+Článek 25 Povinnosti v celém hodnotovém řetězci AI
---+Článek 25 1.
---+Článek 25 2.
---+Článek 25 3.
---+Článek 25 4.
---+Článek 25 5.

Článek 25 Povinnosti v celém hodnotovém řetězci AI

-

1. Přehled

,
Článek 25 1.

Jakýkoli distributor, dovozce, zavádějící subjekt nebo jiná třetí strana se pro účely tohoto nařízení považují za poskytovatele vysoce rizikového systému AI a vztahují se na ně povinnosti poskytovatele podle článku 16, pokud nastane kterákoli z následujících okolností:

a) 

uvedli své jméno, název nebo ochrannou známku na vysoce rizikovém systému AI, který již byl uveden na trh nebo do provozu, aniž jsou dotčena smluvní ujednání, která stanoví, že povinnosti jsou rozděleny jiným způsobem;

b) 

provádějí podstatnou změnu vysoce rizikového systému AI, který je již uveden na trh nebo je již uveden do provozu, a to tak, že zůstává vysoce rizikovým systémem AI v souladu s článkem 6;

c) 

mění zamýšlený účel systému AI, včetně obecného systému AI, který nebyl klasifikován jako vysoce rizikový a je již uveden na trh nebo do provozu takovým způsobem, že se dotčený systém AI stane vysoce rizikovým systémem AI v souladu s článkem 6.
Článek 25 2.
Pokud nastanou okolnosti uvedené v odstavci 1, poskytovatel, který původně uvedl systém AI na trh nebo do provozu, není pro účely tohoto nařízení již nadále považován za poskytovatele tohoto konkrétního systému AI.

Tento původní poskytovatel úzce spolupracuje s novými poskytovateli a zpřístupní nezbytné informace a poskytne přiměřeně očekávaný technický přístup a další pomoc, které jsou nezbytné pro plnění povinností stanovených v tomto nařízení, zejména pokud jde o soulad s posuzováním shody vysoce rizikových systémů AI.

Povinnost stanovená v druhém pododstavci zahrnuje, je-li to relevantní pro účely v něm uvedené, zejména:

a) 

zpřístupnění technické dokumentace dostatečné k posouzení souladu s požadavky stanovenými v článku 16;

b) 

informování nových poskytovatelů o známých omezeních a režimech poruch a

c) 

poskytnutí cíleného technického přístupu, včetně přístupu k testování a validaci, novým poskytovatelům.

Tento odstavec se nepoužije v případech, kdy původní poskytovatel jasně stanovil, že jeho systém AI nemá být změněn na vysoce rizikový systém AI, a proto se na něj nevztahuje povinnost spolupracovat s novými poskytovateli a předložit dokumentaci.
Článek 25 3.

V případě vysoce rizikových systémů AI, které jsou bezpečnostními komponentami produktů, na něž se vztahují harmonizační právní předpisy Unie uvedené v příloze I oddíle A, se za poskytovatele vysoce rizikového systému AI považuje výrobce produktů, na nějž se pak vztahují povinnosti stanovené v článku 16 v případě, že nastane jedna z těchto situací:

a) 

vysoce rizikový systém AI je uváděn na trh společně s výrobkem pod jménem, názvem nebo ochrannou známkou výrobce produktu;

b) 

vysoce rizikový systém AI je uveden do provozu pod jménem, názvem nebo ochrannou známkou výrobce produktu poté, co byl výrobek uveden na trh.
Článek 25 4.
Poskytovatel vysoce rizikového systému AI a třetí strana, která dodává systém AI, model AI, nástroje, služby, komponenty nebo procesy, které jsou v tomto vysoce rizikovém systému AI používány nebo jsou do něj zabudovány, upřesní prostřednictvím písemné dohody nezbytné informace, schopnosti, technický přístup a jinou pomoc na základě obecně uznávaného stavu techniky, aby poskytovatel vysoce rizikového systému AI mohl v plném rozsahu plnit povinnosti stanovené v tomto nařízení. Tento odstavec se nevztahuje na třetí strany, které na základě bezplatné a otevřené licence zpřístupňují veřejnosti jiné nástroje, služby, procesy nebo komponenty, než jsou obecné modely AI.

Úřad pro AI může vypracovat a doporučit dobrovolné vzorové podmínky smluv uzavíraných mezi poskytovateli vysoce rizikových systémů AI a třetími stranami, které dodávají nástroje, služby, komponenty nebo procesy, které jsou používány nebo integrovány do vysoce rizikových systémů AI. Při vypracovávání těchto dobrovolných vzorových podmínek zohlední úřad pro AI možné smluvní požadavky uplatňované v konkrétních odvětvích nebo obchodních případech. Tyto dobrovolné vzorové podmínky se zveřejní a bezplatně zpřístupní ve snadno použitelném elektronickém formátu.
Článek 25 5.
Odstavci 2 a 3 není dotčena potřeba dodržovat a chránit práva duševního vlastnictví, důvěrné obchodní informace a obchodní tajemství v souladu s právem Unie a vnitrostátním právem.

1.1 Odkazy

1.2 Identifikované požadavky

1.3 Související standardy

2. Identifikované požadavky

Požadavky

3. Související standardy

Standardy
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.