|
Description
Cryptographic mechanisms exist to implement strong cryptography and security protocols to safeguard sensitive and/or regulated data during transmission over open, public networks.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Use HTTPS/TLS for all internet-facing communications
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ TLS for all internet traffic
∙ No unencrypted protocols over public networks
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Encryption-in-transit standards
∙ TLS 1.2+ enforcement
∙ Certificate management
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise encryption-in-transit program
∙ TLS 1.3 enforcement
∙ Certificate lifecycle management
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise encryption governance program
∙ TLS 1.3+
∙ Certificate management platform (e.g., Venafi)
∙ Automated certificate monitoring
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Network communications containing sensitive/regulated data are protected using a cryptographic mechanism to prevent unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
▪ Wireless access is protected via secure authentication and encryption.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Network communications containing sensitive/regulated data use a cryptographic mechanism to prevent the unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational cryptographic capability exists to implement strong cryptography and security protocols to safeguard sensitive/regulated data during transmission over open, public networks.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Wireless Link Protection
|
Description
Mechanisms exist to protect external and internal wireless links from signal parameter attacks through monitoring for unauthorized wireless connections, including scanning for unauthorized wireless access points and taking appropriate action, if an unauthorized connection is discovered.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Use WPA2/WPA3 encryption on all Wi-Fi networks
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ WPA3 Wi-Fi encryption
∙ Wireless security policy
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Enterprise wireless security standard
∙ WPA3-Enterprise
∙ 802.1X authentication
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise wireless security (WPA3-Enterprise + 802.1X)
∙ Wireless IDS/IPS
∙ RF monitoring
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise WLAN security platform
∙ WPA3-Enterprise with RADIUS
∙ Wireless IDS/IPS (e.g., Cisco Wireless, Aruba)
∙ RF scanning
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Network communications containing sensitive/regulated data are protected using a cryptographic mechanism to prevent unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
▪ Wireless access is protected via secure authentication and encryption.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ Network communications containing sensitive/regulated data use a cryptographic mechanism to prevent the unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to protect external and internal wireless links from signal parameter attacks through monitoring for unauthorized wireless connections, including scanning for unauthorized wireless access points and taking appropriate action, if an unauthorized connection is discovered.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Email Domain Reputation Protections
|
Description
Mechanisms exist to monitor the organization's email domain's reputation and protect the email domain's reputation.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Configure SPF record for email domain
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ SPF, DKIM, DMARC configuration for email domain
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Email domain reputation controls: SPF, DKIM, DMARC
∙ Reputation monitoring
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise email authentication (SPF, DKIM, DMARC)
∙ Domain reputation monitoring
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise email authentication program
∙ SPF, DKIM, DMARC enforcement
∙ Automated reputation monitoring
∙ BIMI implementation
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to monitor the organization's email domain's reputation and protect the email domain's reputation.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
End-User Messaging Technologies
|
Description
Mechanisms exist to prohibit the transmission of unprotected sensitive and/or regulated data by end-user messaging technologies.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Acceptable Use Policy (AUP)
∙ Data Loss Prevention (DLP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Acceptable Use Policy (AUP)
∙ Data Loss Prevention (DLP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Acceptable Use Policy (AUP)
∙ Data Loss Prevention (DLP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Acceptable Use Policy (AUP)
∙ Data Loss Prevention (DLP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Acceptable Use Policy (AUP)
∙ Data Loss Prevention (DLP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Network communications containing sensitive/regulated data are protected using a cryptographic mechanism to prevent unauthorized disclosure of information while in transit (e.g., SSH, TLS and VPN).
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to prohibit the transmission of unprotected sensitive/regulated data by end-user messaging technologies.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Cross Domain Solution (CDS)
|
Description
Mechanisms exist to implement a Cross Domain Solution (CDS) to mitigate the specific security risks of accessing or transferring information between security domains.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Note: Typically not required at this size; document any data transfers between networks of different sensitivity
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Documented cross-domain solution policy
∙ Review data transfers between security domains
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Formal cross-domain solution (CDS) controls
∙ Data transfer approval process
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise CDS platform
∙ Hardware data diodes where applicable
∙ Formal CDS approval and monitoring program
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to implement a Cross Domain Solution (CDS) to mitigate the specific security risks of accessing or transferring information between security domains.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Cross Domain Content Transfer
|
Description
Automated mechanisms exist to examine information for the presence of unsanctioned information and prohibits the transfer of such information, when transferring information between different security domains.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Use only approved tools for network data transfer
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Approved network transfer tools list
∙ Policy prohibiting unapproved transfer methods
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Approved solutions list for cross-domain data transfer
∙ Policy enforcement at gateway
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Formal approved solutions program
∙ Gateway enforcement of approved transfer tools only
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise approved solutions program with technical enforcement
∙ CASB for cloud transfer control
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically examine information for the presence of unsanctioned information and prohibits the transfer of such information, when transferring information between different security domains.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
|
|
Host Containment
|
Description
Automated mechanisms exist to enforce host containment protections that revoke or quarantine a host's access to the network.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Isolate suspected compromised systems from the network immediately
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Host isolation procedure for incident response
∙ Documented steps to isolate compromised hosts
