+Articolo 30 Principali disposizioni contrattuali
---+Articolo 30 1
---+Articolo 30 2
---+Articolo 30 3
---+Articolo 30 4
---+Articolo 30 5

Articolo 30 Principali disposizioni contrattuali

-

1. Panoramica

,
Titolo Regolamentazione
Articolo 30 1

1.   I diritti e gli obblighi dell’entità finanziaria e del fornitore terzo di servizi TIC sono attribuiti chiaramente e definiti per iscritto. Il testo integrale del contratto comprende gli accordi sul livello dei servizi ed è contenuto in un documento scritto disponibile alle parti in formato cartaceo oppure in un documento in altro formato scaricabile, durevole e accessibile.

Articolo 30 2

2.   Gli accordi contrattuali per l’utilizzo di servizi TIC comprendono almeno gli elementi seguenti:

a)

la descrizione chiara e completa di tutte le funzioni che il fornitore terzo di servizi TIC deve svolgere e tutti i servizi TIC che deve prestare, comprese l’indicazione dell’eventuale autorizzazione a subappaltare un servizio TIC a sostegno di una funzione essenziale o importante o parti significative di essa e, in caso affermativo, le condizioni di tale subappalto;

b)

le località, segnatamente le regioni o i paesi, in cui si devono svolgere le funzioni e prestare i servizi TIC appaltati o subappaltati e in cui si devono trattare i dati, compreso il luogo di conservazione, nonché l’obbligo, per il fornitore terzo di servizi TIC, di segnalare in anticipo all’entità finanziaria l’intenzione di cambiare tale o tali località;

c)

le disposizioni in materia di disponibilità, autenticità, integrità e riservatezza in relazione alla protezione dei dati, compresi i dati personali;

d)

le disposizioni relative alle garanzie di accesso, ripristino e restituzione, in un formato facilmente accessibile, di dati personali e non personali trattati dall’entità finanziaria in caso di insolvenza, risoluzione o interruzione delle operazioni commerciali del fornitore terzo di servizi TIC o in caso di risoluzione degli accordi commerciali;

e)

le descrizioni dei livelli di servizio, compresi relativi aggiornamenti e revisioni;

f)

l’obbligo per il fornitore terzo di servizi TIC di prestare assistenza all’entità finanziaria senza costi aggiuntivi o a un costo stabilito ex ante, qualora si verifichi un incidente connesso alle TIC relativo al servizio TIC fornito all’entità finanziaria;

g)

l’obbligo per il fornitore terzo di servizi di TIC di operare senza riserve con le autorità competenti e con le autorità di risoluzione dell’entità finanziaria, comprese le persone da queste nominate;

h)

i diritti di risoluzione e il relativo termine minimo di preavviso per la risoluzione degli accordi contrattuali, conformemente alle attese delle autorità competenti e delle autorità di risoluzione;

i)

le condizioni riguardanti la partecipazione dei fornitori terzi di servizi TIC ai programmi di sensibilizzazione sulla sicurezza delle TIC e alle attività di formazione sulla resilienza operativa digitale delle entità finanziarie conformemente all’articolo 13, paragrafo 6.

Articolo 30 3

3.   Gli accordi contrattuali per l’utilizzo di servizi TIC a supporto di funzioni essenziali o importanti comprendono, in aggiunta agli elementi di cui al paragrafo 2, almeno quanto segue:

a)

la descrizione completa dei livelli di servizio, comprendente i relativi aggiornamenti e revisioni con precisi obiettivi quantitativi e qualitativi, in termini di prestazioni, nell’ambito dei livelli di servizio concordati, in modo da consentire un monitoraggio efficace da parte dell’entità finanziaria dei servizi TIC e l’applicazione, senza indebito ritardo, di opportune azioni correttive qualora i livelli di servizio concordati non siano rispettati;

b)

termini di preavviso e obblighi di segnalazione per il fornitore terzo di servizi TIC nei confronti dell’entità finanziaria, tra cui la notifica di eventuali sviluppi che potrebbero esercitare un impatto significativo sulla capacità del fornitore terzo di servizi TIC di prestare servizi a supporto di funzioni essenziali o importanti efficacemente, in linea con i livelli di servizio concordati;

c)

