+Άρθρο 24 Συνιστώσες της πολιτικής επιχειρησιακής συνέχειας των ΤΠΕ
---+Άρθρο 24 1.
---+Άρθρο 24 2.
---+Άρθρο 24 3.
---+Άρθρο 24 4.

Άρθρο 24 Συνιστώσες της πολιτικής επιχειρησιακής συνέχειας των ΤΠΕ

1. Επισκόπηση

Τίτλος	Κανονισμός
Άρθρο 24 1.	Στην πολιτική επιχειρησιακής συνέχειας των ΤΠΕ που αναφέρεται στο άρθρο 11 παράγραφος 1 του κανονισμού (ΕΕ) 2022/2554, οι χρηματοοικονομικές οντότητες περιλαμβάνουν όλα τα ακόλουθα: α) περιγραφή: i) των στόχων της πολιτικής επιχειρησιακής συνέχειας των ΤΠΕ, συμπεριλαμβανομένης της διασύνδεσης των ΤΠΕ και της συνολικής επιχειρησιακής συνέχειας, και λαμβάνοντας υπόψη τα αποτελέσματα της ανάλυσης επιχειρηματικών επιπτώσεων (ΑΕΕ) που αναφέρεται στο άρθρο 11 παράγραφος 5 του κανονισμού (ΕΕ) 2022/2554· ii) του πεδίου εφαρμογής των ρυθμίσεων, των σχεδίων, των διαδικασιών και των μηχανισμών επιχειρησιακής συνέχειας των ΤΠΕ, συμπεριλαμβανομένων των περιορισμών και των εξαιρέσεων· iii) του χρονοδιαγράμματος που πρέπει να καλύπτεται από τις ρυθμίσεις, τα σχέδια, τις διαδικασίες και τους μηχανισμούς επιχειρησιακής συνέχειας των ΤΠΕ· iv) των κριτηρίων για την ενεργοποίηση και την απενεργοποίηση των σχεδίων επιχειρησιακής συνέχειας των ΤΠΕ, των σχεδίων αντιμετώπισης και ανάκαμψης της λειτουργίας των ΤΠΕ και των σχεδίων επικοινωνίας σε καταστάσεις κρίσης· β) διατάξεις σχετικά με: i) τη διακυβέρνηση και την οργάνωση για την εφαρμογή της πολιτικής επιχειρησιακής συνέχειας των ΤΠΕ, συμπεριλαμβανομένων των ρόλων, των αρμοδιοτήτων και των διαδικασιών παραπομπής συμβάντων που διασφαλίζουν τη διαθεσιμότητα επαρκών πόρων· ii) την ευθυγράμμιση μεταξύ των σχεδίων επιχειρησιακής συνέχειας των ΤΠΕ και των σχεδίων συνολικής επιχειρησιακής συνέχειας, όσον αφορά τουλάχιστον όλα τα ακόλουθα: 1) σενάρια πιθανών αστοχιών, συμπεριλαμβανομένων των σεναρίων που αναφέρονται στο άρθρο 26 παράγραφος 2 του παρόντος κανονισμού· 2) στόχους αποκατάστασης, διευκρινίζοντας ότι η χρηματοοικονομική οντότητα είναι σε θέση να αποκαταστήσει τις εργασίες των κρίσιμων ή σημαντικών λειτουργιών της μετά από διαταραχές σύμφωνα με τους στόχους ως προς τον