+Articolo 24 Componenti della politica di continuità operativa delle TIC
---+Articolo 24 1.
---+Articolo 24 2.
---+Articolo 24 3.
---+Articolo 24 4.
|
Articolo 24 Componenti della politica di continuità operativa delle TIC
-
1. Panoramica
| Titolo |
Regolamentazione |
|
Articolo 24 1.
|
Le entità finanziarie includono nella loro politica di continuità operativa delle TIC di cui all’articolo 11, paragrafo 1, del regolamento (UE) 2022/2554 tutti gli elementi seguenti:
a)
una descrizione:
i)
degli obiettivi della politica di continuità operativa delle TIC, compresa l’interrelazione tra le TIC e la continuità operativa complessiva, e tenendo conto dei risultati dell’analisi dell’impatto sulle attività aziendali (Business Impact Analysis, BIA) di cui all’articolo 11, paragrafo 5, del regolamento (UE) 2022/2554;
ii)
dell’ambito di applicazione degli accordi, dei piani, delle procedure e dei meccanismi di continuità operativa delle TIC, comprese le limitazioni e le esclusioni;
iii)
dell’arco di tempo che deve essere coperto dagli accordi, dai piani, dalle procedure e dai meccanismi di continuità operativa delle TIC;
iv)
dei criteri di attivazione e disattivazione dei piani di continuità operativa delle TIC, dei piani di risposta e ripristino relativi alle TIC e dei piani di comunicazione delle crisi;
b)
disposizioni in materia di:
i)
governance e organizzazione per l’attuazione della politica di continuità operativa delle TIC, compresi ruoli, responsabilità e procedure di attivazione dei livelli successivi di intervento, garantendo la disponibilità di risorse sufficienti;
ii)
allineamento tra i piani di continuità operativa delle TIC e i piani generali di continuità operativa, per quanto riguarda almeno tutti gli aspetti seguenti:
1)
i potenziali scenari di disfunzione, compresi gli scenari di cui all’articolo 26, paragrafo 2, del presente regolamento;
2)
gli obiettivi di ripristino, specificando che l’entità finanziaria è in grado di ripristinare l’operatività delle proprie funzioni essenziali o importanti dopo le perturbazioni rispettando un obiettivo in materia di tempi di ripristino e un obiettivo in materia di punti di ripristino;
iii)
l’elaborazione di piani di continuità operativa TIC per gravi perturbazioni dell’attività all’interno di tali piani, e la definizione delle priorità delle azioni di continuità operativa delle TIC utilizzando un approccio basato sul rischio;
iv)
l’elaborazione, il test e il riesame dei piani di risposta e ripristino relativi alle TIC, conformemente agli articoli 25 e 26 del presente regolamento;
v)
il riesame dell’efficacia degli accordi, dei piani, delle procedure e dei meccanismi di continuità operativa delle TIC attuati, conformemente all’articolo 26 del presente regolamento;
vi)
l’allineamento della politica di continuità operativa delle TIC rispetto a:
1)
la politica di comunicazione di cui all’articolo 14, paragrafo 2, del regolamento (UE) 2022/2554;
2)
le azioni di comunicazione e gestione delle crisi di cui all’articolo 11, paragrafo 2, lettera e), del regolamento (UE) 2022/2554.
|
|
Articolo 24 2.
|
Oltre ai requisiti di cui al paragrafo 1, le controparti centrali provvedono affinché la loro politica di continuità operativa delle TIC:
a)
preveda un tempo massimo di ripristino delle funzioni essenziali non superiore a due ore;
b)
tenga conto dei collegamenti esterni e delle interdipendenze all’interno delle infrastrutture finanziarie, comprese le sedi di negoziazione compensate dalla controparte centrale, i sistemi di pagamento e di regolamento titoli e gli enti creditizi utilizzati dalla controparte centrale o da una controparte centrale collegata;
c)
preveda la predisposizione di dispositivi per:
i)
garantire la continuità delle funzioni essenziali o importanti della controparte centrale sulla base di scenari catastrofici;
ii)
mantenere un sito secondario per il trattamento dati in grado di garantire la continuità delle funzioni essenziali o importanti della controparte centrale, identico al sito primario;
iii)
mantenere o avere accesso immediato a un sito operativo secondario, per consentire al personale di garantire la continuità del servizio in caso di indisponibilità del sito primario;
iv)
considerare la necessità di altri siti per il trattamento dati, in particolare se la diversità dei profili di rischio dei siti primari e secondari non garantisce sufficientemente che gli obiettivi di continuità operativa della controparte centrale saranno raggiunti in tutti gli scenari.
