+ANNEX V WASTE LISTS FOR THE PURPOSE OF ARTICLE 39
|
ANNEX V WASTE LISTS FOR THE PURPOSE OF ARTICLE 39
ANNEX V
WASTE LISTS FOR THE PURPOSE OF ARTICLE 39
Introductory notes
1. This Annex applies without prejudice to Directive 2008/98/EC.
2. This Annex consists of two parts. Article 39 further refers to the list of waste as referred to in Article 7 of Directive 2008/98/EC. For the purposes of this Regulation and to determine whether a specific waste is covered by the export prohibition in Article 39 of this Regulation, the list of waste as referred to in Article 7 of Directive 2008/98/EC applies only when List A of Part 1 of this Annex is not applicable. If a waste is not listed in List A of Part 1 of this Annex, and not listed as a hazardous waste in the list of waste as referred to in Article 7 of Directive 2008/98/EC, only then it must be checked if it is listed in Part 2 of this Annex.
3. Wastes listed in List B of Part 1 or which are among the non-hazardous waste listed in the list of waste as referred to in Article 7 of Directive 2008/98/EC (i.e. wastes not marked with an asterisk) are covered by the export prohibition if they are contaminated by other materials to an extent which:
(a)
increases the risks associated with the wastes sufficiently to render it appropriate for submission to the procedure of prior written notification and consent, when taking into account the list of waste referred to in Article 7 of Directive 2008/98/EC as well as the hazardous properties listed in Annex III to that Directive; or
(b)
prevents the recovery of the waste in an environmentally sound manner.
Part 1 (
26
)
List A (Annex VIII to the Basel Convention)
|
A1
|
Metal and metal-bearing wastes
|
|
A1010
|
Metal wastes and waste consisting of alloys of any of the following:
but excluding such wastes specifically listed on list B.
|
|
A1020
|
Waste having as constituents or contaminants, excluding metal waste in massive form, any of the following:
—
Antimony; antimony compounds
—
Beryllium; beryllium compounds
—
Cadmium; cadmium compounds
—
Selenium; selenium compounds
—
Tellurium; tellurium compounds
|
|
A1030
|
Wastes having as constituents or contaminants any of the following:
—
Arsenic; arsenic compounds
—
Mercury; mercury compounds
—
Thallium; thallium compounds
|
|
A1040
|
Wastes having as constituents any of the following:
—
Hexavalent chromium compounds
|
|
A1060
|
Waste liquors from the pickling of metals
|
|
A1070
|
Leaching residues from zinc processing, dust and sludges such as jarosite, hematite, etc.
|
|
A1080
|
Waste zinc residues not included on list B, containing lead and cadmium in concentrations sufficient to exhibit Annex III characteristics
|
|
A1090
|
Ashes from the incineration of insulated copper wire
|
|
A1100
|
Dusts and residues from gas cleaning systems of copper smelters
|
|
A1110
|
Spent electrolytic solutions from copper electrorefining and electrowinning operations
|
|
A1120
|
Waste sludges, excluding anode slimes, from electrolyte purification systems in copper electrorefining and electrowinning operations
|
|
A1130
|
Spent etching solutions containing dissolved copper
|
|
A1140
|
Waste cupric chloride and copper cyanide catalysts
|
|
A1150
|
Precious metal ash from incineration of printed circuit boards not included on list B (
27
)
|
|
A1160
|
Waste lead-acid batteries, whole or crushed
|
|
A1170
|
Unsorted waste batteries excluding mixtures of only list B batteries. Waste batteries not specified on list B containing Annex I constituents to an extent to render them hazardous.