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal host containment policy and procedure
∙ EDR-based isolation capability
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ EDR with automated host isolation (e.g., CrowdStrike, SentinelOne)
∙ IR playbook for containment
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise EDR/XDR with automated host containment
∙ SOAR-orchestrated isolation workflows
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically enforce host containment protections that revoke or quarantine a host's access to the network.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Resource Containment
|
Description
Automated mechanisms exist to enforce resource containment protections that remove or quarantine a resource's access to other resources.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Isolate affected resources during security incidents
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Resource isolation procedure for incidents
∙ Shutdown/isolate procedures
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal resource containment policy
∙ Network-level isolation procedures
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Network-level resource containment capabilities
∙ Automated quarantine via NAC
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise SOAR with automated resource containment
∙ Network quarantine via NAC/SDN
∙ Automated threat response playbooks
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to automatically enforce resource containment protections that remove or quarantine a resource's access to other resources.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Conceal / Randomize Communications
|
Description
Cryptographic mechanisms exist to conceal or randomize communication patterns.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Note: Typically not required at this size
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Note: Typically not required at this size
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Note: Typically not required at this size; VPN/TLS encryption of all traffic
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Encrypted tunnels concealing traffic patterns (e.g., always-on VPN, encrypted DNS)
∙ Traffic padding where supported
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise traffic concealment/randomization for sensitive communications (padding, onion routing/anonymization, traffic flow confidentiality per NIST SP 800-53 SC-8)
∙ Encrypted DNS and always-on encrypted transport
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational cryptographic capability exists to conceal or randomize communication patterns.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Metadata
|
Description
Mechanisms exist to enforce information flow controls based on metadata.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Review metadata in files before sharing externally
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Policy requiring metadata review/stripping before external sharing
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Metadata scrubbing tools
∙ Policy for metadata controls on shared files
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise metadata management tools
∙ Automated metadata stripping for external sharing
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise metadata management and DLP platform
∙ Automated metadata classification and stripping
∙ DLP integration
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Network Security (NET) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with NET domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Network security-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
Level 2 Planned Tracked
Network Security (NET) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Network security-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Network security management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT personnel define secure networking practices to protect the Confidentiality, Integrity, Availability and Safety (CIAS) of the organization's TAASD.
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to enforce information flow controls based on metadata.
Level 4 Quantitatively Controlled
Network Security (NET) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
Side Channel Attack Prevention
|
Description
Mechanisms exist to prevent "side channel attacks" when using a Content Delivery Network (CDN) by restricting access to the origin server's IP address to the CDN and an authorized management network.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Secure Baseline Configurations (SBC)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Secure Baseline Configurations (SBC)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Secure Baseline Configurations (SBC)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Secure Baseline Configurations (SBC)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Secure Baseline Configurations (SBC)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Network Security (NET) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with NET domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with NET domain capabilities are well-documented and kept current by process owners.
▪ A network security management team, or similar function, is appropriately staffed and supported to implement and maintain NET domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of network security operations (e.g., network management solution and log aggregator).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with NET domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ Secure Baseline Configurations (SBC) enforce the principles of least privileges and least functionality for boundary protection technologies.
▪ An implemented and operational capability exists to prevent "side channel attacks" when using a Content Delivery Network (CDN) by restricting access to the origin server's IP address to the CDN and an authorized management network.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
1.1 Referências
1.2 Requisitos identificados
1.3 Regulamentos relacionados
2. Requisitos identificados
Requisitos
| Fonte |
Requisito |
3. Regulamentos relacionados
Regulamentos
| Fonte |
Regulamentação |
- Secure Controls Framework -
"The SCF is the Common Controls Framework™ (CCF), the world's most comprehensive cybersecurity and data privacy metaframework - it is also free to use. The entire concept is building secure, compliant and resilient capabilities in the most efficient and cost-effective manner possible.
The SCF is more than just a unified control catalog, since its included content creates a playbook for Governance, Risk & Compliance (GRC) capabilities. Used globally by organizations of every size, the SCF is a robust and scalable solution for security, compliance and resilience controls. As a comprehensive security framework, the SCF maps 1,400+ controls across 200+ laws, regulations, and industry frameworks so you can implement once and comply everywhere.
Like it or not, cybersecurity is a protracted war on an asymmetric battlefield, where the threats are everywhere and as defenders we have to make the effort to work together to help improve cybersecurity and data privacy practices, since we all suffer when massive data breaches occur or when cyber attacks have physical impacts. Hackers share information on attack methods with other hackers, so why shouldn’t the good guys share information on how to best protect an organization? We decided to take action and make a difference, since we feel it is too important to wait for someone else to fix the problems that exist.
The SCF is made up of volunteers, mainly specialists within the cybersecurity profession, who focus on GRC and the cybersecurity side of data privacy. These are auditors, engineers, architects, incident responders, consultants and other specialists who live and breathe these topics on a daily basis. The end product is "expert-derived content" that makes up the SCF." https://securecontrolsframework.com/
Terms & Conditions
The SCF End User License Agreement (EULA) governs the use of the Secure Controls Framework® (SCF) under the Creative Commons Attribution-No Derivatives 4.0 International Public License.
|