Ai fini della lettera a), le controparti centrali completano le procedure e i pagamenti di fine giornata all’ora e nel giorno richiesti in tutte le circostanze. Ai fini della lettera c), punto i), i dispositivi di cui a tale punto riguardano la disponibilità di risorse umane adeguate, il periodo massimo di inutilizzabilità delle funzioni essenziali e il passaggio e ripristino in un sito secondario. Ai fini della lettera c), punto ii), il sito secondario per il trattamento dati di cui alla suddetta lettera ha un profilo di rischio geografico distinto da quello del sito primario.
|
|
Articolo 24 3.
|
Oltre ai requisiti di cui al paragrafo 1, i depositari centrali di titoli provvedono affinché la loro politica di continuità operativa delle TIC:
a)
tenga conto di tutti i collegamenti e le interdipendenze con gli utenti, i fornitori di utenze critiche e di servizi critici, gli altri depositari centrali di titoli e altre infrastrutture di mercato;
b)
preveda che gli accordi in materia di continuità operativa delle TIC garantiscano che l’obiettivo di tempo di ripristino per le funzioni essenziali o importanti non sia superiore a due ore.
|
|
Articolo 24 4.
|
Oltre ai requisiti di cui al paragrafo 1, le sedi di negoziazione provvedono affinché la loro politica di continuità operativa delle TIC garantisca che:
a)
la negoziazione possa riprendere entro approssimativamente due ore dall’evento perturbatore;
b)
la quantità massima di dati che potrebbe essere persa dai servizi informatici della sede di negoziazione dopo un evento perturbatore sia prossima allo zero.
|
,
1.1 Riferimenti
1.2 Requisiti identificati
1.3 Standard correlati
2. Requisiti identificati
Requisiti
| Fonte |
Requisito |
3. Standard correlati
Standard
| Fonte |
Requisito |
|
SCF
|
Identify Critical Assets
Description
Mechanisms exist to identify and document the critical Technology Assets, Applications, Services and/or Data (TAASD) that support essential missions and business functions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ Production TAASD support business-critical application and services failover.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners define Recovery Time Objectives (RTOs) for business-critical TAASD.
▪ Business stakeholders and process owners define Recovery Point Objectives (RPOs) for business-critical TAASD.
Level 3 Well Defined
Asset Management (AST) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with AST domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with AST domain capabilities are well-documented and kept current by process owners.
▪ An IT Asset Management (ITAM) team, or similar function, is appropriately staffed and supported to implement and maintain AST domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of ITAM operations (e.g., ITAM platform, (e.g., Configuration Management Database (CMBD) Asset Management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with AST domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to identify and document the critical TAASD that support essential missions and business functions.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity & Disaster Recovery Policy
Description
Mechanisms exist to establish a formal, documented Business Continuity and Disaster Recovery (BC/DR) policy that:
(1) Conveys executive management's intent;
(2) Provides organizational direction and expected behaviors;
(3) Is reviewed at least annually; and
(4) Is updated, as necessary, to adapt to evolving risks, threats and other changes that affect the organization.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Executive-approved written policy with documented annual review
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Executive-approved written policy with documented annual review
∙ Policy acknowledgement tracking (e.g., HR onboarding records)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management
∙ Documented annual policy review with version control
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management
∙ Policy governance committee with formal annual review and approval workflow
∙ Automated policy attestation and acknowledgement tracking
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Steering committee
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Enterprise GRC platform (e.g., Cyturus, Archer, MetricStream, ServiceNow IRM) for policy lifecycle management
∙ Automated policy attestation, exception tracking and change history
∙ Annual executive approval and board-level reporting
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity Management System (BCMS)
Description
Mechanisms exist to operate a Business Continuity Management System (BCMS) to achieve resilient Technology Assets, Applications, Services and/or Data (TAASD) during:
(1) Routine operations; and
(2) Adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Business Impact Analysis (BIA)
∙ Criticality assessments
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of contingency planning controls to help ensure resilient Technology Assets, Applications and/or Services (TAAS) (e.g., Continuity of Operations Plan (COOP) or BC/DR playbooks).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity & Disaster Recovery (BC/DR) Plans
Description
Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Basic business continuity plan
∙ Regular data backup
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Business continuity plan
∙ Tested backup and restore procedures
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal BCP/DRP program
∙ Regular backup testing
∙ Alternate processing capability
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise BCP/DRP program
∙ DR site
∙ Annual exercises
∙ RTO/RPO targets
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise)
∙ Dedicated DR site
∙ Automated failover
∙ Annual DR exercises
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity & Disaster Recovery (BC/DR) Plans