|
▼M1
|
A1181
|
Electrical and electronic waste (note the related entry Y49 in List A of Part 2 in Annex V):
—
Waste electrical and electronic equipment
—
containing or contaminated with cadmium, lead, mercury, organohalogen compounds or other Annex I constituents to an extent that the waste exhibits an Annex III characteristic, or
—
with a component containing or contaminated with Annex I constituents to an extent that the component exhibits an Annex III characteristic, including but not limited to any of the following components:
—
glass from cathode-ray tubes included on list A
—
a battery included on list A
—
a switch, lamp, fluorescent tube or a display device backlight which contains mercury
—
a capacitor containing PCBs
—
a component containing asbestos
—
certain plastic components containing a brominated flame retardant
—
Waste components of electrical and electronic equipment containing or contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III characteristic, unless covered by another entry on list A
—
Wastes arising from the processing of waste electrical and electronic equipment or waste components of electrical and electronic equipment, and containing or contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic (e.g. fractions arising from shredding or dismantling), unless covered by another entry on list A
|
▼B
|
A1190
|
Waste metal cables coated or insulated with plastics containing or contaminated with coal tar, PCB (
28
), lead, cadmium, other organohalogen compounds or other Annex I constituents, to the extent that they exhibit Annex III characteristics
|
|
A2
|
Wastes containing principally inorganic constituents, which may contain metals and organic materials
|
|
A2010
|
Glass waste from cathode-ray tubes and other activated glasses
|
|
A2020
|
Waste inorganic fluorine compounds in the form of liquids or sludges but excluding such wastes specified on list B
|
|
A2030
|
Waste catalysts but excluding such wastes specified on list B
|
|
A2040
|
Waste gypsum arising from chemical industry processes, when containing Annex I constituents to the extent that it exhibits an Annex III hazardous characteristic (note the related entry on list B, B2080)
|
|
A2050
|
Waste asbestos (dusts and fibres)
|
|
A2060
|
Coal-fired power plant fly-ash containing Annex I substances in concentrations sufficient to exhibit Annex III characteristics (note the related entry on list B, B2050)
|
|
A3
|
Wastes containing principally organic constituents, which may contain metals and inorganic materials
|
|
A3010
|
Waste from the production or processing of petroleum coke and bitumen
|
|
A3020
|
Waste mineral oils unfit for their originally intended use
|
|
A3030
|
Wastes that contain, consist of or are contaminated with leaded anti-knock compound sludges
|
|
A3040
|
Waste thermal (heat transfer) fluids
|
|
A3050
|
Wastes from production, formulation and use of resins, latex, plasticizers, glues/adhesives excluding such wastes specified on list B (note the related entry on list B, B4020)
|
|
A3060
|
Waste nitrocellulose
|
|
A3070
|
Waste phenols, phenol compounds including chlorophenol in the form of liquids or sludges
|
|
A3080
|
Waste ethers not including those specified on list B
|
|
A3090
|
Waste leather dust, ash, sludges and flours when containing hexavalent chromium compounds or biocides (note the related entry on list B, B3100)
|
|
A3100
|
Waste paring and other waste of leather or of composition leather not suitable for the manufacture of leather articles containing hexavalent chromium compounds or biocides (note the related entry on list B, B3090)
|
|
A3110
|
Fellmongery wastes containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list B, B3110)
|
|
A3120
|
Fluff — light fraction from shredding
|
|
A3130
|
Waste organic phosphorous compounds
|
|
A3140
|
Waste non-halogenated organic solvents but excluding such wastes specified on list B
|
|
A3150
|
Waste halogenated organic solvents
|
|
A3160
|
Waste halogenated or unhalogenated non-aqueous distillation residues arising from organic solvent recovery operations
|
|
A3170
|
