+Članak 54. Ovlašteni zastupnici dobavljača UI modelâ opće namjene
---+Članak 54. 1.
---+Članak 54. 2.
---+Članak 54. 3.
---+Članak 54. 4.
---+Članak 54. 5.
---+Članak 54. 6.

Članak 54. Ovlašteni zastupnici dobavljača UI modelâ opće namjene

-

1. Pregled

,
Članak 54. 1.
Prije stavljanja UI modelâ opće namjene na tržište Unije dobavljači s poslovnim nastanom u trećim zemljama pisanim ovlaštenjem imenuju ovlaštenog zastupnika s poslovnim nastanom Uniji.
Članak 54. 2.
Dobavljač omogućuje svojem ovlaštenom zastupniku da obavlja zadaće navedene u ovlaštenju koje je dobio od dobavljača.
Članak 54. 3.

Ovlašteni zastupnik obavlja zadaće navedene u ovlaštenju koje je dobio od dobavljača. On dostavlja primjerak ovlaštenja Uredu za umjetnu inteligenciju na njegov zahtjev, na jednom od službenih jezika institucija Unije. Za potrebe ove Uredbe ovlaštenjem se ovlaštenom zastupniku daje ovlast da obavlja sljedeće zadaće:

(a) 

provjerava je li tehnička dokumentacija iz Priloga XI. sastavljena i je li dobavljač ispunio sve obveze iz članka 53. i, ako je primjenjivo, članka 55.;

(b) 

drži primjerak tehničke dokumentacije iz Priloga XI. na raspolaganju Uredu za umjetnu inteligenciju i nacionalnim nadležnim tijelima tijekom razdoblja od deset godina nakon stavljanja UI modela opće namjene na tržište i čuva kontaktne podatke dobavljača koji je imenovao ovlaštenog zastupnika;

(c) 

Uredu za umjetnu inteligenciju na obrazloženi zahtjev dostavlja sve informacije i dokumentaciju, uključujući one iz točke (b), koji su potrebni za dokazivanje ispunjavanja obveza iz ovog poglavlja;

(d) 

na obrazloženi zahtjev surađuje s Uredom za umjetnu inteligenciju i nadležnim tijelima u svim mjerama koje oni poduzimaju u vezi s UI modelom opće namjene, među ostalim onda kada je model integriran u UI sustave koji se stavljaju na tržište ili u upotrebu u Uniji.
Članak 54. 4.
Ovlaštenjem se ovlaštenog zastupnika ovlašćuje da, uz dobavljača ili umjesto dobavljaču, bude osoba kojoj se obraćaju Ured za umjetnu inteligenciju ili nadležna tijela u vezi sa svim pitanjima povezanima s osiguravanjem usklađenosti s ovom Uredbom.
Članak 54. 5.
Ovlašteni zastupnik ukida ovlaštenje ako smatra ili ima razloga smatrati da dobavljač postupa protivno svojim obvezama na temelju ove Uredbe. U tom slučaju ovlašteni zastupnik o ukidanju ovlaštenja i razlozima za ukidanje ujedno odmah obavješćuje Ured za umjetnu inteligenciju.
Članak 54. 6.
Obveza utvrđena u ovom članku ne primjenjuje se na dobavljače UI modela opće namjene koji se objavljuju na temelju besplatne licencije otvorenog koda koja omogućuje pristup modelu te njegovu upotrebu, izmjenu i distribuciju i čiji su parametri, uključujući težinske faktore, informacije o arhitekturi modela te informacije o upotrebi modela, javno dostupni, osim ako UI modeli opće namjene predstavljaju sistemske rizike.

1.1 Reference

1.2 Utvrđeni zahtjevi

1.3 Povezani standardi

2. Utvrđeni zahtjevi

Zahtjevi

3. Povezani standardi

Standardi
SCF Localized Representation

Description

Mechanisms exist to appoint localized representation with a physical presence in the host country, as required by applicable laws and/or regulations.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Document applicable regulatory requirements in a checklist

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Compliance checklist
∙ Annual compliance review

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.

Level 3 Well Defined

Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to appoint localized representation with a physical presence in localities, as required by applicable laws and/or regulations.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Representative Powers

Description

Mechanisms exist to contract localized representation to perform specified functions in regard to representing statutory and/or regulatory compliance matters in the host country.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Document applicable regulatory requirements in a checklist

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Compliance checklist
∙ Annual compliance review

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.

Level 3 Well Defined

Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to contract localized representation to perform specified functions in regard to representing statutory and/or regulatory compliance matters.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Representative Powers

Description

Mechanisms exist to contract localized representation to perform specified functions in regard to representing statutory and/or regulatory compliance matters in the host country.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Document applicable regulatory requirements in a checklist

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Compliance checklist
∙ Annual compliance review

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.

Level 3 Well Defined

Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to contract localized representation to perform specified functions in regard to representing statutory and/or regulatory compliance matters.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Representative Powers

Description

Mechanisms exist to contract localized representation to perform specified functions in regard to representing statutory and/or regulatory compliance matters in the host country.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Document applicable regulatory requirements in a checklist

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Compliance checklist
∙ Annual compliance review

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Compliance management program
∙ Regulatory mapping
∙ Compliance calendar

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Compliance team

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.)
∙ Dedicated compliance team
∙ Automated compliance monitoring

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Compliance (CPL) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Compliance management controls-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Compliance management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ External compliance requirements for cybersecurity and data privacy are identified and documented, based on applicable laws, regulations and contractual obligations.

Level 3 Well Defined

Compliance (CPL) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with CPL domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with CPL domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain CPL domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of governance, risk management and compliance operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with CPL domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to contract localized representation to perform specified functions in regard to representing statutory and/or regulatory compliance matters.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.