+Articolul 30 Dispoziții contractuale esențiale
---+Articolul 30 (1)
---+Articolul 30 (2)
---+Articolul 30 (3)
---+Articolul 30 (4)
---+Articolul 30 (5)

Articolul 30 Dispoziții contractuale esențiale

1. Prezentare generală

,
Titlu Reglementare
Articolul 30 (1)
Drepturile și obligațiile care revin entității financiare și furnizorului terț de servicii TIC sunt clar atribuite și definite în scris. Contractul complet include acordurile privind nivelul serviciilor și este consemnat într-un document scris care se află la dispoziția părților pe suport de hârtie sau într-un document având un alt format durabil, accesibil și care poate fi descărcat.
Articolul 30 (2)

Acordurile contractuale privind utilizarea serviciilor TIC includ cel puțin următoarele elemente:

(a) 

o descriere clară și completă a tuturor funcțiilor și serviciilor TIC care urmează să fie furnizate de furnizorul terț de servicii TIC, indicând dacă este permisă subcontractarea unui serviciu TIC care sprijină o funcție critică sau importantă sau părți semnificative ale acesteia și, în caz afirmativ, condițiile aplicabile acestei subcontractări;

(b) 

locurile, și anume regiunile sau țările, în care urmează să fie furnizate funcțiile și serviciile TIC contractate sau subcontractate și în care urmează să fie prelucrate datele, inclusiv locul stabilit pentru stocare, precum și cerința ca furnizorul terț de servicii TIC să informeze în prealabil entitatea financiară în cazul în care are în vedere modificarea acestor locuri;

(c) 

dispoziții privind disponibilitatea, autenticitatea, integritatea și confidențialitatea în ceea ce privește protecția datelor, inclusiv a datelor cu caracter personal;

(d) 

dispoziții privind asigurarea accesului, a recuperării și a returnării într-un format ușor accesibil a datelor cu caracter personal și a celor fără caracter personal prelucrate de entitatea financiară în caz de insolvență, de rezoluție sau de încetare a activității furnizorului terț de servicii TIC sau în cazul încetării acordurilor contractuale;

(e) 

descrieri la nivelul serviciilor, inclusiv actualizări și revizuiri ale acestora;

(f) 

obligația furnizorului terț de servicii TIC de a oferi asistență entității financiare fără costuri suplimentare sau la un cost stabilit ex ante, atunci când survine un incident TIC care este legat de serviciul TIC furnizat entității financiare;

(g) 

obligația furnizorului terț de servicii TIC de a coopera pe deplin cu autoritățile competente și cu autoritățile de rezoluție ale entității financiare, inclusiv cu persoanele numite de acestea;

(h) 

drepturile de încetare și perioadele minime de preaviz aferente pentru încetarea acordurilor contractuale, în conformitate cu așteptările autorităților competente și ale autorităților de rezoluție;

(i) 

condițiile pentru participarea furnizorilor terți de servicii TIC la programele de conștientizare cu privire la securitatea TIC ale entităților financiare și la cursurile de formare în domeniul rezilienței operaționale digitale în conformitate cu articolul 13 alineatul (6).

Articolul 30 (3)

Acordurile contractuale privind utilizarea serviciilor TIC care sprijină funcții critice sau importante includ, în plus față de elementele menționate la alineatul (2), cel puțin următoarele:

(a) 

descrieri complete la nivelul serviciilor, inclusiv actualizări și revizuiri ale acestora, cu obiective cantitative și calitative precise privind performanța în limitele nivelurilor convenite ale serviciilor, pentru a permite monitorizarea eficace de către entitatea financiară a serviciilor TIC și adoptarea unor măsuri corective adecvate, fără întârzieri nejustificate, atunci când nu sunt asigurate nivelurile convenite ale serviciilor;

(b) 

perioade de preaviz și obligații de raportare către entitatea financiară pentru furnizorul terț de servicii TIC, inclusiv notificarea oricărei evoluții care ar putea avea un impact semnificativ asupra capacității furnizorului terț de servicii TIC de a furniza în mod eficace serviciile TIC în sprijinul funcțiilor critice sau importante, în concordanță cu nivelurile convenite ale serviciului;

(c) 

cerințe ca furnizorul terț de servicii TIC să pună în aplicare și să testeze planuri pentru situații neprevăzute și să dispună de măsuri, instrumente și politici în materie de securitate a TIC care să asigure un nivel adecvat de securitate în ceea ce privește furnizarea serviciilor de către entitatea financiară, în concordanță cu cadrul său de reglementare;

(d) 

obligația furnizorului terț de servicii TIC de a participa la TLPT ale entității financiare și de a coopera pe deplin în cadrul realizării acestora, astfel cum se menționează la articolele 26 și 27;

(e) 

dreptul de a monitoriza, în permanență, performanța furnizorului terț de servicii TIC, care presupune următoarele:

(i) 

drepturile nerestricționate de acces, de inspecție și de audit de către entitatea financiară sau o parte terță desemnată și de către autoritatea competentă, precum și dreptul de a produce copii ale documentelor relevante la fața locului, dacă acestea sunt esențiale pentru operațiunile furnizorului terț de servicii TIC, drepturi a căror exercitare efectivă nu este împiedicată sau limitată de alte acorduri contractuale sau politici de punere în aplicare;

(ii) 

dreptul de a conveni asupra unor niveluri de asigurare alternative în cazul în care sunt afectate drepturile altor clienți;