Wastes arising from the production of aliphatic halogenated hydrocarbons (such as chloromethane, dichloro-ethane, vinyl chloride, vinylidene chloride, allyl chloride and epichlorhydrin)
|
|
A3180
|
Wastes, substances and articles containing, consisting of or contaminated with polychlorinated biphenyl (PCB), polychlorinated terphenyl (PCT), polychlorinated naphthalene (PCN) or polybrominated biphenyl (PBB), or any other polybrominated analogues of these compounds, at a concentration level of 50 mg/kg or more (
29
)
|
|
A3190
|
Waste tarry residues (excluding asphalt cements) arising from refining, distillation and any pyrolitic treatment of organic materials
|
|
A3200
|
Bituminous material (asphalt waste) from road construction and maintenance, containing tar (note the related entry on list B B2130)
|
|
A3210
|
Plastic waste, including mixtures of such waste, containing or contaminated with Annex I constituents, to an extent that it exhibits an Annex III characteristic (note the related entry B3011, in list B of this Part, and entry Y48, in list A of Part 2)
|
|
A4
|
Wastes which may contain either inorganic or organic constituents
|
|
A4010
|
Wastes from the production, preparation and use of pharmaceutical products but excluding such wastes specified on list B
|
|
A4020
|
Clinical and related wastes; that is wastes arising from medical, nursing, dental, veterinary, or similar practices, and wastes generated in hospitals or other facilities during the investigation or treatment of patients, or research projects
|
|
A4030
|
Wastes from the production, formulation and use of biocides and phytopharmaceuticals, including waste pesticides and herbicides that are off-specification, out-dated (
30
), or unfit for their originally intended use
|
|
A4040
|
Wastes from the manufacture, formulation and use of wood-preserving chemicals (
31
)
|
|
A4050
|
Wastes that contain, consist of or are contaminated with any of the following:
—
Inorganic cyanides, excepting precious-metal-bearing residues in solid form containing traces of inorganic cyanides
|
|
A4060
|
Waste oils/water, hydrocarbons/water mixtures, emulsions
|
|
A4070
|
Wastes from the production, formulation and use of inks, dyes, pigments, paints, lacquers, varnish excluding any such waste specified on list B (note the related entry on list B, B4010)
|
|
A4080
|
Wastes of an explosive nature (but excluding such wastes specified on list B)
|
|
A4090
|
Waste acidic or basic solutions, other than those specified in the corresponding entry on list B (note the related entry on list B, B2120)
|
|
A4100
|
Wastes from industrial pollution control devices for cleaning of industrial off-gases but excluding such wastes specified on list B
|
|
A4110
|
Wastes that contain, consist of or are contaminated with any of the following:
—
any congenor of polychlorinated dibenzo-furan
—
any congenor of polychlorinated dibenzo-dioxin
|
|
A4120
|
Wastes that contain, consist of or are contaminated with peroxides
|
|
A4130
|
Waste packages and containers containing Annex I substances in concentrations sufficient to exhibit Annex III hazard characteristics
|
|
A4140
|
Waste consisting of or containing off-specification or out-dated (
32
) chemicals corresponding to Annex I categories and exhibiting Annex III hazard characteristics
|
|
A4150
|
Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on human health and/or the environment are not known
|
|
A4160
|
Spent activated carbon not included on list B (note the related entry on list B, B2060)
|
List B (Annex IX to the Basel Convention)
|
B1
|
Metal and metal-bearing wastes
|
|
B1010
|
Metal and metal-alloy wastes in metallic, non-dispersible form:
—
Precious metals (gold, silver, the platinum group, but not mercury)
—
Scrap of Hafnium, Indium, Niobium, Rhenium and Gallium
|
|
B1020
|
Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, plate, beams, rods, etc.):
—
Lead scrap (but excluding lead-acid batteries)
|
|
B1030
|
Refractory metals containing residues
|
|
B1031
|
Molybdenum, tungsten, titanium, tantalum, niobium and rhenium metal and metal alloy wastes in metallic dispersible form (metal powder), excluding such wastes as specified in list A under entry A1050, Galvanic sludges.
