+Artículo 14 Obligaciones de información de los fabricantes
---+Artículo 14 1.
---+Artículo 14 2.
---+Artículo 14 3.
---+Artículo 14 4.
---+Artículo 14 5.
---+Artículo 14 6.
---+Artículo 14 7.
---+Artículo 14 8.
---+Artículo 14 9.
---+Artículo 14 10.

Artículo 14 Obligaciones de información de los fabricantes

-

1. Resumen

,
Artículo 14 1.
Los fabricantes notificarán simultáneamente al CSIRT designado como coordinador, de conformidad con el apartado 7 del presente artículo, y a la ENISA cualquier vulnerabilidad aprovechada activamente presente en el producto con elementos digitales de la que tengan conocimiento. El fabricante notificará dicha vulnerabilidad aprovechada activamente a través de la plataforma única de notificación establecida en virtud del artículo 16.
Artículo 14 2.

A efectos de la notificación a que se refiere el apartado 1, el fabricante presentará:

a) 

una notificación de alerta temprana de la vulnerabilidad aprovechada activamente, sin demora indebida y, en todo caso, en un plazo de veinticuatro horas desde que el fabricante haya tenido conocimiento de ella, que indique, cuando proceda, los Estados miembros en cuyo territorio el fabricante tenga conocimiento de que se ha comercializado su producto con elementos digitales;

b) 

a menos que ya se haya facilitado la información pertinente, una notificación de la vulnerabilidad, sin demora indebida y, en todo caso, en un plazo de setenta y dos horas a partir del momento en que el fabricante haya tenido conocimiento de la vulnerabilidad aprovechada activamente, que proporcionará la información general disponible sobre el producto con elementos digitales en cuestión, la naturaleza general de la vulnerabilidad en cuestión y el modo en que es aprovechada, así como sobre las medidas correctoras o paliativas adoptadas y las medidas correctoras o paliativas que los usuarios pueden adoptar, y que también indicará, cuando proceda, en qué medida el fabricante considera sensible la información notificada;

c) 

a menos que ya se haya facilitado la información pertinente, un informe final, a más tardar catorce días después de que se disponga de una medida correctora o paliativa, que incluya, como mínimo, lo siguiente:

i) 

una descripción de la vulnerabilidad, que incluya su gravedad y sus repercusiones,

ii) 

cuando se disponga de ella, información relativa a cualquier agente malintencionado que haya aprovechado o esté aprovechando la vulnerabilidad,

iii) 

detalles sobre la actualización de seguridad u otras medidas correctoras disponibles para subsanar la vulnerabilidad.
Artículo 14 3.
Los fabricantes notificarán simultáneamente al CSIRT designado como coordinador, de conformidad con el apartado 7 del presente artículo, y a la ENISA cualquier incidente grave que repercuta en la seguridad de un producto con elementos digitales del que tengan conocimiento. El fabricante notificará dicho incidente a través de la plataforma única de notificación establecida en virtud del artículo 16.
Artículo 14 4.

A efectos de la notificación a que se refiere el apartado 3, el fabricante presentará:

a) 

una notificación de alerta temprana del incidente grave que repercute en la seguridad de un producto con elementos digitales, sin demora indebida y, en todo caso, en un plazo de veinticuatro horas desde que el fabricante haya tenido conocimiento de él, que indique como mínimo si se sospecha que el incidente se debe a actos ilegales o malintencionados y que también indicará, cuando proceda, los Estados miembros en cuyo territorio el fabricante tenga conocimiento de que se ha comercializado su producto con elementos digitales;

b) 

a menos que ya se haya facilitado la información pertinente, una notificación del incidente, sin demora indebida y, en todo caso, en un plazo de setenta y dos horas a partir del momento en que el fabricante haya tenido conocimiento del incidente, que proporcionará la información general disponible sobre la naturaleza del incidente, una evaluación inicial de este, así como información sobre las medidas correctoras o paliativas adoptadas y las medidas correctoras o paliativas que los usuarios pueden adoptar, y que también indicará, cuando proceda, hasta qué punto el fabricante considera sensible la información notificada;

c) 

a menos que ya se haya facilitado la información pertinente, un informe final, en el plazo de un mes después de presentar la notificación del incidente contemplada en la letra b), en el que se recojan al menos los siguientes elementos:

i) 

una descripción detallada del incidente, que incluya su gravedad y sus repercusiones,

ii) 

el tipo de amenaza o causa principal que probablemente haya desencadenado el incidente,

iii) 

las medidas paliativas aplicadas y en curso.
Artículo 14 5.