l’obbligo per il fornitore terzo di servizi TIC di attuare e testare i piani operativi d’emergenza e di predisporre misure, strumenti e politiche per la sicurezza delle TIC che offrano un adeguato livello di sicurezza per la fornitura dei servizi da parte dell’entità finanziaria, in linea con il proprio quadro normativo;

d)

l’obbligo per il fornitore terzo di servizi TIC di partecipare e cooperare pienamente al TLPT dell’entità finanziaria di cui agli articoli 26 e 27;

e)

il diritto di monitorare costantemente le prestazioni del fornitore terzo di servizi TIC, che comporta quanto segue:

i)

diritti incondizionati di accesso, ispezione e audit da parte dell’entità finanziaria — o di un terzo designato a tal fine — e dell’autorità competente nonché il diritto di ottenere copia della documentazione pertinente in loco, se di importanza critica per le operazioni del fornitore terzo di servizi TIC, il cui effettivo esercizio non sia impedito o limitato da altri accordi contrattuali o politiche di attuazione;

ii)

il diritto di concordare livelli di garanzia alternativi, qualora siano interessati i diritti di altri clienti;

iii)

l’obbligo per il fornitore terzo di servizi TIC di cooperare senza riserve nel corso delle ispezioni e degli audit in loco svolti dalle autorità competenti, dall’autorità di sorveglianza capofila, dall’entità finanziaria o da un terzo designato; e

iv)

l’obbligo di fornire dettagli sull’ambito di applicazione, sulle procedure da seguire e sulla frequenza di tali ispezioni e audit;

f)

le strategie di uscita, in particolare la definizione di un adeguato periodo di transizione obbligatorio:

i)

durante il quale il fornitore terzo di servizi TIC continuerà a prestare i suoi servizi TIC o a esercitare le sue funzioni allo scopo di ridurre il rischio di perturbazioni presso l’entità finanziaria o di garantire la sua efficace risoluzione e ristrutturazione;

ii)

che permetta all’entità finanziaria di migrare verso un altro fornitore terzo di servizi TIC oppure di adottare soluzioni interne coerenti con la complessità del servizio prestato.

In deroga alla lettera e), il fornitore terzo di servizi TIC e l’entità finanziaria che è una microimpresa possono convenire che i diritti di accesso, ispezione e audit dell’entità finanziaria possano essere delegati a un terzo indipendente, nominato dal fornitore terzo di servizi TIC, e che l’entità finanziaria possa richiedere in qualsiasi momento al terzo informazioni e garanzie sulle prestazioni del fornitore terzo di servizi TIC.

Articolo 30 4

4.   All’atto della negoziazione degli accordi contrattuali, le entità finanziarie e i fornitori terzi di servizi TIC prendono in considerazione il ricorso a clausole contrattuali standard elaborate dalle autorità pubbliche per servizi specifici.

Articolo 30 5

5.   Le AEV, tramite il comitato congiunto, elaborano progetti di norme tecniche di regolamentazione per specificare ulteriormente gli elementi di cui al paragrafo 2, lettera a), che l’entità finanziaria deve determinare e valutare quando subappalta servizi TIC a supporto di funzioni essenziali o importanti.

All’atto dell’elaborazione di tali progetti di norme tecniche di regolamentazione, le AEV tengono conto delle dimensioni e del profilo di rischio complessivo dell’entità finanziaria, nonché della natura, della portata e della complessità dei suoi servizi, delle sue attività e delle sue operazioni.

Le AEV presentano tali progetti di norme tecniche di regolamentazione alla Commissione entro il 17 luglio 2024.

Alla Commissione è delegato il potere di integrare il presente regolamento, adottando le norme tecniche di regolamentazione di cui al primo comma in conformità degli articoli da 10 a 14 dei regolamenti (UE) n. 1093/2010, (UE) n. 1094/2010 o (UE) n. 1095/2010.

1.1 Riferimenti

1.2 Requisiti identificati

1.3 Standard correlati

2. Requisiti identificati

Requisiti
Fonte Requisito

3. Standard correlati

Standard
Fonte Requisito
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Review of Third-Party Services

Description

Mechanisms exist to monitor, regularly review and assess External Service Providers (ESPs) for compliance with established contractual requirements for security, compliance and resilience controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to monitor, regularly review and assess External Service Providers (ESPs) for compliance with established contractual requirements for security, compliance and resilience controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.