|
|
B1040
|
Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous
|
|
B1050
|
Mixed non-ferrous metal, heavy fraction scrap, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics (
33
)
|
|
B1060
|
Waste selenium and tellurium in metallic elemental form including powder
|
|
B1070
|
Waste of copper and copper alloys in dispersible form, unless they contain Annex I constituents to an extent that they exhibit Annex III characteristics
|
|
B1080
|
Zinc ash and residues including zinc alloys residues in dispersible form unless containing Annex I constituents in concentration such as to exhibit Annex III characteristics or exhibiting hazard characteristic H4.3 (
34
)
|
|
B1090
|
Waste batteries conforming to a specification, excluding those made with lead, cadmium or mercury
|
|
B1100
|
Metal-bearing wastes arising from melting, smelting and refining of metals:
—
Zinc-containing drosses:
—
Galvanizing slab zinc top dross (> 90 % Zn)
—
Galvanizing slab zinc bottom dross (> 92 % Zn)
—
Zinc die casting dross (> 85 % Zn)
—
Hot dip galvanizers slab zinc dross (batch) (> 92 % Zn)
—
Aluminium skimmings (or skims) excluding salt slag
—
Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex III hazard characteristics
—
Wastes of refractory linings, including crucibles, originating from copper smelting
—
Slags from precious metals processing for further refining
—
Tantalum bearing tin slags with less than 0,5 % tin
|
▼M1 —————
▼B
|
B1115
|
Waste metal cables coated or insulated with plastics, not included in entry A1190, excluding those destined for Annex IVA operations or any other disposal operations involving, at any stage, uncontrolled thermal processes, such as open-burning
|
|
B1120
|
Spent catalysts excluding liquids used as catalysts, containing any of:
|
—
|
Transition Metals, excluding waste catalysts (spent catalysts, liquid used catalysts or other catalysts) on list A
|
Scandium
Vanadium
Manganese
Cobalt
Copper
Yttrium
Niobium
Hafnium
Tungsten
|
Titanium
Chromium
Iron
Nickel
Zinc
Zirconium
Molybdenum
Tantalum
Rhenium
|
|
—
|
Lanthanides (rare earth metals):
|
Lanthanum
Praseodymium
Samarium
Gadolinium
Dysprosium
Erbium
Ytterbium
|
Cerium
Neodymium
Europium
Terbium
Holmium
Thulium
Lutetium
|
|
|
B1130
|
Cleaned spent precious-metal-bearing catalysts
|
|
B1140
|
Precious-metal-bearing residues in solid form, which contain traces of inorganic cyanides
|
|
B1150
|
Precious metals and alloy wastes (gold, silver, the platinum group, but not mercury) in a dispersible, non-liquid form with appropriate packaging and labelling
|
|
B1160
|
Precious-metal ash from the incineration of printed circuit boards (note the related entry on list A, A1150)
|
|
B1170
|
Precious-metal ash from the incineration of photographic film
|
|
B1180
|
Waste photographic film containing silver halides and metallic silver
|
|
B1190
|
Waste photographic paper containing silver halides and metallic silver
|
|
B1200
|
Granulated slag arising from the manufacture of iron and steel
|
|
B1210
|
Slag arising from the manufacture of iron and steel including slags as a source of TiO2 and vanadium
|
|
B1220
|
Slag from zinc production, chemically stabilized, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301) mainly for construction
|
|
B1230
|
Mill scaling arising from the manufacture of iron and steel
|
|
B1240
|
Copper oxide mill-scale
|
|
B1250
|
Waste end-of-life motor vehicles, containing neither liquids nor other hazardous components
|
|
B2
|
Wastes containing principally inorganic constituents, which may contain metals and organic materials
|
|
B2010
|
Wastes from mining operations in non-dispersible form:
—
Slate waste, whether or not roughly trimmed or merely cut, by sawing or otherwise
—
Leucite, nepheline and nepheline syenite waste
—
Silica wastes in solid form excluding those used in foundry operations
|
|
B2020
|
Glass waste in non-dispersible form:
—
Cullet and other waste and scrap of glass except for glass from cathode-ray tubes and other activated glasses
|
|
B2030
|
Ceramic wastes in non-dispersible form:
—
Cermet wastes and scrap (metal ceramic composites)
—
Ceramic based fibres not elsewhere specified or included
|
|
B2040
|
Other wastes containing principally inorganic constituents:
—
Partially refined calcium sulphate produced from flue-gas desulphurization (FGD)
—