A efectos del apartado 3, un incidente que repercuta en la seguridad de un producto con elementos digitales se considerará grave cuando:

a) 

afecte o puede afectar negativamente a la capacidad de un producto con elementos digitales para proteger la disponibilidad, autenticidad, integridad o confidencialidad de datos o funciones sensibles o importantes, o

b) 

haya llevado o pueda llevar a la introducción o ejecución de código malicioso en un producto con elementos digitales o en la red y los sistemas de información de un usuario del producto con elementos digitales.
Artículo 14 6.
En caso necesario, el CSIRT designado como coordinador que reciba inicialmente la notificación podrá solicitar a los fabricantes que faciliten un informe provisional con actualizaciones pertinentes de la situación relativas a la vulnerabilidad aprovechada activamente o al incidente grave que repercute en la seguridad de un producto con elementos digitales.
Artículo 14 7.
Las notificaciones a que se refieren los apartados 1 y 3 del presente artículo se presentarán a través de la plataforma única de notificación a que se refiere el artículo 16, utilizando uno de los nodos finales para notificaciones electrónicas a que se refiere el artículo 16, apartado 1. La notificación se presentará utilizando el nodo final para notificaciones electrónicas del CSIRT designado como coordinador del Estado miembro en el que el fabricante tenga su establecimiento principal en la Unión, y será accesible simultáneamente para la ENISA.

A efectos del presente Reglamento, se considerará que el establecimiento principal en la Unión del fabricante se encuentra en el Estado miembro en el que se adopten de forma predominante las decisiones relativas a la ciberseguridad de sus productos con elementos digitales. Si no puede determinarse dicho Estado miembro, se considerará que el establecimiento principal se encuentra en el Estado miembro en el que el fabricante de que se trate tenga el establecimiento con mayor número de trabajadores en la Unión.

Cuando un fabricante no tenga un establecimiento principal en la Unión, presentará las notificaciones a que se refieren los apartados 1 y 3 utilizando el nodo final para notificaciones electrónicas del CSIRT designado como coordinador en el Estado miembro que se determine según la siguiente prelación y sobre la base de la información de que disponga el fabricante:

a) 

el Estado miembro en el que esté establecido el representante autorizado que actúe en nombre del fabricante para el mayor número de productos con elementos digitales de dicho fabricante;

b) 

el Estado miembro en el que esté establecido el importador que introduzca en el mercado el mayor número de productos con elementos digitales de dicho fabricante;

c) 

el Estado miembro en el que esté establecido el distribuidor que comercialice el mayor número de productos con elementos digitales de dicho fabricante;

d) 

el Estado miembro en el que esté situado el mayor número de usuarios de productos con elementos digitales de dicho fabricante.

En relación con el párrafo tercero, letra d), un fabricante podrá presentar notificaciones relacionadas con cualquier vulnerabilidad posterior aprovechada activamente, o cualquier incidente grave posterior que repercuta en la seguridad de un producto con elementos digitales, al mismo CSIRT designado como coordinador al que haya presentado la primera notificación.
Artículo 14 8.
Una vez tenga conocimiento de una vulnerabilidad aprovechada activamente o de un incidente grave con repercusiones en la seguridad de un producto con elementos digitales, el fabricante informará a los usuarios afectados del producto con elementos digitales —y, cuando proceda, a todos los usuarios— sobre la dicha vulnerabilidad o incidente y, cuando así se requiera, sobre cualquier reducción de riesgos y las medidas correctoras que los usuarios puedan adoptar para atenuar las repercusiones de la vulnerabilidad o del incidente, en su caso en un formato legible por máquina estructurado que sea fácilmente susceptible de tratamiento automatizado. Cuando el fabricante no informe en el plazo oportuno a los usuarios del producto con elementos digitales, los CSIRT designados como coordinadores que hayan sido notificados podrán facilitar dicha información a los usuarios cuando se considere proporcionado y necesario para prevenir o mitigar las repercusiones de la vulnerabilidad o el incidente en cuestión.
Artículo 14 9.
A más tardar 11 de diciembre de 2025, la Comisión adoptará actos delegados de conformidad con el artículo 61 del presente Reglamento para completar el presente Reglamento mediante la especificación de las condiciones de aplicación de los motivos relacionados con la ciberseguridad en lo que respecta al aplazamiento de la difusión de notificaciones a que se refiere el artículo 16, apartado 2, del presente Reglamento. La Comisión cooperará con la red de CSIRT establecida en virtud del artículo 15 de la Directiva (UE) 2022/2555 y con la ENISA en la preparación de los proyectos de actos delegados.
Artículo 14 10.
La Comisión podrá, mediante actos de ejecución, especificar el formato y los procedimientos de las notificaciones a que se refieren el presente artículo y los artículos 15 y 16. Dichos actos de ejecución se adoptarán de conformidad con el procedimiento de examen a que se refiere el artículo 62, apartado 2. La Comisión cooperará con la red de CSIRT y con la ENISA en la preparación de los proyectos de estos actos de ejecución.