Description
Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Basic business continuity plan
∙ Regular data backup
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Business continuity plan
∙ Tested backup and restore procedures
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal BCP/DRP program
∙ Regular backup testing
∙ Alternate processing capability
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise BCP/DRP program
∙ DR site
∙ Annual exercises
∙ RTO/RPO targets
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise)
∙ Dedicated DR site
∙ Automated failover
∙ Annual DR exercises
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Continuity & Disaster Recovery (BC/DR) Plans
Description
Mechanisms exist for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Basic business continuity plan
∙ Regular data backup
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Business continuity plan
∙ Tested backup and restore procedures
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Formal BCP/DRP program
∙ Regular backup testing
∙ Alternate processing capability
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Enterprise BCP/DRP program
∙ DR site
∙ Annual exercises
∙ RTO/RPO targets
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise BC/DR platform (e.g., Zerto, Veeam Enterprise)
∙ Dedicated DR site
∙ Automated failover
∙ Annual DR exercises
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to for process owners to establish and maintain formal Business Continuity & Disaster Recovery (BC/DR) plans to ensure information is detailed enough, accurate and representative of current operations in order to sustain and/or restore operations under adverse conditions.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Recovery Time / Point Objectives (RTO / RPO)
Description
Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Recovery Time / Point Objectives (RTO / RPO)
Description
Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Recovery Time / Point Objectives (RTO / RPO)
Description
Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Recovery Time / Point Objectives (RTO / RPO)
Description
Mechanisms exist to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate recovery operations in accordance with Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Recovery Operations Criteria
Description
Mechanisms exist to define specific criteria that must be met to initiate Business Continuity / Disaster Recovery (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
∙ Recovery Time Objectives (RTOs)
∙ Recovery Point Objectives (RPOs)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
▪ Recovery Time Objectives (RTOs) and/or Recovery Point Objectives (RPOs) are not formally planned for or resourced to meet.
Level 2 Planned Tracked
SCR-CMM Level 2 criteria definitions are not available for this control:
▪ A reasonable person would conclude a well-defined and standardized process is required.
▪ At this level of maturity, the “requirements-driven” nature of performing the control is focused on a localized and/or regionalized implementation, not uniform and consistent across the organization.
▪ Requirements are narrowly scoped for applicability and are primarily derived from compliance obligations (e.g., laws, regulations and contracts).
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to define specific criteria that must be met to initiate Business Continuity / Disaster Recover (BC/DR) plans that facilitate business continuity operations capable of meeting applicable Recovery Time Objectives (RTOs) and Recovery Point Objectives (RPOs).
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Recovery Operations Communications
Description
Mechanisms exist to communicate the status of recovery activities and progress in restoring operational capabilities to designated internal and external stakeholders.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ Within the BC/DR plans, alternate communications channels are defined if primary means of communication are unavailable.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to communicate the status of recovery activities and progress in restoring operational capabilities to designated internal and external stakeholders.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Ongoing Contingency Planning
Description
Mechanisms exist to update contingency plans due to changes affecting:
(1) People (e.g., personnel changes);
(2) Processes (e.g., new, altered or decommissioned business practices, including third-party services);
(3) Technologies (e.g., new, altered or decommissioned technologies);
(4) Data (e.g., changes to data flows and/or data repositories);
(5) Facilities (e.g., new, altered or decommissioned physical infrastructure); and/or
(6) Feedback from contingency plan testing activities.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Documentation change control
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Documentation change control
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Documentation change control
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Documentation change control
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Documentation change control
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Production TAASD support business-critical application and services failover.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Data/process owners conduct a Business Impact Analysis (BIA) at least annually, or after any major technology or process change, to identify TAASD that are critical to the business, as well as single points of failure.
▪ Business stakeholders and process owners designate alternative decision-makers if primary decision-makers are unavailable.
▪ Within the BC/DR plans, alternate communications channels are defined if primary means of communication are unavailable.