Waste gypsum wallboard or plasterboard arising from the demolition of buildings
—
Slag from copper production, chemically stabilized, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301 and DIN 8201) mainly for construction and abrasive applications
—
Limestone from the production of calcium cyanamide (having a pH less than 9)
—
Sodium, potassium, calcium chlorides
—
Carborundum (silicon carbide)
—
Lithium-tantalum and lithium-niobium containing glass scraps
|
|
B2050
|
Coal-fired power plant fly-ash, not included on list A (note the related entry on list A, A2060)
|
|
B2060
|
Spent activated carbon not containing any Annex I constituents to the extent that they exhibit Annex III characteristics, for example, carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry on list A, A4160)
|
|
B2070
|
Calcium fluoride sludge
|
|
B2080
|
Waste gypsum arising from chemical industry processes not included on list A (note the related entry on list A, A2040)
|
|
B2090
|
Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry)
|
|
B2100
|
Waste hydrates of aluminium and waste alumina and residues from alumina production excluding such materials used for gas cleaning, flocculation or filtration processes
|
|
B2110
|
Bauxite residue (‘red mud’) (pH moderated to less than 11,5 )
|
|
B2120
|
Waste acidic or basic solutions with a pH greater than 2 and less than 11,5 , which are not corrosive or otherwise hazardous (note the related entry on list A, A4090)
|
|
B2130
|
Bituminous material (asphalt waste) from road construction and maintenance, not containing tar (
35
) (note the related entry on list A, A3200)
|
|
B3
|
Wastes containing principally organic constituents, which may contain metals and inorganic materials
|
|
B3011 (
36
)
|
Plastic waste (note the related entry A3210, in list A of this Part, and entry Y48, in list A of Part 2)
—
Plastic waste listed below, provided it is destined for recycling (
37
) in an environmentally sound manner and almost free from contamination and other types of wastes (
38
):
—
Plastic waste almost exclusively (
39
) consisting of one non-halogenated polymer, including but not limited to the following polymers:
—
Acrylonitrile butadiene styrene (ABS)
—
Polyethylene terephthalate (PET)
—
Plastic waste almost exclusively (
40
) consisting of one cured resin or condensation product, including but not limited to the following resins:
—
Phenol formaldehyde resins
—
Melamine formaldehyde resins
—
Plastic waste almost exclusively (40) consisting of one of the following fluorinated polymers (
41
):
—
Perfluoroethylene/propylene (FEP)
—
Perfluoroalkoxy alkanes:
—
Tetrafluoroethylene/perfluoroalkyl vinyl ether (PFA)
—
Tetrafluoroethylene/perfluoromethyl vinyl ether (MFA)
—
Polyvinylidenefluoride (PVDF)
—
Mixtures of plastic waste, consisting of polyethylene (PE), polypropylene (PP) and/or polyethylene terephthalate (PET), provided they are destined for separate recycling (
42
) of each material and in an environmentally sound manner, and almost free from contamination and other types of wastes (
43
).
|
|
B3020
|
Paper, paperboard and paper product wastes
The following materials, provided they are not mixed with hazardous wastes:
Waste and scrap of paper or paperboard of:
—
unbleached paper or paperboard or of corrugated paper or paperboard
—
other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass
—
paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter)
—
other, including but not limited to:
|
|
B3026
|
The following waste from the pre-treatment of composite packaging for liquids, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics:
—
Non-separable plastic fraction
—
Non-separable plastic-aluminium fraction
|
|
B3027
|
Self-adhesive label laminate waste containing raw materials used in label material production
|
|
B3030
|
Textile wastes
The following materials, provided they are not mixed with other wastes and are prepared to a specification:
—
Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock)
—
Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock
—
noils of wool or of fine animal hair
—
other waste of wool or of fine animal hair
—
waste of coarse animal hair
—
Cotton waste (including yarn waste and garnetted stock)
—
yarn waste (including thread waste)
—
Tow and waste (including yarn waste and garnetted stock) of true hemp (Cannabis sativa L.)
