+Člen 25 Odgovornosti vzdolž verige vrednosti UI
---+Člen 25 1.
---+Člen 25 2.
---+Člen 25 3.
---+Člen 25 4.
---+Člen 25 5.

Člen 25 Odgovornosti vzdolž verige vrednosti UI

-

1. Pregled

,
Člen 25 1.

Vsak distributer, uvoznik, uvajalec ali druga tretja oseba za namene te uredbe šteje za ponudnika visokotveganega sistema UI in zanj veljajo obveznosti ponudnika iz člena 16 v kateri koli od naslednjih okoliščin:

(a) 

visokotvegani sistem UI, ki je že bil dan na trg ali v uporabo, označijo s svojim imenom ali znamko, brez poseganja v pogodbene dogovore, ki določajo, da so obveznosti drugače dodeljene;

(b) 

bistveno spremenijo visokotvegani sistem UI, ki je že bil dan na trg ali v uporabo, na način, da ostane visokotvegani sistem UI na podlagi člena 6;

(c) 

spremenijo predvideni namen sistema UI, vključno s sistemom UI za splošne namene, ki ni bil razvrščen kot sistem visokega tveganja in je že bil dan na trg ali v uporabo na način, da postane visokotvegani sistem UI v skladu s členom 6.
Člen 25 2.
Kadar nastopijo okoliščine iz odstavka 1, ponudnik, ki je prvotno dal sistem UI na trg ali v uporabo, za namene te uredbe ne šteje več za ponudnika tega posameznega sistema UI.

Ta prvotni ponudnik tesno sodeluje z novimi ponudniki in omogoča dostopnost potrebnih informacij ter zagotavlja razumno pričakovani tehnični dostop in drugo pomoč, ki je potrebna za izpolnjevanje obveznosti iz te uredbe, zlasti v zvezi z ugotavljanjem skladnosti visokotveganih sistemov UI.

Obveznost iz drugega pododstavka vključuje zlasti naslednje, kadar je to ustrezno za namene iz navedenega pododstavka:

(a) 

omogočanje dostopnosti do tehnične dokumentacije, ki zadostuje za oceno skladnosti z zahtevami iz člena 16;

(b) 

obveščanje novih ponudnikov o znanih omejitvah in okvarah in

(c) 

ciljno usmerjen tehnični dostop za nove ponudnike, tudi za testiranje in validacijo.

Ta odstavek se ne uporablja v primerih, kadar je prvotni ponudnik jasno navedel, da se njegov sistem UI ne sme spremeniti v visokotvegani sistem UI, in zato zanj ne velja obveznost sodelovanja z novimi ponudniki in predaje dokumentacije.
Člen 25 3.

Za visokotvegane sisteme UI, ki so varnostne komponente proizvodov, za katere se uporablja harmonizacijska zakonodaja Unije iz Priloge I, oddelek A, proizvajalec teh proizvodov šteje za ponudnika visokotveganega sistema UI in zanj veljajo obveznosti iz člena 16 na podlagi enega od naslednjih scenarijev:

(a) 

visokotvegani sistem UI se da na trg skupaj s proizvodom pod imenom ali znamko proizvajalca proizvoda;

(b) 

visokotvegani sistem UI se da v uporabo pod imenom ali znamko proizvajalca proizvoda, potem ko je bil ta dan na trg.
Člen 25 4.
Ponudnik visokotveganega sistema UI in tretja oseba, ki dobavlja sistem UI, model UI, orodja, storitve, komponente ali procese, ki se uporabljajo ali integrirajo v visokotvegani sistem UI, s pisnim dogovorom določita potrebne informacije, zmogljivosti, tehnični dostop in drugo pomoč na podlagi splošno priznanih najsodobnejših tehnoloških dosežkov, da lahko ponudnik visokotveganega sistema UI v celoti izpolnjuje obveznosti iz te uredbe. Ta odstavek se ne uporablja za tretje osebe, ki javnosti omogočajo dostop do orodij, storitev, postopkov ali komponent, ki niso modeli UI za splošne namene, na podlagi proste in odprtokodne licence.

