+Artikel 30 3

Artikel 30 3

3.   De kontraktlige ordninger for brugen af IKT-tjenester, der understøtter kritiske eller vigtige funktioner, skal ud over de elementer, der er omhandlet i stk. 2, mindst omfatte følgende:

a)

en fuldstændig beskrivelse af serviceniveauer, herunder ajourføringer og revisioner heraf, med præcise kvantitative og kvalitative præstationsmål inden for de aftalte serviceniveauer, således at den finansielle enhed kan foretage en effektiv overvågning af IKT-tjenester, og således at der uden unødigt ophold kan træffes passende afhjælpende foranstaltninger, når de aftalte serviceniveauer ikke overholdes

b)

opsigelsesfrister og indberetningsforpligtelser for tredjepartsudbyderen af IKT-tjenester over for den finansielle enhed, herunder underretning om enhver udvikling, som kan have væsentlig indvirkning på, hvorvidt tredjepartsudbyderen af IKT-tjenester har evnen til effektivt at levere IKT-tjenester, der understøtter kritiske eller vigtige funktioner i overensstemmelse med de aftalte serviceniveauer

c)

krav til tredjepartsudbyderen af IKT-tjenester om at gennemføre og teste beredskabsplaner og indføre IKT-sikkerhedsforanstaltninger, -værktøjer og -politikker, som giver et passende niveau af sikkerhed for, at den finansielle enhed kan foretage levering af tjenester i overensstemmelse med dens reguleringsramme

d)

forpligtelsen for tredjepartsudbyderen af IKT-tjenester til at deltage i og fuldt ud samarbejde om den finansielle enheds TLPT som omhandlet i artikel 26 og 27

e)

retten til løbende at overvåge det præstationsniveau, som tredjepartsudbyderen af IKT-tjenester leverer, hvilket indebærer følgende:

i)

den finansielle enheds eller en udpeget tredjeparts og den kompetente myndigheds uindskrænkede ret til adgang, inspektion og revision og ret til at tage kopier af relevant dokumentation på stedet, hvis denne har afgørende betydning for tredjepartsudbyderen af IKT-tjenesters operationer, hvis faktiske udøvelse ikke hindres eller begrænses af andre kontraktlige ordninger eller gennemførelsespolitikker

ii)

retten til at nå til enighed om alternative sikkerhedsniveauer, hvis andre kunders rettigheder påvirkes

iii)

forpligtelsen for tredjepartsudbyderen af IKT-tjenester til fuldt ud at samarbejde under de inspektioner og revisioner på stedet, som de kompetente myndigheder, den ledende tilsynsførende, den finansielle enhed eller en udpeget tredjepart udfører, og

iv)

forpligtelsen til at give nærmere oplysninger om omfanget af, de procedurer, som skal følges, og hyppigheden af sådanne inspektioner og revisioner

f)

exitstrategier, navnlig indførelse af en obligatorisk passende overgangsperiode:

i)

i løbet af hvilken tredjepartsudbyderen af IKT-tjenester fortsat leverer de respektive funktioner eller IKT-tjenester med henblik på at mindske risikoen for forstyrrelser i den finansielle enhed eller sikre en effektiv afvikling eller omstrukturering heraf

ii)

som giver den finansielle enhed mulighed for at migrere til en anden tredjepartsudbyder af IKT-tjenester eller skifte til interne løsninger, der stemmer overens med den leverede tjenestes kompleksitet.

Uanset litra e) kan tredjepartsudbyderen af IKT-tjenester og den finansielle enhed, som er en mikrovirksomhed, beslutte, at den finansielle enheds ret til adgang, inspektion og revision kan delegeres til en uafhængig tredjepart, som udpeges af tredjepartsudbyderen af IKT-tjenester, og at den finansielle enhed til enhver tid kan anmode tredjeparten om oplysninger og garantier vedrørende de resultater, som tredjepartsudbyderen af IKT-tjenester opnår.

1. Oversigt

,

1.1 Referencer

1.2 Identificerede krav

1.3 Relaterede standarder

2. Identificerede krav

Krav

3. Relaterede standarder

Standarder
NOREA (Critical) Service Level Management

Ensure the contract with ICT third-party service provider delivering critical or important services encompasses comprehensive service level descriptions, including updates and detailed reporting (both quantitative and qualitative). Evaluate the service provider's compliance with performance and quality standards by reviewing reports on activities and services, incident reports, security and business continuity measures, and testing. Assess performance using key performance indicators, key control indicators, audits, self-certifications, and independent reviews. Receive relevant information from the service provider regarding their activities and services and ensure timely notification and response to incidents. Conduct independent reviews and compliance audits with legal and regulatory requirements and policies. Specify notification periods for any material changes that may impact the entity or agreed service levels.
NOREA Contractual Clauses

Secure rights for continuous performance monitoring, including unrestricted rights to access, inspection, and audit. This encompasses alternative assurance levels, cooperation with regulator inspections, and full disclosure of audit scope, procedures, and frequency. Include a mandatory transition period upon termination, allowing the service provider to continue services during migration, affording the entity time to transition to another provider or in-house solutions based on service complexity. Mandate the implementation and testing of business contingency plans and the establishment of a security management system by the service provider. 