—
Tow and waste (including yarn waste and garnetted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie)
—
Tow and waste (including yarn waste and garnetted stock) of sisal and other textile fibres of the genus Agave
—
Tow, noils and waste (including yarn waste and garnetted stock) of coconut
—
Tow, noils and waste (including yarn waste and garnetted stock) of abaca (Manila hemp or Musa textilis Nee)
—
Tow, noils and waste (including yarn waste and garnetted stock) of ramie and other vegetable textile fibres, not elsewhere specified or included
—
Waste (including noils, yarn waste and garnetted stock) of man-made fibres
—
Worn clothing and other worn textile articles
—
Used rags, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile
|
|
B3035
|
Waste textile floor coverings, carpets
|
|
B3040
|
Rubber wastes
The following materials, provided they are not mixed with other wastes:
—
Waste and scrap of hard rubber (e.g. ebonite)
—
Other rubber wastes (excluding such wastes specified elsewhere)
|
|
B3050
|
Untreated cork and wood waste:
—
Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
—
Cork waste: crushed, granulated or ground cork
|
|
B3060
|
Wastes arising from agro-food industries provided it is not infectious:
—
Dried and sterilized vegetable waste, residues and byproducts, whether or not in the form of pellets, or a kind used in animal feeding, not elsewhere specified or included
—
Degras; residues resulting from the treatment of fatty substances or animal or vegetable waxes
—
Waste of bones and horn-cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised
—
Cocoa shells, husks, skins and other cocoa waste
—
Other wastes from the agro-food industry excluding by-products which meet national and international requirements and standards for human or animal consumption
|
|
B3065
|
Waste edible fats and oils of animal or vegetable origin (e.g. frying oils), provided they do not exhibit an Annex III characteristic
|
|
B3070
|
The following wastes:
—
Deactivated fungus mycelium from penicillin production to be used as animal feed
|
|
B3080
|
Waste parings and scrap of rubber
|
|
B3090
|
Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry on list A, A3100)
|
|
B3100
|
Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides (note the related entry on list A, A3090)
|
|
B3110
|
Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list A, A3110)
|
|
B3120
|
Wastes consisting of food dyes
|
|
B3130
|
Waste polymer ethers and waste non-hazardous monomer ethers incapable of forming peroxides
|
|
B3140
|
Waste pneumatic tyres, excluding those destined for Annex IVA operations
|
|
B4
|
Wastes which may contain either inorganic or organic constituents
|
|
B4010
|
Wastes consisting mainly of water-based/latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry on list A, A4070)
|
|
B4020
|
Wastes from production, formulation and use of resins, latex, plasticizers, glues/adhesives, not listed on list A, free of solvents and other contaminants to an extent that they do not exhibit Annex III characteristics, e.g. water-based, or glues based on casein starch, dextrin, cellulose ethers, polyvinyl alcohols (note the related entry on list A, A3050)
|
▼M1 —————
▼B
Part 2
List A (Annex II to the Basel Convention)
|
Y46
|
Waste collected from households (
44
)
|
|
Y47
|
Residues arising from the incineration of household wastes
|
|
Y48
|
Plastic waste, including mixtures of such waste, with the exception of the following:
—
Plastic waste that is hazardous waste (see entry A3210 in list A of Part 1 in Annex V)
—
Plastic waste listed below, provided it is destined for recycling (
45
) in an environmentally sound manner and almost free from contamination and other types of wastes (
46
):
—
Plastic waste almost exclusively (
47
) consisting of one non-halogenated polymer, including but not limited to the following polymers:
—
Acrylonitrile butadiene styrene (ABS)
—
Polyethylene terephthalate (PET)
—
Plastic waste almost exclusively (
48
) consisting of one cured resin or condensation product, including but not limited to the following resins:
—
Phenol formaldehyde resins
—
Melamine formaldehyde resins
—
Plastic waste almost exclusively (48) consisting of one of the following fluorinated polymers (
49
):
—
Perfluoroethylene/propylene (FEP)
—
Perfluoroalkoxy alkanes:
—
Tetrafluoroethylene/perfluoroalkyl vinyl ether (PFA)
—
Tetrafluoroethylene/perfluoromethyl vinyl ether (MFA)
—
Polyvinylidenefluoride (PVDF)
—
Mixtures of plastic waste, consisting of polyethylene (PE), polypropylene (PP) and/or polyethylene terephthalate (PET), provided they are destined for separate recycling (
50
) of each material and in an environmentally sound manner and almost free from contamination and other types of wastes (
51
).
