+Articolul 14 Obligațiile de raportare ale producătorilor
---+Article 14 1.
---+Article 14 2.
---+Article 14 3.
---+Article 14 4.
---+Article 14 5.
---+Article 14 6.
---+Article 14 7.
---+Article 14 8.
---+Article 14 9.
---+Article 14 10.

Articolul 14 Obligațiile de raportare ale producătorilor

1. Prezentare generală

,
Article 14 1.
A manufacturer shall notify any actively exploited vulnerability contained in the product with digital elements that it becomes aware of simultaneously to the CSIRT designated as coordinator, in accordance with paragraph 7 of this Article, and to ENISA. The manufacturer shall notify that actively exploited vulnerability via the single reporting platform established pursuant to Article 16.
Article 14 2.

For the purposes of the notification referred to in paragraph 1, the manufacturer shall submit:

(a) 

an early warning notification of an actively exploited vulnerability, without undue delay and in any event within 24 hours of the manufacturer becoming aware of it, indicating, where applicable, the Member States on the territory of which the manufacturer is aware that their product with digital elements has been made available;

(b) 

unless the relevant information has already been provided, a vulnerability notification, without undue delay and in any event within 72 hours of the manufacturer becoming aware of the actively exploited vulnerability, which shall provide general information, as available, about the product with digital elements concerned, the general nature of the exploit and of the vulnerability concerned as well as any corrective or mitigating measures taken, and corrective or mitigating measures that users can take, and which shall also indicate, where applicable, how sensitive the manufacturer considers the notified information to be;

(c) 

unless the relevant information has already been provided, a final report, no later than 14 days after a corrective or mitigating measure is available, including at least the following:

(i) 

a description of the vulnerability, including its severity and impact;

(ii) 

where available, information concerning any malicious actor that has exploited or that is exploiting the vulnerability;

(iii) 

details about the security update or other corrective measures that have been made available to remedy the vulnerability.
Article 14 3.
A manufacturer shall notify any severe incident having an impact on the security of the product with digital elements that it becomes aware of simultaneously to the CSIRT designated as coordinator, in accordance with paragraph 7 of this Article, and to ENISA. The manufacturer shall notify that incident via the single reporting platform established pursuant to Article 16.
Article 14 4.

For the purposes of the notification referred to in paragraph 3, the manufacturer shall submit:

(a) 

an early warning notification of a severe incident having an impact on the security of the product with digital elements, without undue delay and in any event within 24 hours of the manufacturer becoming aware of it, including at least whether the incident is suspected of being caused by unlawful or malicious acts, which shall also indicate, where applicable, the Member States on the territory of which the manufacturer is aware that their product with digital elements has been made available;

(b) 

unless the relevant information has already been provided, an incident notification, without undue delay and in any event within 72 hours of the manufacturer becoming aware of the incident, which shall provide general information, where available, about the nature of the incident, an initial assessment of the incident, as well as any corrective or mitigating measures taken, and corrective or mitigating measures that users can take, and which shall also indicate, where applicable, how sensitive the manufacturer considers the notified information to be;

(c) 

unless the relevant information has already been provided, a final report, within one month after the submission of the incident notification under point (b), including at least the following:

(i) 

a detailed description of the incident, including its severity and impact;

(ii) 

the type of threat or root cause that is likely to have triggered the incident;

(iii) 

applied and ongoing mitigation measures.
Article 14 5.

For the purposes of paragraph 3, an incident having an impact on the security of the product with digital elements shall be considered to be severe where:

(a) 

it negatively affects or is capable of negatively affecting the ability of a product with digital elements to protect the availability, authenticity, integrity or confidentiality of sensitive or important data or functions; or

(b) 

it has led or is capable of leading to the introduction or execution of malicious code in a product with digital elements or in the network and information systems of a user of the product with digital elements.
Article 14 6.
Where necessary, the CSIRT designated as coordinator initially receiving the notification may request manufacturers to provide an intermediate report on relevant status updates about the actively exploited vulnerability or severe incident having an impact on the security of the product with digital elements.
Article 14 7.
The notifications referred to in paragraphs 1 and 3 of this Article shall be submitted via the single reporting platform referred to in Article 16 using one of the electronic notification end-points referred to in Article 16(1). The notification shall be submitted using the electronic notification end-point of the CSIRT designated as coordinator of the Member State where the manufacturers have their main establishment in the Union and shall be simultaneously accessible to ENISA.

For the purposes of this Regulation, a manufacturer shall be considered to have its main establishment in the Union in the Member State where the decisions related to the cybersecurity of its products with digital elements are predominantly taken. If such a Member State cannot be determined, the main establishment shall be considered to be in the Member State where the manufacturer concerned has the establishment with the highest number of employees in the Union.

Where a manufacturer has no main establishment in the Union, it shall submit the notifications referred to in paragraphs 1 and 3 using the electronic notification end-point of the CSIRT designated as coordinator in the Member State determined pursuant to the following order and based on the information available to the manufacturer:

(a) 

the Member State in which the authorised representative acting on behalf of the manufacturer for the highest number of products with digital elements of that manufacturer is established;

(b) 

the Member State in which the importer placing on the market the highest number of products with digital elements of that manufacturer is established;

(c) 

the Member State in which the distributor making available on the market the highest number of products with digital elements of that manufacturer is established;

(d) 

the Member State in which the highest number of users of products with digital elements of that manufacturer are located.