1.1 Referencias

1.2 Requisitos identificados

1.3 Estándares relacionados

2. Requisitos identificados

Requisitos

3. Estándares relacionados

Estándares
SCF Incident Classification & Prioritization

Description

Mechanisms exist to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Incident Stakeholder Reporting

Description

Mechanisms exist to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Basic incident response plan
∙ Designate incident response contact

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Documented incident response plan
∙ Incident log
∙ Designated IR team

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Formal incident response program
∙ IR playbooks
∙ Tabletop exercises

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Enterprise incident response program
∙ 24/7 SOC monitoring
∙ SOAR platform

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise SOC with SIEM/SOAR (e.g., Splunk SOAR, Palo Alto XSOAR)
∙ IR retainer
∙ Threat hunting

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Level 4 Quantitatively Controlled

Incident Response (IRO) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Cyber Incident Reporting for Sensitive / Regulated Data

Description

Mechanisms exist to report sensitive and/or regulated data incidents in a timely manner.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Incident Response Plan (IRP)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Incident Response Plan (IRP)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Incident Response (IRO) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with IRO domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Incident response-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ IT and/or cybersecurity personnel use an informal process to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to report sensitive/regulated data incidents in a timely manner.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Incident Classification & Prioritization

Description

Mechanisms exist to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ National Cyber Incident Scoring
System (NCISS) (https://cisa.gov)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to identify classes of incidents and actions to take to ensure the continuation of organizational missions and business functions.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Incident Stakeholder Reporting

Description

Mechanisms exist to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Basic incident response plan
∙ Designate incident response contact

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Documented incident response plan
∙ Incident log
∙ Designated IR team

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Formal incident response program
∙ IR playbooks
∙ Tabletop exercises

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Enterprise incident response program
∙ 24/7 SOC monitoring
∙ SOAR platform

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise SOC with SIEM/SOAR (e.g., Splunk SOAR, Palo Alto XSOAR)
∙ IR retainer
∙ Threat hunting

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ IT and/or cybersecurity personnel facilitate prompt response to suspected or confirmed security incidents, including timely notification to affected stakeholders.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to timely-report incidents to applicable:
(1) Internal stakeholders;
(2) Affected clients & third-parties; and
(3) Regulatory authorities.

Level 4 Quantitatively Controlled

Incident Response (IRO) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Cyber Incident Reporting for Sensitive / Regulated Data

Description

Mechanisms exist to report sensitive and/or regulated data incidents in a timely manner.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Incident Response Plan (IRP)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Incident Response Plan (IRP)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Integrated Incident Response Program (IIRP)
∙ Integrated Security Incident Response Team (ISIRT)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Incident Response (IRO) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with IRO domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Incident response-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ IT and/or cybersecurity personnel use an informal process to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 2 Planned Tracked

Incident Response (IRO) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Incident response-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Incident response management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ IT and/or cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.

Level 3 Well Defined

Incident Response (IRO) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with IRO domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Cybersecurity personnel operate an incident response capability using a documented and tested Incident Response Plan (IRP) to facilitate incident management operations that cover preparation, detection and analysis, containment, eradication and recovery.
▪ An incident response team, or similar function, is appropriately staffed and supported to implement and maintain IRO domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of incident response operations (e.g., incident management software).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with IRO domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to report sensitive/regulated data incidents in a timely manner.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Disclosure of Vulnerabilities

Description

Mechanisms exist to disclose information about vulnerabilities to relevant stakeholders, including:
(1) A description of the vulnerability(ies);
(2) Affected product(s) and/or service(s);
(3) Potential impact of the vulnerability(ies);
(4) Severity of the vulnerability(ies); and
(5) Guidance to remediate the vulnerability(ies).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Notify customers of vulnerabilities in any developed products via email/website

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Security advisory template and distribution process
∙ security.txt / contact for vulnerability reports

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Vulnerability disclosure process with advisories (description, impact, remediation)
∙ Coordinated disclosure timelines

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product Security Incident Response Team (PSIRT) disclosure process (ISO/IEC 29147)
∙ CVE issuance for product vulnerabilities
∙ Customer notification channels

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise coordinated vulnerability disclosure program (ISO/IEC 29147, CNA participation)
∙ Public advisory portal and machine-readable advisories (CSAF)
∙ Regulatory notification (e.g., EU CRA) integration

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to disclose information about vulnerabilities to relevant stakeholders, including:
(1) A description of the vulnerability(ies);
(2) Affected product(s) and/or service(s);
(3) Potential impact of the vulnerability(ies);
(4) Severity of the vulnerability(ies); and
(5) Guidance to remediate the vulnerability(ies).

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.