|
▼M1
|
Y49
|
Electrical and electronic waste:
—
Waste electrical and electronic equipment
—
not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, and
—
in which none of the components (e.g. certain circuit boards, certain display devices) contain or are contaminated with Annex I constituents to an extent that the component exhibits an Annex III characteristic
—
Waste components of electrical and electronic equipment (e.g. certain circuit boards, certain display devices) not containing and not contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX
—
Wastes arising from the processing of waste electrical and electronic equipment or waste components of electrical and electronic equipment (e.g. fractions arising from shredding or dismantling), and not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX.
|
▼B
List B (Waste from Appendix 4, Part II of the OECD Decision) (
52
)
Metal-bearing wastes
|
AA010
|
2619 00
|
Dross, scalings and other wastes from the manufacture of iron and steel ()
|
|
AA060
|
2620 50
|
Vanadium ashes and residues
|
|
AA190
|
8104 20
ex 8104 30
|
Magnesium waste and scrap that is flammable, pyrophoric or emits, upon contact with water, flammable gases in dangerous quantities
|
(1)
This listing includes wastes in the form of ash, residue, slag, dross, skimming, scaling, dust, powder, sludge and cake, unless a material is expressly listed elsewhere.
|
Wastes containing principally inorganic constituents, which may contain metals and organic materials
|
AB030
|
|
Wastes from non-cyanide based systems which arise from surface treatment of metals
|
|
AB070
|
|
Sands used in foundry operations
|
|
AB120
|
ex 2812 90
|
Inorganic halide compounds, not elsewhere specified or included
|
|
|
ex 3824
|
|
|
AB150
|
ex 3824 90
|
Unrefined calcium sulphite and calcium sulphate from flue gas desulphurisation (FGD)
|
Wastes containing principally organic constituents, which may contain metals and inorganic materials
|
AC060
|
ex 3819 00
|
Hydraulic fluids
|
|
AC070
|
ex 3819 00
|
Brake fluids
|
|
AC080
|
ex 3820 00
|
Antifreeze fluids
|
|
AC150
|
|
Chlorofluorocarbons
|
|
AC160
|
|
Halons
|
|
AC170
|
ex 4403 10
|
Treated cork and wood wastes
|
Wastes which may contain either inorganic or organic constituents
|
AD090
|
ex 3824 90
|
Wastes from production, formulation and use of reprographic and photographic chemicals and materials not elsewhere specified or included
|
|
AD100
|
|
Wastes from non-cyanide based systems which arise from surface treatment of plastics
|
|
AD120
|
ex 3914 00
|
Ion exchange resins
|
|
|
ex 3915
|
|
|
AD150
|
|
Naturally occurring organic material used as a filter medium (such as bio-filters)
|
Wastes containing principally inorganic constituents, which may contain metals and organic materials
|
RB020
|
ex 6815
|
Ceramic based fibres of physico-chemical characteristics similar to those of asbestos
|
1. Overview
1.1 References
1.2 Identified Requirements
1.3 Related Standards
2. Identified Requirements
Requirements
| Source |
Requirement |
3. Related Standards
Standards
| Source |
Requirement |
|