In relation to the third subparagraph, point (d), a manufacturer may submit notifications related to any subsequent actively exploited vulnerability or severe incident having an impact on the security of the product with digital elements to the same CSIRT designated as coordinator to which it first reported.
Article 14 8.
After becoming aware of an actively exploited vulnerability or a severe incident having an impact on the security of the product with digital elements, the manufacturer shall inform the impacted users of the product with digital elements, and where appropriate all users, of that vulnerability or incident and, where necessary, of any risk mitigation and corrective measures that the users can deploy to mitigate the impact of that vulnerability or incident, where appropriate in a structured, machine-readable format that is easily automatically processable. Where the manufacturer fails to inform the users of the product with digital elements in a timely manner, the notified CSIRTs designated as coordinators may provide such information to the users when considered to be proportionate and necessary for preventing or mitigating the impact of that vulnerability or incident.
Article 14 9.
By 11 December 2025, the Commission shall adopt delegated acts in accordance with Article 61 of this Regulation to supplement this Regulation by specifying the terms and conditions for applying the cybersecurity-related grounds in relation to delaying the dissemination of notifications as referred to in Article 16(2) of this Regulation. The Commission shall cooperate with the CSIRTs network established pursuant to Article 15 of Directive (EU) 2022/2555 and ENISA in preparing the draft delegated acts.
Article 14 10.
The Commission may, by means of implementing acts, specify further the format and procedures of the notifications referred to in this Article as well as in Articles 15 and 16. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 62(2). The Commission shall cooperate with the CSIRTs network and ENISA in preparing those draft implementing acts.

1.1 Referințe

1.2 Cerințe identificate

1.3 Standarde asociate

2. Cerințe identificate

Cerințe

3. Standarde asociate

Standarde
SCF Incident Classification & Prioritization

Description

Mechanisms exist to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Incident Stakeholder Reporting

Description

Mechanisms exist to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Basic incident response plan
∙ Designate incident response contact

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Documented incident response plan
∙ Incident log
∙ Designated IR team

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Formal incident response program
∙ IR playbooks
∙ Tabletop exercises

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Enterprise incident response program
∙ 24/7 SOC monitoring
∙ SOAR platform

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise SOC with SIEM/SOAR (e.g., Splunk SOAR, Palo Alto XSOAR)
∙ IR retainer
∙ Threat hunting

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Level 4 Quantitatively Controlled

Incident Response (IRO) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Cyber Incident Reporting for Sensitive / Regulated Data

Description

Mechanisms exist to report sensitive and/or regulated data incidents in a timely manner.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Incident Response Plan (IRP)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Incident Response Plan (IRP)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Incident Response (IRO) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with IRO domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Incident response-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ IT and/or cybersecurity personnel use an informal process to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to report sensitive/regulated data incidents in a timely manner.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Incident Classification & Prioritization

Description

Mechanisms exist to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Incident Stakeholder Reporting

Description

Mechanisms exist to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Basic incident response plan
∙ Designate incident response contact

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Documented incident response plan
∙ Incident log
∙ Designated IR team

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Formal incident response program
∙ IR playbooks
∙ Tabletop exercises

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Enterprise incident response program
∙ 24/7 SOC monitoring
∙ SOAR platform

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise SOC with SIEM/SOAR (e.g., Splunk SOAR, Palo Alto XSOAR)
∙ IR retainer
∙ Threat hunting

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Level 4 Quantitatively Controlled

Incident Response (IRO) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Cyber Incident Reporting for Sensitive / Regulated Data

Description

Mechanisms exist to report sensitive and/or regulated data incidents in a timely manner.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Incident Response Plan (IRP)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Incident Response Plan (IRP)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Incident Response (IRO) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with IRO domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Incident response-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ IT and/or cybersecurity personnel use an informal process to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to report sensitive/regulated data incidents in a timely manner.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Disclosure of Vulnerabilities

Description

Mechanisms exist to disclose information about vulnerabilities to relevant stakeholders, including:
(1) A description of the vulnerability(ies);
(2) Affected product(s) and/or service(s);
(3) Potential impact of the vulnerability(ies);
(4) Severity of the vulnerability(ies); and
(5) Guidance to remediate the vulnerability(ies).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Notify customers of vulnerabilities in any developed products via email/website

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Security advisory template and distribution process
∙ security.txt / contact for vulnerability reports

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Vulnerability disclosure process with advisories (description, impact, remediation)
∙ Coordinated disclosure timelines

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product Security Incident Response Team (PSIRT) disclosure process (ISO/IEC 29147)
∙ CVE issuance for product vulnerabilities
∙ Customer notification channels

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise coordinated vulnerability disclosure program (ISO/IEC 29147, CNA participation)
∙ Public advisory portal and machine-readable advisories (CSAF)
∙ Regulatory notification (e.g., EU CRA) integration

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to disclose information about vulnerabilities to relevant stakeholders, including:
(1) A description of the vulnerability(ies);
(2) Affected product(s) and/or service(s);
(3) Potential impact of the vulnerability(ies);
(4) Severity of the vulnerability(ies); and
(5) Guidance to remediate the vulnerability(ies).

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.