▪ RTOs are used to identify business-critical TAASD, which are given priority of service in alternate processing and storage sites.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to update contingency plans due to changes affecting:
(1) People (e.g., personnel changes);
(2) Processes (e.g., new, altered or decommissioned business practices, including third-party services)
(3) Technologies (e.g., new, altered or decommissioned technologies);
(4) Data (e.g., changes to data flows and/or data repositories);
(5) Facilities (e.g., new, altered or decommissioned physical infrastructure); and/or
(6) Feedback from contingency plan testing activities.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Coordinate with Related Plans
Description
Mechanisms exist to coordinate contingency plan development with internal and external elements responsible for related plans.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Incident Response Plan (IRP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Incident Response Plan (IRP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Incident Response Plan (IRP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Incident Response Plan (IRP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Incident Response Plan (IRP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to coordinate contingency plan development with internal and external elements responsible for related plans.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Coordinate with Related Plans
Description
Mechanisms exist to coordinate contingency plan development with internal and external elements responsible for related plans.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Incident Response Plan (IRP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Incident Response Plan (IRP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Incident Response Plan (IRP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Incident Response Plan (IRP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Incident Response Plan (IRP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to coordinate contingency plan development with internal and external elements responsible for related plans.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Coordinate with Related Plans
Description
Mechanisms exist to coordinate contingency plan development with internal and external elements responsible for related plans.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Incident Response Plan (IRP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Incident Response Plan (IRP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Incident Response Plan (IRP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Incident Response Plan (IRP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Incident Response Plan (IRP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to coordinate contingency plan development with internal and external elements responsible for related plans.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Coordinate With External Service Providers
Description
Mechanisms exist to coordinate internal contingency plans with those of external service providers to ensure that organizational resiliency requirements can be satisfied.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to coordinate internal contingency plans with the contingency plans of external service providers to ensure that contingency requirements can be satisfied.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Continue Essential Mission & Business Functions
Description
Mechanisms exist to continue essential missions and business functions with little or no loss of operational continuity and sustain that continuity until full system restoration of primary processing and/or storage sites is performed.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
∙ Business Continuity Plan (BCP)
∙ Disaster Recovery Plan (DRP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Business stakeholders and process owners identify business-critical TAASD and External Service Providers (ESPs).
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to identify single points of failure from a TAASD perspective.
▪ Production TAASD support business-critical application and services failover.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to develop BC/DR plans to recover business-critical TAASD.
▪ Business stakeholders and process owners define Recovery Time Objectives (RTOs) for business-critical TAASD.
▪ Business stakeholders and process owners define Recovery Point Objectives (RPOs) for business-critical TAASD.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to continue essential missions and business functions with little or no loss of operational continuity and sustain that continuity until full system restoration at primary processing and/or storage sites.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Contingency Plan Testing & Exercises
Description
Mechanisms exist to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Tabletop exercises
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Tabletop exercises
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Tabletop exercises
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Tabletop exercises
∙ Simulated events
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Tabletop exercises
∙ Simulated events
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ IT and/or cybersecurity personnel develop limited Disaster Recovery Plans (DRP) to recover business-critical Technology Assets, Applications and/or Services (TAAS) and services.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct tests and/or exercises to evaluate the contingency plan's effectiveness and the organization's readiness to execute the plan.
Level 4 Quantitatively Controlled
Business Continuity & Disaster Recovery (BCD) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Alternate Processing Site
Description
Mechanisms exist to establish an alternate processing site that provides processing capability and security measures equivalent to that of the primary site.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud)
∙ Documented recovery procedures to cloud fallback
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud)
∙ Basic DR runbooks and cloud failover procedures
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Cloud-based warm/hot site (AWS, Azure, GCP)
∙ Managed DR service (e.g., AWS Elastic Disaster Recovery, Azure Site Recovery)
∙ Documented and tested failover procedures
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ AWS Elastic Disaster Recovery or Azure Site Recovery
∙ Cloud-based or colocation alternate processing site
∙ Regular failover testing with documented RTO/RPO validation
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise DR platform with automated failover (e.g., Zerto, Veeam Replication, AWS DRS)
∙ Geographically separate alternate processing site (cloud or colocation)
∙ Regularly tested failover with RTO/RPO compliance verification
∙ NIST SP 800-34 contingency planning alignment
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to establish an alternate processing site that provides security measures equivalent to that of the primary site.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Alternate Processing Site
Description
Mechanisms exist to establish an alternate processing site that provides processing capability and security measures equivalent to that of the primary site.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud)
∙ Documented recovery procedures to cloud fallback
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Cloud-based alternate processing (AWS, Azure, or Google Cloud)
∙ Basic DR runbooks and cloud failover procedures
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Cloud-based warm/hot site (AWS, Azure, GCP)
∙ Managed DR service (e.g., AWS Elastic Disaster Recovery, Azure Site Recovery)
∙ Documented and tested failover procedures
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ AWS Elastic Disaster Recovery or Azure Site Recovery
∙ Cloud-based or colocation alternate processing site
∙ Regular failover testing with documented RTO/RPO validation
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Enterprise DR platform with automated failover (e.g., Zerto, Veeam Replication, AWS DRS)
∙ Geographically separate alternate processing site (cloud or colocation)
∙ Regularly tested failover with RTO/RPO compliance verification
∙ NIST SP 800-34 contingency planning alignment
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to establish an alternate processing site that provides security measures equivalent to that of the primary site.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Separation from Primary Processing Site
Description
Mechanisms exist to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Separation from Primary Processing Site
Description
Mechanisms exist to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to separate the alternate processing site from the primary processing site to reduce susceptibility to similar threats.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Alternate Processing Site Accessibility
Description
Mechanisms exist to identify and mitigate potential accessibility problems to the alternate processing sites that would impact mitigation and recovery activities, in the event of an area-wide disruption or disaster.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Continuity of Operations Plan (COOP)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Continuity of Operations Plan (COOP)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Continuity of Operations Plan (COOP)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Continuity of Operations Plan (COOP)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Continuity of Operations Plan (COOP)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to identify and mitigate potential accessibility problems to the alternate processing sites and possible mitigation actions, in the event of an area-wide disruption or disaster.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Failover Capability
Description
Mechanisms exist to implement real-time or near-real-time failover capability to maintain availability of critical Technology Assets, Applications, Services and/or Data (TAASD).