When negotiating contractual arrangements, consider the use of standard contractual clauses developed by public authorities for specific services.

Require the service provider's participation in the entity's (advanced) testing program (TLPT), where required. Where participation of an ICT third-party service provider in TLPT may adversely impact services or data confidentiality for customers outside the scope of DORA, it may be agreed in writing to perform a pooled TLPT.
NOREA Third-party Critical Subcontracting Management

Delineate critical and important ICT services in contracts with third-party ICT service providers, specifying conditions for subcontracting. Require continual monitoring of subcontracted services supporting critical functions to ensure compliance with contractual obligations. Detail monitoring and reporting responsibilities of the third-party service provider to the financial entity, including risk assessments related to subcontractor locations and data ownership. Mandate incident response and business continuity plans for subcontractors, along with adherence to specified service levels and security standards. Retain termination rights for the financial entity in cases of unauthorized subcontracting or failure to meet agreed-upon service levels. Implement changes relative to contractual agreements as soon as possible and document the planned timeline for the implementation.
SCF Third-Party Management Policy

Description

Mechanisms exist to establish a formal, documented third-party management policy that:
(1) Conveys executive management's intent;
(2) Provides organizational direction and expected behaviors;
(3) Is reviewed at least annually; and
(4) Is updated, as necessary, to adapt to evolving risks, threats and other changes that affect the organization.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Executive-approved written policy with documented annual review

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Executive-approved written policy with documented annual review
∙ Policy acknowledgement tracking (e.g., HR onboarding records)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management
∙ Documented annual policy review with version control

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ GRC solution (e.g., SCFConnect, Cyturus, SureCloud, SimpleRisk, Ignyte, ZenGRC, Galvanize, MetricStream, Archer, etc.) for policy lifecycle management
∙ Policy governance committee with formal annual review and approval workflow
∙ Automated policy attestation and acknowledgement tracking

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Steering committee
∙ ComplianceForge - Security, Compliance & Resilience Program (SCRP) (https://complianceforge.com)
∙ Enterprise GRC platform (e.g., Cyturus, Archer, MetricStream, ServiceNow IRM) for policy lifecycle management
∙ Automated policy attestation, exception tracking and change history
∙ Annual executive approval and board-level reporting

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Acquisition Strategies, Tools & Methods

Description

Mechanisms exist to utilize tailored acquisition strategies, contract tools and procurement methods for the purchase of unique Technology Assets, Applications and/or Services (TAAS).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to utilize tailored acquisition strategies, contract tools and procurement methods for the purchase of unique Technology Assets, Applications and/or Services (TAAS).

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Security, Compliance & Resilience Outsourcing Limitations

Description

Mechanisms exist to ensure organizations involved in developing, implementing and/or maintaining Technology Assets, Applications and/or Services (TAAS) provide assurance of internal oversight capabilities that demonstrate:
(1) Governance of internal controls;
(2) Risk management, including analysis and mitigation activities; and
(3) Compliance with applicable laws, regulations and contractual obligations.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Vendor due diligence checklist
∙ Third-party security questionnaire (e.g., CAIQ, SIG)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Vendor security questionnaire (CAIQ or SIG)
∙ Third-party risk assessment prior to outsourcing

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Third-party risk management program
∙ Vendor security assessments with contractual security obligations
∙ Contract security requirements for outsourced functions

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Third-party risk management (TPRM) program
∙ Vendor SOC 2 and ISO 27001 certification requirements
∙ Contractual security and compliance obligations

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise TPRM program with automated vendor risk assessment
∙ Third-party risk ratings (e.g., BitSight, SecurityScorecard)
∙ Contractual oversight and audit rights for outsourced functions

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Cybersecurity & Data Protection Governance (GOV) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with GOV domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with GOV domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with GOV domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Governance-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ No formal Governance, Risk & Compliance (GRC) team exists. GRC roles are assigned to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure organizations involved in developing, implementing and/or maintaining Technology Assets, Applications and/or Services (TAAS) provide assurance of internal oversight capabilities that demonstrate:
(1) Governance of internal controls;
(2) Risk management, including analysis and mitigation activities; and
(3) Compliance with applicable laws, regulations and contractual obligations.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Third-Party Inventories

Description

Mechanisms exist to maintain a current, accurate and complete list of External Service Providers (ESPs) that can potentially impact the Confidentiality, Integrity, Availability and/or Safety (CIAS) of the organization's Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ A procurement function maintains a list of all active External Service Providers (ESPs), including pertinent contract information that will assist in a risk assessment.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to maintain a current, accurate and complete list of External Service Providers (ESPs) that can potentially impact the Confidentiality, Integrity, Availability and/or Safety (CIAS) of the organization's TAASD.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Review of Third-Party Services

Description

Mechanisms exist to monitor, regularly review and assess External Service Providers (ESPs) for compliance with established contractual requirements for security, compliance and resilience controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to monitor, regularly review and assess External Service Providers (ESPs) for compliance with established contractual requirements for security, compliance and resilience controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.