(iii) 

obligația furnizorului terț de servicii TIC de a coopera pe deplin în timpul inspecțiilor și auditurilor la fața locului efectuate de autoritățile competente, de supraveghetorul principal, de entitatea financiară sau de o parte terță desemnată; și

(iv) 

obligația de a transmite detalii privind domeniul de aplicare, procedurile care trebuie urmate și frecvența unor astfel de inspecții și audituri;

(f) 

strategiile de ieșire, în special stabilirea unei perioade de tranziție adecvate obligatorii:

(i) 

în cursul căreia furnizorul terț de servicii TIC va continua să furnizeze funcțiile sau serviciile TIC respective vizând să reducă riscul de perturbare în cadrul entității financiare sau să asigure rezoluția și restructurarea sa eficace;

(ii) 

care permite entității financiare să migreze către un alt furnizor terț de servicii TIC sau să treacă la soluții dezvoltate de aceasta pe plan intern, în conformitate cu complexitatea serviciului furnizat.

Prin derogare de la litera (e), furnizorul terț de servicii TIC și entitatea financiară care este o microîntreprindere pot conveni ca drepturile de acces, de inspecție și de audit ale entității financiare să poată fi delegate unui terț independent, numit de furnizorul terț de servicii TIC, și ca entitatea financiară să poată solicita în orice moment din partea terțului informații și asigurări cu privire la performanța furnizorului terț de servicii TIC.

Articolul 30 (4)
La negocierea acordurilor contractuale, entitățile financiare și furnizorii terți de servicii TIC țin seama de utilizarea clauzelor contractuale standard elaborate de autoritățile publice pentru servicii specifice.
Articolul 30 (5)
AES elaborează, prin intermediul Comitetului comun, proiecte de standarde tehnice de reglementare pentru a aduce precizări suplimentare cu privire la elementele menționate la alineatul (2) litera (a), pe care o entitate financiară trebuie să le stabilească și să le evalueze atunci când subcontractează servicii TIC care sprijină funcții critice sau importante.

Atunci când elaborează aceste proiecte de standarde tehnice de reglementare, AES țin seama de dimensiunea și de profilul general de risc al entității financiare, precum și de natura, amploarea și complexitatea serviciilor, activităților și operațiunilor sale.

AES transmit Comisiei aceste proiecte de standarde tehnice de reglementare până la 17 iulie 2024.

Se deleagă Comisiei competența de a completa prezentul regulament prin adoptarea standardelor tehnice de reglementare menționate la primul paragraf, în conformitate cu articolele 10-14 din Regulamentele (UE) nr. 1093/2010, (UE) nr. 1094/2010 și (UE) nr. 1095/2010.

1.1 Referințe

1.2 Cerințe identificate

1.3 Standarde asociate

2. Cerințe identificate

Cerințe
Sursă Cerință

3. Standarde asociate

Standarde
Sursă Cerință
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Review of Third-Party Services

Description

Mechanisms exist to monitor, regularly review and assess External Service Providers (ESPs) for compliance with established contractual requirements for security, compliance and resilience controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to monitor, regularly review and assess External Service Providers (ESPs) for compliance with established contractual requirements for security, compliance and resilience controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Third-Party Management

Description

Mechanisms exist to facilitate the implementation of third-party management controls.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Product / project management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

Third-Party Management (TPM) domain capabilities are ad hoc and inconsistent. Capability criteria associated with this control may include:
▪ Policies, standards & procedures associated with TPM domain capabilities provide limited coverage due to the depth and breadth of the existing documentation.
▪ Third-party management-related activities are decentralized (e.g., a localized/regionalized function) and uses non-standardized methods to implement secure, resilient and compliant practices.
▪ No centralized inventory of External Service Providers (ESP) is maintained.
▪ ESP are not formally managed according to criticality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to facilitate the implementation of third-party management controls.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Supply Chain Risk Management (SCRM)

Description

Mechanisms exist to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to:
(1) Evaluate security risks and threats associated with Technology Assets, Applications and/or Services (TAAS) supply chains; and
(2) Take appropriate remediation actions to minimize the organization's exposure to those risks and threats, as necessary.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions via Artificial Intelligence (AI) or Machine Learning (ML) technologies.
SCF Third-Party Contract Requirements

Description

Mechanisms exist to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its Technology Assets, Applications, Services and/or Data (TAASD).

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Cybersecurity Supply Chain Risk Management (C-SCRM) program
∙ Data Protection Impact Assessment (DPIA)
∙ Third-party contract requirements for cybersecurity controls
∙ Non-Disclosure Agreements (NDAs)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Third-Party Management (TPM) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Third-party management-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Asset management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Procurement practices contractually require ESP to follow secure engineering practices as part of a broader Cybersecurity Supply Chain Risk Management (C-SCRM) initiative.
▪ A formal agreement exists between the organization and applicable third-parties that includes a Non-Disclosure Agreement (NDA) addressing shared sensitive data.

Level 3 Well Defined

Third-Party Management (TPM) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TPM domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TPM domain capabilities are well-documented and kept current by process owners.
▪ A procurement team, or similar function, is appropriately staffed and supported to implement and maintain TPM domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of third-party management operations (e.g., TPRM risk management solution and vendor management solution).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TPM domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to require contractual requirements for applicable security, compliance and resilience requirements with third-parties, reflecting the organization's needs to protect its TAASD.

Level 4 Quantitatively Controlled

Third-Party Management (TPM) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.