χρόνο και το σημείο αποκατάστασης· iii) την ανάπτυξη σχεδίων επιχειρησιακής συνέχειας των ΤΠΕ για σοβαρές διαταραχές της επιχειρηματικής δραστηριότητας στο πλαίσιο των εν λόγω σχεδίων, και την ιεράρχηση των δράσεων επιχειρησιακής συνέχειας των ΤΠΕ με τη χρήση προσέγγισης βάσει κινδύνου· iv) την ανάπτυξη, τις δοκιμές και την επανεξέταση σχεδίων αντιμετώπισης και ανάκαμψης της λειτουργίας των ΤΠΕ, σύμφωνα με τα άρθρα 25 και 26 του παρόντος κανονισμού· v) την επανεξέταση της αποτελεσματικότητας των εφαρμοζόμενων ρυθμίσεων, σχεδίων, διαδικασιών και μηχανισμών επιχειρησιακής συνέχειας των ΤΠΕ, σύμφωνα με το άρθρο 26 του παρόντος κανονισμού· vi) την ευθυγράμμιση της πολιτικής επιχειρησιακής συνέχειας των ΤΠΕ με: 1) την πολιτική επικοινωνίας που αναφέρεται στο άρθρο 14 παράγραφος 2 του κανονισμού (ΕΕ) 2022/2554· 2) τις δράσεις επικοινωνίας και διαχείρισης κρίσεων που αναφέρονται στο άρθρο 11 παράγραφος 2 στοιχείο ε) του κανονισμού (ΕΕ) 2022/2554.
Άρθρο 24 2.	Παράλληλα με τις απαιτήσεις που αναφέρονται στην παράγραφο 1, οι κεντρικοί αντισυμβαλλόμενοι διασφαλίζουν ότι η οικεία πολιτική επιχειρησιακής συνέχειας των ΤΠΕ: α) περιέχει μέγιστο χρόνο αποκατάστασης για τις κρίσιμες λειτουργίες τους που δεν υπερβαίνει τις 2 ώρες· β) λαμβάνει υπόψη τις εξωτερικές συνδέσεις και αλληλεξαρτήσεις στο πλαίσιο των χρηματοοικονομικών υποδομών, συμπεριλαμβανομένων των τόπων διαπραγμάτευσης που εκκαθαρίζονται από τον κεντρικό αντισυμβαλλόμενο, των συστημάτων διακανονισμού τίτλων και πληρωμών, και των πιστωτικών ιδρυμάτων που χρησιμοποιούνται από τον κεντρικό αντισυμβαλλόμενο ή από συνδεδεμένο κεντρικό αντισυμβαλλόμενο· γ) ορίζει την εφαρμογή ρυθμίσεων για: i) να διασφαλίζεται η συνέχεια των κρίσιμων ή σημαντικών λειτουργιών του κεντρικού αντισυμβαλλομένου βάσει σεναρίων καταστροφής· ii) να διατηρείται δευτερεύων τόπος επεξεργασίας ικανός να διασφαλίζει τη συνέχεια των κρίσιμων ή σημαντικών λειτουργιών του κεντρικού αντισυμβαλλομένου, που είναι πανομοιότυπος με τον κύριο τόπο· iii) να διατηρείται ή να υπάρχει άμεση πρόσβαση σε δευτερεύοντα επιχειρησιακό χώρο, ώστε το προσωπικό