Urad za UI lahko pripravi in priporoči prostovoljne vzorčne pogoje za pogodbe med ponudniki visokotveganih sistemov UI in tretjimi osebami, ki zagotavljajo orodja, storitve, komponente ali postopke, ki se uporabljajo za visokotvegane sisteme UI ali so vanje vključeni. Urad za UI pri oblikovanju teh vzorčnih pogojev upošteva morebitne pogodbene zahteve, ki se uporabljajo v posameznih sektorjih ali poslovnih primerih. Prostovoljni vzorčni pogoji se objavijo in so brezplačno na voljo v lahko uporabni elektronski obliki.
Člen 25 5.
Odstavka 2 in 3 ne posegata v potrebo po spoštovanju in varstvu pravic intelektualne lastnine, zaupnih poslovnih informacij in poslovnih skrivnosti v skladu s pravom Unije in nacionalnim pravom.

1.1 Sklici

1.2 Ugotovljene zahteve

1.3 Povezani standardi

2. Ugotovljene zahteve

Zahteve

3. Povezani standardi

Standardi
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.
SCF Product Conformity Governance

Description

Mechanisms exist to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Identify laws/regulations applicable to any developed products (e.g., privacy, accessibility)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Regulatory requirements checklist for product development
∙ Legal review before release

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Product compliance requirements defined at project start
∙ Compliance validation before release
∙ Regulatory conformity records

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Product conformity governance program (statutory, regulatory, certification requirements)
∙ Compliance gates in release management
∙ Conformity documentation (e.g., declarations of conformity)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Enterprise product compliance program covering statutory/regulatory conformity (e.g., EU CRA, FDA, UL 2900)
∙ Regulatory affairs and product security integration
∙ Conformity assessment and certification management

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Technology Development & Acquisition (TDA) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Technology development and acquisition-related controls are primarily administrative and preventative in nature (e.g., policies, standards and procedures & guidelines).
▪ Technology development and acquisition management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ Secure development practices mostly conform to industry-recognized standards for secure engineering of Technology Assets, Applications and/or Services (TAAS) (e.g., OWASP, NIST SP 800-218 and NIST SP 800-160).
▪ An application development team, or similar function, uses a structured process to design, build and maintain secure configurations for test, development, staging and production environments.

Level 3 Well Defined

Technology Development & Acquisition (TDA) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with TDA domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with TDA domain capabilities are well-documented and kept current by process owners.
▪ A software development team, or similar function, is appropriately staffed and supported to implement and maintain TDA domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of technology development and acquisition management (e.g., project management software, software escrow solution and software testing tools).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with TDA domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to ensure developed Technology Assets, Applications and/or Services (TAAS) conform to applicable statutory and regulatory requirements, based on the product's and/or service's:
(1) Use case(s); and
(2) Geographic markets.

Level 4 Quantitatively Controlled

Utilize SCR-CMM Level 3 criteria definitions:
▪ There are no defined Level 4 criteria, since it is reasonable to assume a quantitatively-controlled process is not necessary to operationalize this control.
▪ While it may be possible to develop “metrics-driven” capabilities for this control, the criteria would be organization-specific to define.

Level 5 Continuously Improving

Utilize SCR-CMM Level 3 or Level 4 (if available) criteria definitions:
▪ There are no defined Level 5 criteria, since it is reasonable to assume a continuously-improving process is not necessary to operationalize this control.
▪ Level 5 capabilities should be considered “world-class” where the control builds on Level 4 capabilities, but are continuously improving through Artificial Intelligence (AI) and/or Machine Learning (ML) technologies.
▪ While it may be possible to develop responsive capabilities for this control through the use of AI and/or ML technologies, the criteria would be organization-specific to define.