+Articolul 17 Procedurile de evaluare a conformității
---+Article 17 1.
---+Article 17 2.
---+Article 17 3.
---+Article 17 4.

Articolul 17 Procedurile de evaluare a conformității

1. Prezentare generală

Titlu	Reglementare
Article 17 1.	The manufacturer shall perform a conformity assessment of the radio equipment with a view to meeting the essential requirements set out in Article 3. The conformity assessment shall take into account all intended operating conditions and, for the essential requirement set out in point (a) of Article 3(1), the assessment shall also take into account the reasonably foreseeable conditions. Where the radio equipment is capable of taking different configurations, the conformity assessment shall confirm whether the radio equipment meets the essential requirements set out in Article 3 in all possible configurations.
Article 17 2.	Manufacturers shall demonstrate compliance of radio equipment with the essential requirements set out in ►M2 Article 3(1) and (4) ◄ using any of the following conformity assessment procedures: (a) internal production control set out in Annex II; (b) EU-type examination that is followed by the conformity to type based on internal production control set out in Annex III; (c) conformity based on full quality assurance set out in Annex IV.
Article 17 3.	Where, in assessing the compliance of radio equipment with the essential requirements set out in Article 3(2) and (3), the manufacturer has applied harmonised standards the references of which have been published in the Official Journal of the European Union, he shall use any of the following procedures: (a) internal production control set out in Annex II; (b) EU-type examination that is followed by the conformity to type based on internal production control set out in Annex III; (c) conformity based on full quality assurance set out in Annex IV.
Article 17 4.	Where, in assessing the compliance of radio equipment with the essential requirements set out in Article 3(2) and (3), the manufacturer has not applied or has applied only in part harmonised standards the references of which have been published in the Official Journal of the European Union, or where such harmonised standards do not exist, radio equipment shall be submitted with regard to those essential requirements to either of the following procedures: (a) EU-type examination that is followed by the conformity to type based on internal production control set out in Annex III; (b) conformity based on full quality assurance set out in Annex IV.

1.1 Referințe

1.2 Cerințe identificate

1.3 Standarde asociate

2. Cerințe identificate

Cerințe
Sursă	Cerință

3. Standarde asociate

Standarde
Sursă	Cerință

Builddate: 30.05.2026 00:00:00 -Doknr: CELEX:32014L0053
EULAW -
EN: Legal acts of the European Union from EUR-Lex, https://eur-lex.europa.eu/. © European Union. Re-use is authorised by Decision 2011/833/EU, provided the source is acknowledged; the consolidated texts are licensed under CC BY 4.0 (EUR-Lex legal notice). Divided into sections and converted into the GRCA format, the wording unchanged. Only the legislation published in the Official Journal of the European Union is deemed authentic.

DE: Rechtsakte der Europäischen Union aus EUR-Lex, https://eur-lex.europa.eu/. © Europäische Union. Weiterverwendung nach Beschluss 2011/833/EU mit Quellenangabe gestattet; die konsolidierten Fassungen stehen unter CC BY 4.0 (Rechtlicher Hinweis von EUR-Lex). In Abschnitte aufgeteilt und in das GRCA-Format umgewandelt, der Wortlaut unverändert. Verbindlich sind allein die im Amtsblatt der Europäischen Union veröffentlichten Rechtsakte.