να μπορεί να διασφαλίζει τη συνέχεια της υπηρεσίας, εάν δεν είναι διαθέσιμη η κύρια τοποθεσία της επιχείρησης· iv) να εξετάζεται η ανάγκη επιπρόσθετων τόπων επεξεργασίας, ιδίως όταν η ποικιλομορφία των προφίλ κινδύνου του κύριου και του δευτερεύοντος τόπου δεν ενισχύει επαρκώς την εμπιστοσύνη ότι οι στόχοι επιχειρησιακής συνέχειας του κεντρικού αντισυμβαλλομένου πληρούνται σε όλα τα σενάρια. Για τους σκοπούς του στοιχείου α), οι κεντρικοί αντισυμβαλλόμενοι ολοκληρώνουν τις διαδικασίες και τις πληρωμές στο τέλος της ημέρας κατά την απαιτούμενη ώρα και ημέρα υπό οποιεσδήποτε περιστάσεις. Για τους σκοπούς του στοιχείου γ) σημείο i), οι ρυθμίσεις που αναφέρονται στο εν λόγω στοιχείο αφορούν τη διαθεσιμότητα επαρκών ανθρώπινων πόρων, τον μέγιστο χρόνο διακοπής των κρίσιμων λειτουργιών, την εναλλακτική σύνδεση ή εφεδρεία και την ανάκτηση σε δευτερεύοντα τόπο. Για τους σκοπούς του στοιχείου γ) σημείο ii), ο δευτερεύων τόπος επεξεργασίας που αναφέρεται στο εν λόγω στοιχείο έχει γεωγραφικό προφίλ κινδύνου διαφορετικό από εκείνο του κύριου τόπου.
Άρθρο 24 3.	Παράλληλα με τις απαιτήσεις που αναφέρονται στην παράγραφο 1, τα κεντρικά αποθετήρια τίτλων διασφαλίζουν ότι η οικεία πολιτική επιχειρησιακής συνέχειας των ΤΠΕ: α) λαμβάνει υπόψη τυχόν συνδέσεις και αλληλεξαρτήσεις με χρήστες, παρόχους κρίσιμων υπηρεσιών κοινής ωφέλειας και κρίσιμων υπηρεσιών, άλλα κεντρικά αποθετήρια τίτλων και άλλες υποδομές αγορών· β) απαιτεί οι οικείες ρυθμίσεις επιχειρησιακής συνέχειας των ΤΠΕ να διασφαλίζουν ότι ο στόχος του χρόνου αποκατάστασης για τις κρίσιμες ή σημαντικές λειτουργίες τους δεν υπερβαίνει τις 2 ώρες.
Άρθρο 24 4.	Παράλληλα με τις απαιτήσεις που αναφέρονται στην παράγραφο 1, οι τόποι διαπραγμάτευσης διασφαλίζουν ότι η οικεία πολιτική επιχειρησιακής συνέχειας των ΤΠΕ διασφαλίζει ότι: α) οι συναλλαγές μπορούν να συνεχιστούν εντός 2 ωρών ή περίπου σε δύο ώρες από συμβάν δυσλειτουργίας· β) ο μέγιστος όγκος δεδομένων που μπορεί να απολεσθούν από οποιαδήποτε υπηρεσία ΤΠ του τόπου διαπραγμάτευσης μετά από οποιοδήποτε συμβάν δυσλειτουργίας είναι σχεδόν μηδενικός.