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Load balancers
∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Load balancers
∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Load balancers
∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Load balancers
∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Load balancers
∙ High Availability (HA) network appliances (e.g., firewalls, routers, switches, etc.)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
Business Continuity & Disaster Recovery (BCD) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with BCD domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Contingency management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ Limited technologies exist to support near real-time network infrastructure failover (e.g., redundant ISPs and redundant power).
▪ Backups are performed ad-hoc and focus on business-critical Technology Assets, Applications, Services and/or Data (TAASD).
▪ IT and/or cybersecurity personnel use a backup methodology (e.g., grandfather and father & son rotation) to create backups to support business needs (e.g., Recovery Time Objectives).
Level 2 Planned Tracked
Business Continuity & Disaster Recovery (BCD) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Business Continuity / Disaster Recovery (BC/DR)-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ BC/DR may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
Level 3 Well Defined
Business Continuity & Disaster Recovery (BCD) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with BCD domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with BCD domain capabilities are well-documented and kept current by process owners.
▪ A Business Continuity & Disaster Recovery (BC/DR) team, or similar function, is appropriately staffed and supported to implement and maintain BCD domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of BC/DR operations (e.g., BC/DR planning software, Disaster Recovery as a Service (DRaaS), Orchestration and Automation Tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with BCD domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to implement real-time or near-real-time failover capability to maintain availability of critical TAASD.
Level 4 Quantitatively Controlled
Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|
SCF
|
Business Impact Analysis (BIA)
Description
Mechanisms exist to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks.
Possible Solutions & Considerations
Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Small Business (10-49 staff) / BLS Firm Size Classes 3-4
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Medium Business (50-249 staff) / BLS Firm Size Classes 5-6
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Large Business (250-999 staff) / BLS Firm Size Classes 7-8
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
Enterprise (> 1,000 staff) / BLS Firm Size Class 9
∙ Risk Management Program (RMP)
∙ Data Protection Impact Assessment (DPIA)
∙ Business Impact Analysis (BIA)
SCR-CMM
Level 0 Not Performed
Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.
Level 1 Performed Informally
SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.
Level 2 Planned Tracked
Risk Management (RSK) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Risk management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Risk management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Risk management processes (e.g., risk assessments) and technologies focus on protecting High Value Assets (HVAs), including environments where sensitive/regulated data is stored, transmitted and processed.
▪ IT and/or cybersecurity personnel implement and maintain a form of Risk Management Program (RMP) that provides operational guidance on how risk is identified, assessed, remediated and reported.
▪ Data/process owners are expected to self-manage risks associated with their systems, applications, services and data, based on the organization's published policies and standards, including the identification, remediation and reporting of risks.
▪ Business process owners (BPOs) are made aware of cybersecurity and data protection risk(s).
Level 3 Well Defined
Risk Management (RSK) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with RSK domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with RSK domain capabilities are well-documented and kept current by process owners.
▪ A risk management team, or similar function, is appropriately staffed and supported to implement and maintain RSK domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of risk management operations (e.g., risk management solution, GRC platform and TPRM tool).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with RSK domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to conduct a Business Impact Analysis (BIA) to identify and assess security, compliance and resilience risks.
Level 4 Quantitatively Controlled
Risk Management (RSK) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.
Level 5 Continuously Improving
Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
|
|