1.1 Παραπομπές

1.2 Εντοπισμένες απαιτήσεις

1.3 Σχετικά πρότυπα

2. Εντοπισμένες απαιτήσεις

Απαιτήσεις
Πηγή	Απαίτηση

3. Σχετικά πρότυπα

Πρότυπα
Πηγή	Απαίτηση
SCF	Identify Critical Assets Description Mechanisms exist to identify and document the critical Technology Assets, Applications, Services and/or Data (TAASD) that support essential missions and business functions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ Production TAASD support business-critical application and services failover. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners define Recovery Time Objectives (RTOs) for business-critical TAASD. ▪ Business stakeholders and process owners define Recovery Point Objectives (RPOs) for business-critical TAASD. Level 3 Well Defined Asset Management (AST) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with AST domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with AST domain capabilities are well-documented and kept current by process owners. ▪ An IT Asset Management (ITAM) team, or similar function, is appropriately staffed and supported to implement and maintain AST domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of ITAM operations (e.g., ITAM platform, (e.g., Configuration Management Database (CMBD) Asset Management solution). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with AST domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to identify and document the critical TAASD that support essential missions and business functions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery Policy Description Mechanisms exist to establish a formal, documented Business Continuity and Disaster Recovery (BC/DR) policy that: (1) Conveys executive management's intent; (2) Provides organizational direction and expected behaviors; (3) Is reviewed at least annually; and (4) Is updated, as necessary, to adapt to evolving risks, threats and other changes that affect the organization. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com) ∙ Executive-approved written policy with documented annual review Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com) ∙ Executive-approved written policy with documented annual review ∙ Policy acknowledgement tracking (e.g., HR onboarding records) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com) ∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management ∙ Documented annual policy review with version control Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com) ∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management ∙ Policy governance committee with formal annual review and approval workflow ∙ Automated policy attestation and acknowledgement tracking Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Steering committee ∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com) ∙ Enterprise GRC platform (e.g., Cyturus, Archer, MetricStream, ServiceNow IRM) for policy lifecycle management ∙ Automated policy attestation, exception tracking and change history ∙ Annual executive approval and board-level reporting SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity Management System (BCMS) Description Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during: (1) Routine operations; and (2) Adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Business Impact Analysis (BIA) ∙ Criticality assessments SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Continuity & Disaster Recovery (BC/DR) Plans Description Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Basic business continuity plan ∙ Regular data backup Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Business continuity plan ∙ Tested backup and restore procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Formal BCP/DRP program ∙ Regular backup testing ∙ Alternate processing capability Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Enterprise BCP/DRP program ∙ DR site ∙ Annual exercises ∙ RTO/RPO targets Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise) ∙ Dedicated DR site ∙ Automated failover ∙ Annual DR exercises SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Time / Point Objectives (RTO / RPO) Description Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Time / Point Objectives (RTO / RPO) Description Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Time / Point Objectives (RTO / RPO) Description Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Time / Point Objectives (RTO / RPO) Description Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Operations Criteria Description Mechanisms exist to define specific criteria that must be met to initiate Business Continuity / Disaster Recovery (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) ∙ Recovery Time Objectives (RTOs) ∙ Recovery Point Objectives (RPOs) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. ▪ Recovery Time Objectives (RTOs) and/or Recovery Point Objectives (RPOs) are not formally planned for or resourced to meet. Level 2 Planned Tracked SCR-CMM Level 2 criteria definitions are not available for this control: ▪ A reasonable person would conclude a well-defined and standardized process is required. ▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization. ▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts). Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to define specific criteria that must be met to initiate Business Continuity / Disaster Recover (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs). Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Recovery Operations Communications Description Mechanisms exist to communicate the status of recovery activities and progress in restoring operational capabilities to designated internal and external stakeholders. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ Within the BC/DR plans, alternate communications channels are defined if primary means of communication are unavailable. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to communicate the status of recovery activities and progress in restoring operational capabilities to designated internal and external stakeholders. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Ongoing Contingency Planning Description Mechanisms exist to update contingency plans due to changes affecting: (1) People (e.g., personnel changes); (2) Processes (e.g., new, altered or decommissioned business practices, including third-party services); (3) Technologies (e.g., new, altered or decommissioned technologies); (4) Data (e.g., changes to data flows and/or data repositories); (5) Facilities (e.g., new, altered or decommissioned physical infrastructure); and/or (6) Feedback from contingency plan testing activities. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Documentation change control Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Documentation change control Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Documentation change control Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Documentation change control Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Documentation change control SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Production TAASD support business-critical application and services failover. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure. ▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable. ▪ Within the BC/DR plans, alternate communications channels are defined if primary means of communication are unavailable. ▪ RTOs are used to identify business-critical TAASD, which are given priority of service in alternate processing and storage sites. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to update contingency plans due to changes affecting: (1) People (e.g., personnel changes); (2) Processes (e.g., new, altered or decommissioned business practices, including third-party services) (3) Technologies (e.g., new, altered or decommissioned technologies); (4) Data (e.g., changes to data flows and/or data repositories); (5) Facilities (e.g., new, altered or decommissioned physical infrastructure); and/or (6) Feedback from contingency plan testing activities. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Coordinate with Related Plans Description Mechanisms exist to coordinate contingency plan development with internal and external elements responsible for related plans. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Incident Response Plan (IRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Incident Response Plan (IRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Incident Response Plan (IRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Incident Response Plan (IRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Incident Response Plan (IRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to coordinate contingency plan development with internal and external elements responsible for related plans. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Coordinate with Related Plans Description Mechanisms exist to coordinate contingency plan development with internal and external elements responsible for related plans. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Incident Response Plan (IRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Incident Response Plan (IRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Incident Response Plan (IRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Incident Response Plan (IRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Incident Response Plan (IRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to coordinate contingency plan development with internal and external elements responsible for related plans. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Coordinate with Related Plans Description Mechanisms exist to coordinate contingency plan development with internal and external elements responsible for related plans. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Incident Response Plan (IRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Incident Response Plan (IRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Incident Response Plan (IRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Incident Response Plan (IRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Incident Response Plan (IRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to coordinate contingency plan development with internal and external elements responsible for related plans. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Coordinate With External Service Providers Description Mechanisms exist to coordinate internal contingency plans with those of external service providers to ensure that organizational resiliency requirements can be satisfied. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to coordinate internal contingency plans with the contingency plans of external service providers to ensure that contingency requirements can be satisfied. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Continue Essential Mission & Business Functions Description Mechanisms exist to continue essential missions and business functions with little or no loss of operational continuity and sustain that continuity until full system restoration of primary processing and/or storage sites is performed. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) ∙ Business Continuity Plan (BCP) ∙ Disaster Recovery Plan (DRP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs). ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective. ▪ Production TAASD support business-critical application and services failover. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD. ▪ Business stakeholders and process owners define Recovery Time Objectives (RTOs) for business-critical TAASD. ▪ Business stakeholders and process owners define Recovery Point Objectives (RPOs) for business-critical TAASD. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to continue essential missions and business functions with little or no loss of operational continuity and sustain that continuity until full system restoration at primary processing and/or storage sites. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Contingency Plan Testing & Exercises Description Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Tabletop exercises Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Tabletop exercises Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Tabletop exercises Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Tabletop exercises ∙ Simulated events Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Tabletop exercises ∙ Simulated events SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Contingency Plan Testing & Exercises Description Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Tabletop exercises Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Tabletop exercises Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Tabletop exercises Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Tabletop exercises ∙ Simulated events Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Tabletop exercises ∙ Simulated events SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan. Level 4 Quantitatively Controlled Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Alternate Processing Site Description Mechanisms exist to establish an alternate processing site that provides processing capability and security measures equivalent to that of the primary site. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud) ∙ Documented recovery procedures to cloud fallback Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud) ∙ Basic DR runbooks and cloud failover procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Cloud-based warm/hot site (AWS, Azure, GCP) ∙ Managed DR service (e.g., AWS Elastic Disaster Recovery, Azure Site Recovery) ∙ Documented and tested failover procedures Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ AWS Elastic Disaster Recovery or Azure Site Recovery ∙ Cloud-based or colocation alternate processing site ∙ Regular failover testing with documented RTO/RPO validation Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise DR platform with automated failover (e.g., Zerto, Veeam Replication, AWS DRS) ∙ Geographically separate alternate processing site (cloud or colocation) ∙ Regularly tested failover with RTO/RPO compliance verification ∙ NIST SP 800-34 contingency planning alignment SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to establish an alternate processing site that provides security measures equivalent to that of the primary site. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Alternate Processing Site Description Mechanisms exist to establish an alternate processing site that provides processing capability and security measures equivalent to that of the primary site. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud) ∙ Documented recovery procedures to cloud fallback Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud) ∙ Basic DR runbooks and cloud failover procedures Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Cloud-based warm/hot site (AWS, Azure, GCP) ∙ Managed DR service (e.g., AWS Elastic Disaster Recovery, Azure Site Recovery) ∙ Documented and tested failover procedures Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ AWS Elastic Disaster Recovery or Azure Site Recovery ∙ Cloud-based or colocation alternate processing site ∙ Regular failover testing with documented RTO/RPO validation Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Enterprise DR platform with automated failover (e.g., Zerto, Veeam Replication, AWS DRS) ∙ Geographically separate alternate processing site (cloud or colocation) ∙ Regularly tested failover with RTO/RPO compliance verification ∙ NIST SP 800-34 contingency planning alignment SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to establish an alternate processing site that provides security measures equivalent to that of the primary site. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Separation from Primary Processing Site Description Mechanisms exist to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Separation from Primary Processing Site Description Mechanisms exist to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Alternate Processing Site Accessibility Description Mechanisms exist to identify and mitigate potential accessibility problems to the alternate processing sites that would impact mitigation and recovery activities, in the event of an area-wide disruption or disaster. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Continuity of Operations Plan (COOP) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Continuity of Operations Plan (COOP) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Continuity of Operations Plan (COOP) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Continuity of Operations Plan (COOP) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Continuity of Operations Plan (COOP) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to identify and mitigate potential accessibility problems to the alternate processing sites and possible mitigation actions, in the event of an area-wide disruption or disaster. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Failover Capability Description Mechanisms exist to implement real-time or near-real-time failover capability to maintain availability of critical Technology Assets, Applications, Services and/or Data (TAASD). Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Load balancers ∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Load balancers ∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Load balancers ∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Load balancers ∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Load balancers ∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include: ▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation. ▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices. ▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power). ▪ Backups are performed ad-hoc and focus on business-critical Technology Assets, Applications, Services and/or Data (TAASD). ▪ IT and/or cybersecurity personnel use a backup methodology (e.g., grandfather and father & son rotation) to create backups to support business needs (e.g., Recovery Time Objectives). Level 2 Planned Tracked Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. Level 3 Well Defined Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners. ▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to implement real-time or near-real-time failover capability to maintain availability of critical TAASD. Level 4 Quantitatively Controlled Utilize SCR-CMM Level 3 criteria definitions: ▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control. ▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF	Business Impact Analysis (BIA) Description Mechanisms exist to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks. Possible Solutions & Considerations Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Small Business (10-49 staff) / BLS Firm Size Classes 3-4 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Medium Business (50-249 staff) / BLS Firm Size Classes 5-6 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Large Business (250-999 staff) / BLS Firm Size Classes 7-8 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) Enterprise (> 1,000 staff) / BLS Firm Size Class 9 ∙ Risk Management Program (RMP) ∙ Data Protection Impact Assessment (DPIA) ∙ Business Impact Analysis (BIA) SCR-CMM Level 0 Not Performed Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed. Level 1 Performed Informally SCR-CMM Level 1 criteria definitions are not available for this control: ▪ A reasonable person would conclude this control requires a structured process. ▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality. Level 2 Planned Tracked Risk Management (RSK) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity. ▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are documented and maintained by process owners. ▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD). ▪ Risk management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines). ▪ Risk management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel. ▪ Risk management processes (e.g., risk assessments) and technologies focus on protecting High Value Assets (HVAs), including environments where sensitive/regulated data is stored, transmitted and processed. ▪ IT and/or cybersecurity personnel implement and maintain a form of Risk Management Program (RMP) that provides operational guidance on how risk is identified, assessed, remediated and reported. ▪ Data/process owners are expected to self-manage risks associated with their systems, applications, services and data, based on the organization's published policies and standards, including the identification, remediation and reporting of risks. ▪ Business process owners (BPOs) are made aware of cybersecurity and data protection risk(s). Level 3 Well Defined Risk Management (RSK) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function. ▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are well-documented and kept current by process owners. ▪ A risk management team, or similar function, is appropriately staffed and supported to implement and maintain RSK domain capabilities. ▪ Technology is leveraged to enhance the efficiency and accuracy of risk management operations (e.g., risk management solution, GRC platform and TPRM tool). ▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls). ▪ An implemented and operational capability exists to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks. Level 4 Quantitatively Controlled Risk Management (RSK) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist: ▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational. ▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs). ▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs). ▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties. ▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review). ▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes. ▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities. Level 5 Continuously Improving Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions: ▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control. ▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies. ▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.

Builddate: 25.06.2024 00:00:00 -Doknr: CELEX:32024R1774
EULAW -
European Regulation published on http://eur-lex.europa.eu/

Άρθρο 24 Συνιστώσες της πολιτικής επιχειρησιακής συνέχειας των ΤΠΕ

1. Επισκόπηση

1.1 Παραπομπές

1.2 Εντοπισμένες απαιτήσεις

1.3 Σχετικά πρότυπα

2. Εντοπισμένες απαιτήσεις

3. Σχετικά πρότυπα

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

SCR-CMM

Level 0 Not Performed

Level 1 Performed Informally

Level 2 Planned Tracked

Level 3 Well Defined

Level 4 Quantitatively Controlled

Level 5 Continuously Improving

Description

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2